Easy DIY Rings, Earrings & Pendants Using Crystal Clay and Chatons - How To Make a Ring

Cozy Beads
9 followers
Sep 6, 2025
Today’s video is all about making easy jewelry and having fun! As usual :) I’m making easy diy rings, gorgeous diy earrings and of course diy pendants using crystal clay and beautiful Swarovski crystals in the process. And what an easy process it is. A few minutes max and you have your own DIY jewelry ready to wear. How satisfying. Learn how to make your own jewelry at home and you will not regret this decision I promise, It’s so great when you can make something from scratch. Especially when it's a piece of sparkly jewelry :)
Hello my super duper friends and happy new year!
Ready or not here I come with another tutorial and today we're gonna be making some earrings,
rings and pendants. Now before we start let me point out this one thing, subscribe! That's it
really. And turn on the notification bell and comment on my videos. That really helps my channel.
All right let me start this tutorial now. So as you might have guessed already you will need
some wire. I'm going for silver because I'm running out of the gold one and no not real
silver just silver plated copper wire 20 gauge approximately 8.3 inches. And just to keep things
interesting I shall not tell you which piece of jewelry I'm making now. Feel free to guess and
of course you are not allowed to skip any parts of this video. I mean you can but that will decrease
my watch time which is not great for the channel and also you could miss something really important
like I don't know cutting wire or something. All right back to this tutorial. As you probably
noticed if you didn't skip this part I have made a spiral and now I'm creating a cup by turning the
wire in circular motion. I'm using my index finger to hold it and then pushing against the wire
lightly with my thumb while slowly turning the cup around. I hope this explanation somehow made
sense and if you didn't then well don't worry you still have your imagination. So please use it
instead of my instructions. I'm sure your earring will turn out even better than this one. Oh damn
it! Just told you what it was all day long. Once I had the wire cup deep enough it should be able
to accommodate a point back crystal I used my round nose and flat nose pliers and created a
There you have it. You know what I'm making now. The excitement is gone. It's over. It's not gonna be
fun anymore Helena. You might think. But I promise there is more. Much more to come. But first let's
finish this pendant. You could use glue for this and I have done previously but it turned out pretty
messy so I'm opting for crystal clay. Silver color. They do all sorts of colors actually. You need to
mix the hardener with the resin in equal parts and then there is working time before it starts to harden.
Oh and when it does harden eventually it's solid. Oh my god I dropped the pendant so many times on
the floor and it just stayed put so I guess it works. I made sure there was enough but not too
much clay in my cup. I just didn't want to end up with clay all around the sides of my crystal
really. Yeah and of course I had to decide which crystal will look the most appealing on my
thumbnail. Yep this one will do. So I push the chosen crystal in and use the toothpick to clean
up any mess. Let it dry overnight and there you have it. I bet you didn't expect jewelry making
to be so easy peasy lemon squeezy but it is or can be. It can also be very lemon difficult. And now
all you need is chain. All you need is chain. Chain is all you need. A few shots for the Instagram
and onto the second DIY. And yes you have guessed we will be making a ring or earring. Oh gosh I
can't remember what it is now. Hmm let's see. I straighten 4.7 inches of 20 gauge wire with my
nylon jaw pliers, bend it and create it a swirl again. Hey and a little trick. Use some blue tack
to stick your crystal onto the spile. Once you have the crystal in the middle you should see
like a wire ring slash circle around your crystal. This way you will see how big you need the swirl
to be and then make the cup again. And another trick. You could use some object to wrap your wire
around to make the cup but I was feeling lazy and the only thing I could find was this pen and of
course it kept moving because of the spring inside so it couldn't be us just made it with my fingers
instead again. I then created a small loop with my round nose pliers but it was still quite big and so
I made it even smaller and of course I forgot to film it but I assume by now you have been using
your imagination constantly as my instructions are not that clear sometimes and so I'm sure you
can absolutely picture a small loop being reduced in size. I then made the earring post. Oops sorry I
had to and besides it's kind of obvious now. Yeah so I made the earring post about three quarters
of an inch and filed the end of it. You can use file or cup burr for this. I also decided to show
off by making my own jump rings but you don't have to do that. You don't have to show off. I really
really wanted to use this beautiful deep ocean blue Swarovski crystal and of course ended up
using it since I just like doing things I want to do. But this time it was not the wisest decision
of my life because I then couldn't find a second crystal to make it a pair and since we are making
earrings this could be seen as a little bit of a problem but don't worry I do have a few more
tricks up my sleeve. Some of these are more obvious than others but tip number one cover your earring
less ear with hair or a plaster or a hat or a cat, mat, baseball bat. Feel free to leave your suggestions
in the comments. Tip number two only face people slash animals slash aliens with your earring full
ear side. Be sure to smile a lot and give out positive vibes only to distract from the fact
you're acting like a complete weirdo. And now the most obvious tip make a mirror image of yourself.
I know this one was so predictable and everybody surely knew it but I had to throw it in anyway.
Hey and why not share more tips and tricks on how to keep this earring in place. You can of course
use a standard butterfly earring bag or wait for it you can make some yourself. My voice just
changed. Make them using a hot glue gun like so. You can watch my tutorial on how exactly I made
them. I shall link it in the description box as well as all the other materials. Or a nice wise
lady in the comments once told me she just cuts her hot glue sticks and makes them that way.
Rather clever. Thank you for sharing nice lady. And I'm really sorry I forgot your name. I also
cut this one to make it a bit smaller. Pictures please. Alright for the ring I'm using 12.2 inches
of 20 gauge silver wire. Wrapping it around an eye shadow stick which I still haven't used. Alrighty
so since I keep saying I haven't tried this eye shadow stick I decided to try it now whilst editing.
So I think I'm gonna keep it for making jewelry. By the way I also sneezed like 100 times in a row.
I don't really know what I'm telling you but it's interesting and it was quite quite nice.
Anyways once you start twisting your wire you will have one long and one short wire to twist.
The short one needs to be about 3.5 inches even a little bit less and the long one will end up
being approximately 6.5 inches. Then you will need to decide how big you want your ring to be.
I forgot to stop twisting the wire until it was too late and the twisted part was two and a half
inches meaning way too long for me. But I decided to stay in denial and pretend nothing has happened
and thought I could work it out later. Wrong! It should have been more like 2.2 inches but
everybody is different so you need to measure your fingers ladies and gents. I then bent the rest of
the short wire and kind of wrapped it around the long wire and then started to make a spiral on the
top of the cut and exposed short wire. Of course I repeated the steps from the previous tutorials
in this video and made a cut and just in case you were wondering why my wire is so long well
I was still in the process of figuring out how much I would need so I started with long wire.
The measurements I'm giving to you should be more precise. Should be. I can't promise though.
Next I'm creating swirls on the top and bottom of the ring. The two short wires are 1.2 inches each.
Adding a pointed back Swarovski crystal again the same way as all the other ones.
And since I can't help it I'm sticking some flatback crystals onto these spirals
and I didn't have any more colors so I went for the ones I had pink and blue.
And here we go. This is the time when I realized that this ring will never ever fit me.
Not the index finger, not the thumb, not even the middle finger. Something needs to be done about it.
But first let me take just one teeny tiny picture for my Instagram.
Okay so I decided to create a loop from the twisted wire and then bend and wrap the blue
stone spiral and let it sit on the top of the loop. Then I wrapped the pink one too and I think
it's a win-win situation. Very pleased with myself. Now I can actually wear it. It's a beautiful
beautiful ring. Hey so I just showed you two ring tutorials. You are welcome. Love you.
And here I am again filming the outro of the video. I know I don't really need to be here.
I just wanted to say hello. Hi. I just miss you so much. Would be so nice if I could film more often but
it's not possible at the moment. Yeah hopefully soon. Please subscribe to my channel and hit the
notification bell and the likes. Hit the comment section below. Say hello. Okay I'm being awkward
now so I'm gonna go. Bye. Yeah sorry I just needed to get something from the cellar. A bottle of wine.
I'm gonna have a bottle of wine before the baby wakes up.
I'm just kidding here. I don't have any wine. Anyway I'm gonna go now. Bye.
