My Carry Setup Glock 19.5 (The Why’s And $$$)

Habit
3 followers
3 Video Views·Dec 11, 2024
So, finally, my everyday carry for my Glock setup.
Of course, I'll be going over the whys and the money that went into this particular gun.
So let's get started.
First question y'all may be asking is, how do I conceal such a big Glock?
I essentially have a Glock 17 length, a Glock 19 with an X300 on it, and then of course a decent sized Red Dot as well.
Best answer to that question is going to be the choice of holster.
So, here I have the T-Rex arm sidecar holster with the extra magazine attachment on it.
This is the newer sidecar, it's not the old one that's fixed.
You can bend this all around.
It has a small wing right here that will allow you to carry a slightly bigger grip on your gun.
If you carry a Glock 45 or a 17, this wing will help conceal the extra length on the grip.
Of course, like always, I'll show you an example of me conceal carrying outside.
No cap, it looks like I be nutting on my shirt.
Okay, before we take it apart, I want to talk about everything on the exterior before I talk about the interior of this Glock.
From what you guys can see on the outside, of course the most expensive part is going to be the optic.
This here is a Trijicon SRO.
I'll show you guys the dot now.
So, I got the 2.5 MOA Trijicon SRO.
Let me turn the brightness up so that dot is no more out there.
I got the 2.5 MOA dot on here.
You guys may be wondering why carry a huge optic for conceal carry.
Again, like I said, the holster really helps conceal it a lot.
Of course, I'm going to put it in here and show you guys.
What is the holster?
This gaffer right here is essentially just one straight line across your belly.
It doesn't matter how big the dot is.
People are saying the Aimpoint Acro was too big to conceal carry.
Let me show you guys they're wrong.
Alrighty, I have the Aimpoint Acro on here.
The P2 3.25 MOA.
I'm going to put it in.
It doesn't change anything about it.
The magazine is already up here.
So, as long as the dot stays under that, it should be fine.
If the dot is bulky, that would be a problem as well.
As you guys can see, the dot dang near matches the width of the slide.
So, it doesn't matter.
But yeah, I do have 2 blocks.
This is the backup right here.
I have this backup one which is configured almost exactly the same as this.
Minus the flashlight and the trigger group.
But, I'm going to be talking about my main getup because I rarely ever shoot that one.
This is the one I shoot all the time.
Okay, back to the Trijicon SRO.
The Trijicon SRO runs for about $550, I believe.
I don't think it's $600.
$525 to $550 if I'm correct.
And the reason I use a Trijicon SRO over a Duty Optic like the Aimpoint or the RMR
is because when I carry my guns, I'm usually not rolling around in the dirt or throwing my guns anywhere.
Nothing really happens while I'm concealed carrying.
And if I ever do get into a gunfight ever while I'm concealed carrying,
the weapon is going to be coming out and then in my hand where it is in complete control.
The reason people would use Duty Optics is when they have their weapon exposed on their leg or their chest while carrying it.
And that can be prone to a lot of different things.
While you're actually rolling around with your main weapon and things like that, something can happen to it.
Me, I'm very confident that I'm not going to be bumping this thing like I'm in Afghanistan.
So, that's why I have a Trijicon SRO.
The window is massive and it lets me keep the dot in the window while I'm shooting.
When I had an RMR on this gun, yes, I trained with it a lot.
So, the dot didn't leave the window and I could find it pretty easily.
But with this, it gives you a little bit more room for failure.
And it doesn't hurt to get an advantage over whomever you're going up against.
Next up on here is the Surefire X300.
This is the X300U.
I have the push attach on here.
I do not have the Bravo version on here.
That's what it's called.
Where you have to screw it on.
This is the Cutie.
Yes, I'm aware these are a little more brittle than the Bravos.
But again, same reason I got the Trijicon SRO.
The same reason I didn't get the Bravo for my light.
And of course, this is very bright.
Very easy to use.
It's kind of foggy, but still bright.
So, when I first got my Glock, I wanted a light that protruded a little more than my gun.
When you press the muzzle of a pistol, not all pistols, but most pistols, up against something, it can kick it out of battery.
And when it's out of battery just that tiny bit, your trigger's dead.
Right?
Yes, if I ever got into that unfortunate situation, the X300 would help.
That is why I got the X300.
If I ever pushed my weapon onto something, I could still shoot.
So, the X300 costs around $299 or $300.
Next on here, of course, is going to be the Radian Afterburner and Ramjet Combo.
Do I suck at shooting a stock Glock?
I wouldn't say so, but at the same time, I'm not a professional.
So, this does help a lot.
I am decently accurate with a stock Glock 19.
Of course, the Radian Afterburner, like the choice of my optic, it doesn't hurt to give the user an advantage over the person that is going up against you.
Also, it's just a lot nicer to shoot with the Radian Ramjet here.
So, the Radian Ramjet and Afterburner Combo was around $350 as well, or $400-something.
Well worth the investment.
And yes, this is Cali legal because it doesn't directly thread onto the barrel.
Good for you guys to know if you guys want one.
They have these for, I believe, Gen 3, 4, and 5.
So, you Cali guys are lucky Radian is doing God's work for you guys.
Sorry for the running water in the background.
Watch the restroom.
Since I brought up the Radian Ramjet and Afterburner Combo, I'm also going to bring up the choice of pistol here.
Speaking about the Radian Ramjet, before I go on to the next thing, I'm going to have to say that this makes the recoil better than a lot of $2,000-$2,500 pistols out there.
I've tried a Staccato CS or C2, whichever one it was.
Also tried CZ Shadow 2, Shadow 2 Comp, Shadow 2 Suppressed, and the Dan Wesson DWX.
All those really fancy pistols.
I'm going to just tell you now, this gun right here probably costs around the same as those.
Except you have an optic and it has flatter recoil.
So, I'm sorry, but your .2011 sucks compared to a decked out Glock that costs the same amount.
And it comes with more as well.
You guys have probably noticed this big ol' slide stop up here, or slide release.
The reason I have this is because the stock slide release on a Glock is not so great.
It works, it's not so great.
But I just like this one a lot better.
This is the Tyrant Designs slide stop for the Glock Gen 5.
I got it in silver because I didn't want to wait 20 days for the black version.
This was one of the first accessories I did get on the Glock.
So, this has about, I don't know, over 10,000 rounds through it.
I haven't even kept track of how many rounds I shot.
I just know it's over 10,000.
So that's what I tell people.
This Glock is over 10,000 rounds of pure hate.
That being said, this slide release works perfectly fine still.
Empty magazine, it's a communist mag.
Locks it back, sends it forward.
And that's all that matters.
This slide stop costs around $25, give or take.
Either $25 or $35.
One of those two.
Another part from Tyrant.
This is an extended magazine release.
And for the price, it was insane.
The Tyrant CNC magazine release works really well.
Of course, it's a loaded 17-round magazine.
Slide it in.
Drops it fine.
Empty mag.
Drops it fine.
The stock magazine release on Glocks kind of suck.
Kind of hard to push down because it's half the size of this.
So, I just needed something a little more extended that my thumb can get to and drop the mag out.
This magazine release was around $25 to $35, just like the slide release.
Next up on this list is the SLR Rifleworks Flared Magwell.
So, this thing is a beast, guys.
Yes, I understand for a tiny little piece of metal, it is pretty pricey.
But it is completely worth it.
When it comes to reloading, it's just easy.
And the reason I got the SLR Magwell is because not all Magwells are compatible with certain base plates on your Glock magazine.
So, I suppose if you run stock mags, you should be fine with any other Magwell.
The SLR Flared Magwell is specifically cut to be somewhat universal with any Glock magazine configuration.
Small little example here.
These are both loaded mags, 17 and 20.
So, let's load it up.
I didn't have an issue reloading with a stock Glock at all.
Honestly, the main reason I did get this is my hands are a little bit too big for the Glock 19 grip, but too small for the Glock 45 grip as well.
So, I got something that extended just a little bit and has this tiny little lip that my pinky can rest on.
As you guys can see, it rests directly on that lip and nothing is slipping off.
It fits perfectly for my hands.
One good thing about getting it is that, yes, the Magwell is flared. It's just easier to reload.
So, I'll take that as a bonus.
The SLR Rifleworks Flared Magwell is around $95, I believe.
Okay, the last external part on here is going to be the Handlet Grip Edge Series Grip Tape.
So, the Edge Series Grip Tape that Handlet Grip sells is a rubber-based grip.
So, it's not sandpaper. It doesn't rip up your shirt or rip up your hands if you have little girl hands.
I mainly just didn't want to get my shirt caught because when a shirt gets caught on your pistol grip, it really imprints because it just sticks there.
So, the reason I picked Handlet Grip over any other grip tape out there is because, first off, it has a really good reputation.
It's only around $14-18 and it comes with these two pieces up here which do play a really big role in reducing recoil.
Everybody knows that a competition gun usually has something called a gas pedal on it.
It's a little device that sticks out of either your left or right side of the pistol that just lets your thumb rest on it, like so.
So, this grip tape allows me to put my thumb right here and just sit on there.
It might not look like a lot of room here, but I can really set my thumb on that ledge and just grip it.
You can probably see my thumb bulging out like that because of all the pressure I can actually put on there without it slipping off.
Let me not forget the suppressor height sights, actually.
These are the Trijicon suppressor night sights, the suppressor HD sights.
I wanted something to co-witness the SRO.
My initial reason was, oh, backup iron sights in case something happens to the optic.
But after watching a few videos, it's like, yeah, if the optic breaks, you can't use your iron sights anyways because there's glass in the way, which is very, very true.
But if the glass is shattered to where there's lost glass in here, in a life or death scenario, I will get my finger, shove my finger in the glass, push it out, and now I can use the iron sights.
Very stupid, yes, but again, life or death situation, if I need to aim, I'll do whatever I have to do to be able to aim properly.
The Trijicon suppressor height HD night sights run for about $110, $115.
Okay, before I get into the internals of the Glock, I'm going to be talking about some modifications I did for myself that make this weapon a little easier to handle.
Some modifications I did on my own, I did sand this area so my fingers can fit a little better on the grip of the gun.
You guys can see right there, it rides up a lot higher now and it's just more comfortable.
Another thing I did, you guys might have noticed, is my magazines fall straight out whether they're full or empty.
In the magwell, I'm not sure you guys can see, good thing I have a QD on the X300, but if you guys can look in there, I sanded the living heck out of the magwell on the inside.
Me sanding the inside of the magwell allows the mags to just slip right out without actually causing any extra harm to the Glock.
Okay, time to get into the internals, which is not too much, it's only like two things really.
People say when you change the internals of a Glock, you're making the reliability of the Glock a lot worse than it being stock.
I have to disagree with you, it just depends on what you put in your gun.
So right off the bat, you guys can see this is not a stock spring.
This is a captured full tungsten guide rod I got off of the Glock store, I'm not sure what it's called, but I'll put the name and price somewhere here.
It was around $150, yeah, pretty dang expensive, but well worth it, really helps with recoil as well.
I have a 13 pound spring in here, I wanted to get the OEM 15 or 18 pound spring, I forgot what the OEM Glock spring weight is, but I had to get the 13 because that's all that was in stock.
This is one of the first Glock parts I did put on here, maybe 8,000 rounds plus in this.
Again, I stopped counting around 7,000, 5 or 7,000, and that was a long time ago, I've shot this quite a lot.
So I don't want to give you guys an inaccurate answer or overestimate, so I'm just going to lowball it a little bit.
This thing has more than 8,000 rounds on it, and it still functions perfectly fine.
Functions with the Radian Ramjet afterburner, functions with 70 grain frangible ammo, all the way up to 147 grain of course.
On the upper receiver I do have an aftermarket striker, it is the Johnny Glock's enhanced striker, with the 4.5 pound striker spring.
And then of course, I forgot what this little piece here is called, but it came with the trigger, I replaced that as well.
I'm not sure what it's called, I think it's the extractor pin, of course I'll be including the trigger group and the pin as one unit because it came with it.
But for the striker it was around $85, $80 or $85, and yes, it helped a lot.
The enhanced striker made the trigger pull feel so much more nicer to pull.
Now on to the lower parts.
This is the Johnny Glock's trigger group right here, the combat trigger.
All this carbon getting on my hands because I don't clean my Glock ever, but here it is.
This was about $200, $199, something like that.
The trigger shoe I have on here is made by Killer Innovation, and this was about $100 or $110, give or take.
The reason I got the Johnny Glock's trigger set, I'm going to call it the set because I essentially got everything they sold for the Glock, which is really only two things.
I personally wanted a trigger that was a little lighter than the OEM Glock trigger, which I do recommend you guys get some training time on the OEM Glock trigger.
This trigger group combined with the trigger shoe, which makes it flat and really pushes it back to the wall, and the striker makes this gun feel amazing.
It makes the Glock feel absolutely incredible.
Showcasing the trigger here.
So here's the wall, the give, and the break.
Reset it, and then it resets to the exact same position, so it has the same wall, give, and break on the reset.
It's not inconsistent.
I did forget one part. It is the mounting clip for the SRO.
This is the B&H base plate for Glocks that fit the RMR slash SRO platform or footprint.
That was around $100 too, I think, or $70, $80. I forgot.
It's a lot better than the MOS plates that come with the Glock MOS.
On to my actual EDC.
So this is kind of like a subsection, but when I do carry it, I don't carry it all the time, but when I do, I carry a Benchmade knife.
I believe it's called the Adamas knife. I'm not too sure.
I forgot what it's called, but it's a pretty solid blade.
Very, very sturdy. Very thick.
That's what I carry.
On to the important stuff here.
This is my holster.
Like I said in the beginning, T-Rex arm, sidecar.
The holster itself costs around $99, and then the add-on is another $40, so the total is going to be around $140.
This is my go-to holster.
I have tried Tier 1. My friend's Tier 1, but of course he's right-handed and I'm not.
That one also feels good.
I feel like if I were to get another one, I would get a Tier 1 holster, but I do carry the T-Rex sidecar.
Alright, so last piece is going to be how do I actually conceal this thing with T-shirts, long sleeves, jackets, and all that.
Jackets and long sleeves are a little more lenient because they can be a little bit more faggy, and they'll just fall over it.
No one will ever notice.
But T-shirts, the only way I can tell people how to conceal carry easier and more concealable with a bigger pistol is go to the gym and do a lot of bench press.
The bigger and burly your chest is, the more slack there is going down your shirt.
That being said, your gun will get covered by essentially your chest.
I will give a demonstration with sweatpants on. It's not really a good demonstration, but here it is.
So this is not really a great example because I have a combat shirt on, but my chest is essentially pushing the shirt out enough to where it's covering the chest.
But if I didn't have a chest, which I can simulate by sticking my pelvis out like this, you can see it a lot more.
But yeah, I don't think I missed anything. I'm pretty sure I went over everything I have for my EDC.
I'm not a very fancy dude, so all I really carry for my EDC is my gun, an extra mag, and maybe a knife.
Let me talk to you guys about why I have it set up this way before I end the video.
So why do I have a smaller mag in the gun and a bigger backup magazine?
The reason for that is because while you're standing up or sitting down, the holster will kind of form to you.
It's easier to conceal carry with a shorter magazine, but I do want a little more than just 15 rounds, so that extra two may come in clutch one day.
Of course, for the extra mag, it's holding 20 rounds because it's a lot easier to conceal the second magazine.
You can essentially have a 32-round magazine in here and you wouldn't see it while standing up.
If you guys are looking to get this exact setup right here, including the baseplate.
I believe this baseplate is only $20 on Block Store, so I will add it to the total price for this setup by itself.
The grand total of everything coming together is going to be here, and then the attachments will be here.
Alrighty guys, let me know in the comments if you guys would buy a Block 19 and deck it out to your specific standard.
Potentially being better than any gun you ever shoot in your life.
Or would you guys rather buy a 2011 that's $2,000, $4,000, maybe even $7,000 and you still need to buy attachments for it.
Have more maintenance for it because it's not really a duty rated weapon.
Thank you guys for watching. I'll see you guys next time.
