The MAC1014 Turknelli (The Why’s and $$$)

Habit
3 followers
6 Video Views·Dec 12, 2024
You guys can see there's two shotguns out here today, but the main focus of the video will be
MAC-1014 right here. It's a beautiful looking piece of hardware. Let's get into it. So from
the video I posted the other day, I did replace two parts. I got rid of the velcro for the switch,
and I put a new hand stop on here for the switch, and got the MAC-4 M-LOK hand stop.
And it also feels a lot better than the previous one I had. Not only am I going to be talking about
the parts I put on here, why I put them on there, and obviously my thought process behind it,
I'm also going to be explaining why I chose a MAC-1014 over a Fineli M4. But enough of that,
I'll talk about that at the end of the video. Let's get into the setup. So why did I choose
the MAC-1014 over the Panzer M4 or other counterparts in the same category of clone
Finelis? Well, when you go onto a manufacturer's website and buy parts for a certain weapon,
usually it will say what weapons the part is compatible with. And if you look at the parts
on this thing, the extended bolt drop, charging handle, even the rail in the description says
specifically that it will fit the Fineli M4 and clones like the MAC-1014. It does not say
it will fit clones like the Panzer M4, so I'm assuming that this thing does have a pretty
good reputation based off that. Light spirit! But that's it. Let's get down with it. Looking at this
thing, I didn't change anything about the stock. I kept it how it is. My thought process being,
hey, even if I change it out for a Fineli M4 stock, it's going to work the same essentially.
And I didn't want to spend $600 to change the recoil tube and get the
blast bolt 3 position stock. So, stuck with that. Free of charge. Next on here, I have the EOTech
EXPS-3-0. So I got the version without the QD because I wanted it to sit a tiny bit lower.
The shotgun stock already has a low cheek position, so I wanted to get something not too
high for me. The reason being is so I present the weapon. So, I just bring it up. See, it's
not even touching my cheek. Reload. Boom. I don't have to move my head. I move the weapon to my
eyeball. EOTechs are not the cheapest stocks out there. It's probably around $500 or $600. So,
I'll put the parts here after I've talked about them, like throughout the video,
and in the description, I'll have all the parts listed down there. Check it out.
So, next, I have the Benelli M4 charging handle right here. This thing's pretty solid. I was
going to get it from GG&G, but that charging handle is so big and looks so goofy. I need to
manipulate the charging handle. It won't get in my way. My thumb won't get stuck. I can
easily get my thumb behind it. I believe this charging handle is about $20, $25, $26.
Maybe I'm low-balling it. The next cooler part I got is the extended bolt drop right here. This
is the Braley extended bolt drop. I don't know shotgun parts like that, so I'm going to call it
the bolt drop lever. It's the little piece of metal that the button sits on, and then you press
it, and it goes down and drops the bolt. I'll demonstrate here. Button is right here. Easy
press. I can probably press it in my pinky. This thing was around $100 or $120 for the lever and
the button. Not too bad. For the price, it works exceptionally well. So, not even mad about it.
So, for the match saver, I have the Range Nord shotgun shell holder. I'll show you now. There
is two M-lock holes right here. You do have to drill it a little bit so you can fit an M-lock
section in there, but all I did is use one side so I can angle it up. Obviously, it's plastic,
and metal will push that plastic into the M-lock and keep it there. This thing is not moving. Yep,
here's a little demonstration. Pretty neat. So, this match saver was around $15, $10 to $15.
Not too much. Let's move on. Okay, moving on to the forend. My decision for this forend was mainly
aesthetics. I did end up needing a lot of the sections on here. I did come out liking this a
lot. So, I got the Midwest Industries Benelli M4 forend right here. The Midwest Industries forend
is probably the most aesthetic forend out there for the Benelli M4 that goes past the gas ring,
which is past this part. So, it gives you two more M-lock sections. I really did need that for
these two sections here. From what I remember, this handguard ran around $180 or $280. I forgot.
It was one of those two, close to that. The retention is incredibly good. Of course,
it allows me to put everything I need to put on there without an issue. Next, let's talk about
the hand stop. I did change my previous hand stop for this hand stop right here. This is the Magpul
M-lock hand stop kit. This thing looks really good, and it works really well as well. The texture on
the hand stop and the added section it gives me feels really nice. It really helps me with the
push-pull method of recoil mitigation for shotguns. It's not too expensive. This thing was about
$20, $22. The reason I got it is the last one I had didn't feel right in the hand. It really didn't,
but with the Magpul version, it just feels a lot more natural to hold, and yeah, that's basically
why I changed it. All right, next on the list is the Surefire M640 Dual Fuel. I did use some
already-owned parts. This button I have, I already owned it, so I just threw it on here. All I did
was buy the Magpul button retention M-lock thing. I forgot the name. Not sure how much this costs.
I'll put it up anyways. The button retention was around $15 to $18, and then of course, you guys
know how much Surefire's cost. The light was around $300 something. Here it is. So, why did I set up
my light like this? Of course, when you're going to have a weapon like this of home defense sorts,
which I most likely won't use this in particular for home defense, but if I ever do, I have a light
on it. I can blind them really, really bright, and it's not a bad thing to have on there. Of course,
the extra weight bar from the forend will help with the recoil by that 0.05%. Yes, it does help.
Last but not least is the Plus 2 Magazine Extension. So, this is a choked tool magazine
extension. It was around $45, $46, and it works really well. The main reason I got this is because
five shots is just not enough for me, so I got the Plus 2 on there. The only weird thing is that I had
to use the original two-spring for this. The one that it came with was too long and wouldn't accept
seven shells, only six. And last but not least, the weapon itself. So, I found this weapon on
firearmsdepot.com for $379. It was on sale. They didn't even have a picture for it. I had to look
up the actual weapon on the manufacturer's website. Bought it from there, they shipped it,
and here it is. The grand total with the weapon is here, and the grand total without is here.
I got a lot of comments on my other videos asking why did I get this piece of trash and put all this
nice stuff on it, or just why did I get this piece of trash. Out of all the Benelli clones,
you will probably never find a video on this saying that it's bad. Of course, quality control
is the downfall of all good things, and the cheaper the thing is, the worse the quality
control most likely is. Fortunately, I wouldn't sound lucky to get it, but I'm sure most of them
that get sent out are as good as this one. I am lucky enough to get a non-defective
MAC 10.2. Moving on to the real reasons why I decided to get a cheaper than a more expensive
shotgun.
