Van Conversion Fan, Solar, & Ladder | Van Build Series

Adventures of A+K
724 followers
25 Video Views·Oct 26, 2024
raise the roof raise the roof we finish
that roof so after a month of being back
in Seattle I'm finally in Austin to work
on our van again and I'm really excited
to be here we've gotten a lot done the
past few days and I'm excited to share
it with you so in this video I'm going
to share everything on the roof and on
the side of the van so our fan our solar
panels and our ladder and since I'm
gonna hop between each one I mean like
the timecodes below and in the
description in case you just want to see
one aspect of it so before I begin I
wanted to just kind of give some clarity
around what our YouTube channel is we
hope to not be confusing but we feel
like right now we're kind of confusing
on like what our mission is so first and
foremost we are a travel vlog we want to
share our travels with everyone but
since we're building the van we really
want to share that too since that's kind
of our our vessel to travel more in the
future but since we can't work on the
van full-time we also can't travel
full-time kind of hopping between travel
and van videos so please be patient with
us once we're on the road there gonna be
tons of travel videos we'll talk about
life on the road in the van as well to
share all the cool places we get to go
so thank you guys for following along we
really appreciate it
promise things won't be so hopping back
and forth day
so the first task we did on the roof was
the fan and having a fans important to
just have more air circulation hopefully
cool things off a bit we got this maxed
air fan which has a range shield a fan
and a vent it doesn't have a remote but
it has this little handle right here
where you can open it thank you
it kind of see right there it's opening
up this is what it looks like when it
opens itself up lots of leaves really
great sealing job looks we placed it in
a spot because of all the kind of ribs
on the roof and this was the only flat
spot kind of wish that we could have
moved it back more towards where our bed
will be but no so hopefully it works out
ok so Adam actually installed the fan
our first weekend with the van I
unfortunately was working so he had to
do it by himself with the help of my dad
and unfortunately we just didn't get the
best footage of actually putting it
together we missed quite a few steps
from filming it so as we've learned
vlogging while building a van by
yourself is very challenging so instead
of sharing our step by step process here
we're gonna list all of the steps below
in the description and we're gonna link
to a youtube video that helped us a ton
when getting the van all set up
[Music]
the next big task was installing our
solar panels which just like everything
on the vandal proved to be a little bit
more challenging than we thought it
would be we have four 100 watts compact
design renergie solar panels we got
three right here and then one right here
with the fan we struggled to figure out
the best way to attach the panels to the
van we had these rails installed when we
picked up the fan and unfortunately we
couldn't afford one of the nice racks to
put the solar panels on there about four
thousand dollars so instead of getting
one of those we had to come up with our
own homemade option so here's what we
did we bought these stainless roof rack
sliders which is just such a tongue
twister from Euro camper and they
basically just slide into the rails that
we already had installed we bought the
van and that way we'd have to drill into
the van or drill into the rails which is
awesome
and then we bought these aluminum angles
which were obviously aluminum at first
but we sanded them down and sprayed them
with black bedliner just because we
think it'll look a little bit nicer from
afar when you're looking at the van and
so what we did is we cut these to be the
exact size we need to attach to the
panels and then attach to the rail and
then we drilled in holes where we will
be attaching everything so there are
some existing holes on the solar panels
and we read that drilling into the
panel's can void the warranty so we're
trying to avoid that at all cost so
we're using the holes that exist so
these two holes align perfectly with the
holes on the panels and then this hole
lines up with where it will meet with
the rail so no drilling involved which
is awesome
[Music]
so one thing that's good to notice the
top of the van is not flat it's kind of
curved there's kind of some ribs at the
top so in order to make sure the solar
panel is lay flat we have added spacers
to both the solar panel attachment and
the rail attachment and this is what it
looks like so we use boxes to lift up
the panel's so we can start connecting
the wires and it's pretty
self-explanatory you just kind of
connect the positive to the negative
connect them like so we're also using
zip ties to hold the wires together our
next step is to use this cable clamp
which looks like this to drill a hole in
the roof that way the wires can go down
you can why aren't everything on the
inside so first we're just going to mark
the holes where we need to drill this
little guy
[Music]
and this is what it looks like when it's
done so it's suctions it so much that
water cannot get through here it's
actually made for boats so we feel
pretty confident that we will be water
free from the roof these solar panels
will be powering the batteries inside
the van which will power our
refrigerator our outlets than anything
that needs power we have two lithium
iron batteries from R energy which we'll
cover in a later video when we tackle
electrical but these solar panels are
going to be the way that we work
full-time in our van and have you know
our laptops charged or cameras charged
and everything so they're going to be
awesome
in the final task for the roof is the
ladder so we got this ladder from
aluminous partially cuz we just like the
way it looks on the van it looks pretty
cool but also so we can get up to the
top easily they clean the solar panels
and just any other reason we would need
to get up there in case something gets
messed up this house is pretty easy and
quick here's how you do it the first
thing we did was attach the bracket to
the bottom of the ladder for the next
step we secured the brackets for the
ladder at the top these aren't like the
permanent attachments that we're going
to use but just to hold it in place and
this should be 13 inches apart so next
we put the ladder up and put it in its
spot and clamped it and are holding it
that way we know where we need to drill
the holes something that's super
important to know is you need to put
these in the rails while you're putting
in the solar panel ones that way they're
in there otherwise you won't be able to
get them into the spot you want and it
turns out alumina sent us the wrong
bolts since they sent us the wrong bolts
we're just using the ones they did send
to hold this into place for right now
and I can go buy the new ones in a
little bit and then we will get this
thing off secure so you drill all of the
holes and then bolt them on in
[Music]
then we put the ladder on the bracket
and secure it all up so this is a cap
screw which is what was supposed to come
with the ladder but they sent us the
wrong thing so I ran to Home Depot now
we're gonna finish off the ladder
we have a ladder now it's time to test
it out
and that's a wrap on the roof of the van
it feels awesome to finally make some
progress on this bad boy it's been
sitting here for a month just untouched
waiting for someone to love it and work
on it and turn it into a home so I'm
really glad to be here to get some major
stuff done our next step is to spend the
next couple days working on the plan so
drawing out plumbing electrical how we
plan to build the cabinet's the bed the
walls all that fun stuff so I'll save
you from that boring video and hopefully
when I'm back next week I'll be able to
actually show you building stuff inside
the van so I'm hoping to actually get
some stuff up on the walls next time so
fingers crossed and in case you missed
it we named our van brisket which rhymes
poet and I didn't know it so we need our
van brisket for a few reasons one we
love barbecue especially brisket and now
that our vans named brisket we won't
barbecue significantly more so it's
making us hungrier which isn't a
surprise we also need a brisket because
we are in Texas we're building our van
in Texas and it's going to be an
official Texas van so it's a very Texas
kind of word and then lastly we need two
brisket because cows are big and black
and white like our van however we know
that brisket doesn't come from those
kind of cows we want to make that clear
but it's the thought that counts right
so that is the end of our roof vlog we
hope you enjoyed it we hope you learn
maybe a thing or two and I'll see you
next time
[Music]
okay I'm ready
[Music]
