How to make SPOON rings! Using original antique spoons

Jewelry Making
51 followers
Hi everybody! I went on a little hunt the other day, visiting local antique shops. I wanted to
find unusual and unique pieces and turn them into jewelry. I was lucky to have found several
original and interesting spoons. Let's make something with them. So now you might be wondering
what is the next step to turn these spoons into rings and honestly it's actually more simple than
you might think. What you need to do is cut this part over here and then use a ring bending tool
to shape them and because they already have such a nice patina and tarnish on them I'm going to
try and see how I want to finish them. I probably won't completely polish them but I'll try to keep
some of the patina and just bring the shine back out. When you look at the backs of these spoons
you can actually see that these ones you can see where they were soldered and attached and I'm
wondering if this will actually withstand bending but with these ones you can see it's one piece of
metal. It looks really good and I'm honestly not worried at all that it might break anywhere. So
we'll see how they're going to work. I'm very curious. I'm going to use a jeweler's saw to cut
the spoon right over here. It might be a little bit too long but that's okay because I'm planning to
overlap it. Now this one I can't decide whether I want to make it a ring or maybe I should make
it a pendant and I think I like the pendant more just because then it can be placed like this
whereas as a ring it would have to be placed on a side. So I would probably have to cut right
underneath the circle and then make a little hole in here so I could place a jump ring in there.
By the way for cutting this I'm using 5-0 saw blade which probably is not the best choice.
Maybe try to go for like 2-0. It will be faster and easier.
These edges are pretty sharp now so I'm going to file them down and sand them and just make
them nice and smooth. I'm using these files for now. This one's very coarse, this one's
medium. I think that's cut too and this one's finer so I will leave this one for last.
To bend the spoons and create rings I will be using ring bending tool by Pepe tools. I hope
that it will be enough for me to bend it and strong enough for me to bend it because I don't
really want to anneal them but let me show you if that works. Okay we will see if I can actually get
away with bending these as they are without annealing them. So I'm going to go for the size
7 first because I'm not sure which one I want to go for and 7 seems like a good choice to start
with. I can always make it a bit bigger or a bit smaller because they will be open so they won't
be soldered or anything like that. So I can experiment with the sizes and pick the one
that fits the best. I'm actually just a little bit scared that this part may break off but I guess I
won't find out until I try so let's go for it. I'll start from this side or no should I start
from the... let's just start from this side. Let's see. Okay it actually bends quite well so far.
Not a lot of force required. We're getting to the tricky part. Is it gonna break?
Oh okay it didn't break. Success! I'm being very careful where and how I bend. As you can see I try
to make sure that it's even everywhere. Okay this one is much harder to bend. I might need to anneal
this one. Okay let's see if that helps and if it's going to be easier now to bend. Well much easier
you guys. So make sure you anneal it before you start working on it. It's just so much easier.
This should be going right this direction now. You can also use your mandrel and rawhide mallet
to make sure that the fit is perfect and that every little bit of the ring is curved properly
and also you can work on the sides this way as well if you want to adjust it.
Unfortunately with this one it didn't work. It broke but this is actually the one I suspected
might break because this part over here it just didn't look very secure and since I didn't anneal
it because I wanted to keep the original natural patina that was already on here I think because of
this it broke. So when you do that either make sure that you anneal it and you can always apply
patina later on or just be very very careful. Here I'm using my rotary tool to polish some of the
pieces. I also drilled a hole in the pendant and I'm polishing it removing old patina and tarnish.
Now I want to finish these by polishing them with for example steel wool or you could use
these polishing pads which are also great for removing patina. And this is how the finished
rings and a pendant turned out. I tried different finishes on them and I'm very happy with the results.
I hope you enjoyed this video. Thank you so much Pepe Tools for sponsoring this episode.
You can find the ring bending tool by Pepe Tools in the description box under the video.
Thanks so much for watching and I will see you in the next one. Bye!
