Sleek Twisted Copper Wire Earrings Tutorial - Beginner Wire Wrap Tutorial

Jewelry Making
51 followers
Hey everyone, it's Abby from Abby Recreations,
and today I'm gonna show you guys
how to make your own pair of sleek copper earrings.
So for this tutorial, we'll be using one thick base wire,
which we'll fold in half,
and I'll give it this cool little doubled effect here.
And then we'll be using two small weaving wires
to secure these beads right in the center of the design.
So the exact wires that we'll be using today
are two eight-inch pieces of round one millimeter
or 18-gauge wire.
I am using dead soft copper wire.
You can also use brass wire.
You can use sterling silver or filled sterling silver,
anything that is a solid metal or a filled metal,
which means for this design,
we won't be able to use our plated metals
because we will be using our hammering block and anvil,
and we're gonna go pretty hard on the hammer,
and that can damage any plated wire.
So let's just stick away from those today, okay?
We are also going to be using four pieces
of 26-gauge or 0.4-millimeter wire.
These are just about three inches long.
These are just to secure the beads.
And for our beads, we have two six-millimeter focal beads,
and then I have two three-millimeter round copper beads
and two two-millimeter round copper beads.
For our materials, like I mentioned,
we are gonna be using our hammer
and hammering block or anvil today.
If you have not already bought one of these,
I am going to try and convince you to do it
because it is so much fun,
and it adds such a cool effect to your work,
and they're really not that expensive.
I've got some links in my link tree
and the information below the video.
So this one is called a half-dome chasing hammer,
and I really like it because it has this round head,
which means that you avoid any of the sharp edges
whenever you're hammering, and it's really easy to use.
We are also going to be using
some chain nose or flat nose pliers.
So I use these.
I got in my original wire wrapping kit years and years ago.
It's the color-coded beadsmith kit,
the one that I suggest in the info link
because you get so many different pliers
for such a cheap price.
I rarely use these
because I don't really know why I would use them,
but it turns out that this head here
is just the perfect size to make these bends.
It makes your life easier, but it is not necessary.
For this video, you can still create the same effect
with just a basic set of chain nose pliers, okay?
You'll also want some round nose pliers.
We'll use those at the end
to make that little loop at the top
where the earring hook will go.
These are nylon pliers.
Once again, not necessary,
but they do help straighten your wire in the beginning
so you have a nice straight piece of wire to work with.
And of course, our wire cutters.
I always recommend flush edge wire cutters,
which means that they have a completely flat base right here.
This is the best affordable,
yeah, affordable brand that I have been able to find.
They're about $10 a pair
and they last a decent amount of time
and they give the cleanest cut
that I can find for this price, all right?
My other wire cutters are about $80 each.
So yeah, this $10 pair works pretty well in a pinch, okay?
All right, so one other thing is that
if you do not have this black pair
from the color-coded beadsmith kit
or another set of pliers
that is exactly six millimeters wide,
you're just gonna wanna grab a measuring tape
and a permanent marker
so that you can mark exactly where we want
to make these bends in the earrings today.
That way, we'll all end up with the same thing, okay?
All right, guys, grab your tools
and I'll meet you at the next step.
Starting with these two 18-gauge base wires,
we are gonna grab approximately the middle.
You can measure if you want,
but I did give you guys a bit of leeway with the wire.
There's a little bit extra to allow for mistakes.
I'm just gonna estimate the middle point.
And one thing you can do to make your life easier
when making these earrings
is grab both wires at the same time
and we can make all the bends at the same time.
So if you have these pliers right here,
go ahead and grab them.
If not, grab your chain nose pliers.
All right, we're just gonna make
one simple bend in the beginning, okay?
So just grab your wires firmly.
And I just like to kind of push up with my thumb.
You're gonna go for a little bit less
than a 90-degree angle.
It's all right if it's not perfect.
We can always go back
and adjust these angles a bit later, okay?
Just gonna give it another little pinch on the other side.
All right.
So remember, if you are making both of these
with these pliers, you can go ahead and continue.
I am going to separate these for now
just so I can show the guys who don't have these pliers
how to make these earrings
using the marker and a measuring tape.
So sticking with the original pliers
and then I'll come back to you guys
with the chain nose pliers, okay?
That was a little less than 90 degrees.
Just go ahead and keep working into a diamond shape, okay?
I'm gonna pick the pliers up, move them to the other side.
And then we'll have one wire crossing
under or over the other.
And there we go.
So usually I just kind of eyeball this,
but I'm gonna, since I do have a pair made,
I'm just gonna kind of hold it up
to make sure that we're working with a similar length here
and then I can give you guys the height.
Yeah, so that's gonna be about the same.
It's a little wonky right now, but that's all right.
Like I said, we can go back
and adjust any symmetry that we need to.
For now, I'm gonna give you guys a size
and we are working with about seven to eight millimeters
in this empty space right here, okay?
All right, so now we're gonna do,
or I'm gonna do the same thing with this other piece
and show you guys how to do it
with just a basic set of chain nose pliers.
So what we can do
is whenever I measured this before
when it was hammered, it was about six to seven.
So I'm just gonna make sure I'm telling you guys the same.
Yes, it's about seven millimeters.
So all you're gonna do is take your marker
and permanent marker is totally okay
to use on these types of wires
because most of the time it'll come off
with the oils in your skin while you're working
or you just take a bit of rubbing alcohol afterwards
and you can clean it all off.
It doesn't damage the metal.
All right, starting from that inside part of the wire.
A little harder to do under the camera,
but that's all right.
Within that seven millimeter mark.
And I'm just gonna try and bend it right there.
Okay, so I just placed my pliers like a tiny bit below
because you gotta keep in mind that the wire is a bit thick.
And if it's not perfect, that is totally fine.
This is really not the most important part of the design.
You do want it to be between six to eight millimeters
in accordance to the size of the bead that you're using.
There we go.
From here, even though I'm tempted to eyeball it,
I'm not gonna be lazy
and I'm gonna get my little measuring tape back out.
And we're gonna do the same thing on this side.
All right, about seven.
And we'll bend.
So one thing that I like to do when making these earrings
is to change which wire is on top.
So now I'm realizing that this one,
the right wire is on top.
So for this one, I like to put the left wire on the top
just to kind of switch it up a bit
and create some balance in the earring design.
So just like we did with the other one,
we'll just kind of bend these in.
Working with the symmetry of the diamond.
Remember to always grab your other one
and you can hold them up and see.
I do feel like this one that I did measuring
is a tiny bit bigger, but I can go in.
Oop, yeah, it is a little bit wonky, isn't it?
So to fix this little side that's longer than the others,
I'm just gonna grab my chain nose pliers.
And since we're working with a solid metal
and I don't have to worry about scraping the plating off,
I can just kind of work my pliers in there
and just kind of pinch.
Too short in that side.
It was really just off by about a millimeter.
My ruler slipped whenever I was marking it.
But to fix it, it's that simple.
I just go in and pinch that little side
until it looks even.
So now we can get back to where we were
to make sure that these are looking about the same.
So I'm just gonna try and lay one on top of the other
to make sure that they're looking the same.
This goes a lot quicker
whenever you use those other pliers,
just because you can do all of these steps
about the same time.
Oh, I am struggling this morning.
All right.
So they look pretty similar.
It's just this backside is a tiny bit taller.
So I am just going to pull those wires in a bit more
before we get started.
All right.
So you can give them one last look
from about a bit of a distance
just to make sure that they're looking all right.
And then once you're happy with this step of the design
and everything is looking symmetric,
we will go to the next step
where we will pinch and twist.
So if this hurts your fingers,
you can use your nylon pliers
to hold this while we twist, okay?
If not, we're just gonna use our little pinchers right here
and hold on tight.
So we are going to twist this wire five times, okay?
So one, two.
All right, I'm gonna take a little pause
and explain that whenever we're doing this,
we really want to keep an even V shape.
That way it doesn't look like one wire
is just wrapping over the other
and make sure that you're applying equal pressure
when twisting.
It gives you a really nice, pretty twist, okay?
Three, four.
All right, straighten anything up if you need to.
Now, if you want these to be longer,
you can keep twisting, all right?
I am just trying to imitate the same design that I have here
and that was five twists.
All right, working with this other one.
This time, we're gonna twist in the opposite direction
just because this wire is on top of the other one
and it's going down.
So I'm just gonna twist in the opposite direction
going with the natural way the wires are going.
One, two, three, four, and five.
All right, take a little look.
Make sure you like everything and everything is straight
because now we are going to grab our little anvil
or hammering block and our hammer.
All right, so whenever we hammer,
we're gonna hammer on what would be the backside.
This is, these are pretty similar.
It doesn't really matter which side that we choose on
but it is good information to know for the future
if you are just starting out with your little hammer.
So whenever I'm hammering,
I'm gonna want to keep my hammer moving, okay?
That way I don't apply too much pressure
in the same spot all at the same time
because that can help to distort the wire a bit
and cause like little blobs in your wire.
So right now, we're just gonna gently hammer
around everything to give it a bit of a equal pressure
in the beginning, okay?
And now we are really gonna beat things up.
So I do want this to have a heavy hammer design,
especially on this wire base right here.
Okay, that looks pretty good.
I'm gonna hammer a tiny bit more on that part.
I think that looks perfect for me.
It's all up to personal taste.
If you want more or less hammering,
that is up to you guys, go for it.
All right, so we will do the same thing with this next one
and then I will meet you guys back at the next step.
All right, we are almost finished with our frame.
Right now, we are just going to get rid
of these excess wires.
If you feel inspired to play around with these,
please, please, please go for it.
Follow your intuition.
If you want to kind of bend them down,
do some swirls or something, I highly recommend it.
Those are some of my favorite moments
when I'm doing tutorials.
It's whenever I feel inspired to kind of go off the path.
But for you guys that want to stay on the path with me,
we are just going to fold this wire,
the one that is on top, okay,
in the natural direction it wants to go.
Just kind of bend it back, right?
And then we are just going to clip it off right there.
Okay, and I'm kind of holding on to this wire
so it doesn't fly off.
Okay, and then just grab your chain nose pliers
and we'll go in there and give it a little pinch.
And now to finish it off,
we're going to grab our round nose pliers
and I'm just going to pinch on that other wire.
Gently remember, because our round nose pliers
can cause those little indentations.
It's inevitable, but we can prevent how bad it gets.
So we are just going to gently work that other wire around.
This is the little loop that we're creating
where we will put the earring hooks.
And I'm going to keep pulling it around
until it kind of falls into place
just above that other wire.
If yours doesn't quite land there, don't worry about it.
It's all right.
I'm going to take my chain nose pliers,
kind of squish everything down.
And I'm going to gently just pinch that loop
as I continue pulling that wire.
Okay, I'm going to flip to the back side
so you guys can see.
Kind of just want it to fall in place
right above that other one.
And then we're going to clip it off just right in there.
And then grab your chain nose pliers
and we will pinch that in.
All right, I'm also going to give a little pinch here
just to kind of line everything up.
All right, feel free to straighten out
anything that needs straightened out.
Check the rough ends.
I have a little bit of one right there,
so I'm just going to pinch it in a tiny bit more.
All right.
And you're going to go ahead
and do this same little trick to the other earring.
And then I'll meet you guys in the last step,
but we're just going to add a little flair
to this open space right here.
Grabbing one of those small weaving wires,
we are going to start by placing it
just on top of the frame,
maybe with like about a half inch or so tail.
And what we're going to do
is we're going to wrap it around towards the top.
And you can use your chain nose pliers for this
because it can be kind of itty bitty and annoying.
And since we won't be using the rest of this wire,
there is no risk in damaging it with our pliers.
So I'm just punching right here with my left hand.
And I'm just going to pinch that tight.
And we're going to wrap three times going up here
towards the top of that little diamond.
All right, pull nice and tight.
Now we just want to slide that on up there.
We can go ahead and clip off that little edge.
We want to clip it off as close as we can.
And then we'll pinch that in.
Make sure that sharp edge is pinched in really nice.
And then that is where that one will go.
We're going to do the same thing with the other one.
So this will move up and down for now.
That's totally fine.
This other one will do the same.
Just kind of hold it about halfway down
and we'll curve that wire around
so that we can guide it
through the top part of that diamond.
And we will wrap this around the same about three times.
Cut that off and we will also pinch that wire in.
And we're going to slide both of these off
so they're in the same spot right there.
I'm just going to run these wires through my fingers a bit
without any kinks.
And now we're going to add on our beads.
So we are going to start with this two millimeter bead
followed by the three millimeter
followed by the six millimeter bead.
So we'll just bundle those two little ends together.
Fish one of these tiny beads out
and we're going to work both of those ends into the bead.
And I'm going to work those coiled wires up to the top.
And we're just going to push these beads up in there.
You may need to pull some of the wires separately.
So what I do is I just kind of hold on right here
as I'm working these into place
so that they're both kind of even at the top.
And then they should fit just snugly
right into the middle of that diamond.
Now to finish it off,
I like for the wires to be on the back side wrapping around.
I just think it looks better
with the way that the tiny wires lined up
once they're oxidized.
This may just be kind of like an OCD thing for me.
So if it's annoying, don't worry about it.
But I do like the way that it looks in the end
with those wires behind wrapping up around.
So you're just going to kind of pull those wires to the side
and make sure everything is still looking a bit lined up
up here.
And then this time you're going to do the same
where we kind of work up towards that little peak
in the diamond.
So you see how I'm just wrapping around that base wire
and I'm going to pull that tight.
I'm going to go ahead and do it once on the other side
just to make sure that the tension is going to be even
before I wrap it a few more times.
All right.
Let's go ahead and wrap that two more times
and then we'll be done with our first earring.
Whenever you're wrapping these,
just make sure that those coils stay neatly lined up.
You don't want one crossing over the other.
It doesn't look like a big deal in the beginning,
but once you oxidize it, that really does stand out.
Maybe you can kind of pinch them together like this.
All right guys, let's make sure everything's looking good.
I'm going to give this one final tug on the back
and now we are good to snip these off and pinch them in.
All right.
So just repeat that with the other one
and we'll throw on some earring hooks
and you guys will be ready to go.
All right.
So if you want to get this really cool antique look effect,
this is called oxidizing.
And in order to do this,
we use a liver of sulfur gel or powder.
I'm a fan of the gel.
I'm not going to cover that in this video,
but I do have a separate video showing how to do this.
It's really easy to do.
I'm going to put a link up here at the top
to show you guys how to do that.
And yeah, if you have any other questions,
please feel free to let me know in the comments
and please, please, please share your photos with me
on my Instagram, Abbey Road Jewelry.
I love to see what you guys create.
All right guys, have fun with this tutorial
and I will see you next time.
