The M2 Browning machine gun was first conceived in 1918, as a request by General John Pershing of the AEF for a large-caliber antiaircraft and antitank machine gun. John Browning scaled his M1917 water-cooled .30 caliber design up to .50 caliber, and the first prototypes were test fired in November of 1918. Impetus behind the project faltered after the Armistice, but Colt continued to develop the gun during the 1920s and 1930s. It was first adopted in 1922 by the US Coastal Artillery as an antiaircraft gun, but significant manufacture would not come until World War Two. By this time, the gun's main role had shifted, from antitank to being an aircraft armament, and some 2 million were made during World War Two, primarily as aircraft guns.
The M2 remains in service today, highlighting the brilliance and longevity of John Browning's designs.
Strap in guys, it's going to be a long video.
Hey guys, thanks for tuning in to another video on ForgottenWeapons.com.
I'm Ian McCollum, and I am here today at Bear Arms up in Scottsdale, Arizona,
taking a look at one of the bigger guns in their reference collection.
This is a Browning M2HB, or Mod Deuce as it's sometimes colloquially known.
The HB stands for heavy barrel, because it has a heavy barrel.
But this is only one of a number of ... early configurations of the Browning M2 machine gun
that were originally built. And ... first off, it's really significant to point out that this has been
in ongoing standard US military service longer than perhaps any other firearm still in service,
longer than any one that comes to mind. These were originally developed in 1918.
Now they ... were technically first adopted by the US military in 1922, we'll get to that in a moment.
But these guns are still in ubiquitous widespread service today.
There is a move today to upgrade them to the M2A1 configuration,
which we'll talk about at the end of this video.
But just the fact that a gun developed literally over 100 years ago, first adopted as of this filming,
98 years ago, is still good enough to be in wide-scale service.
That is amazing, and it really is testament to John Browning's genius in firearms design.
The story of this gun goes back to 1918. And in the spring, in April of 1918,
the American Expeditionary Force, under General John Pershing,
formally requested a heavy calibre machine gun from the US Ordnance Department.
They wanted something to be both an anti-aircraft gun, because aircraft, bombers in particular,
were getting pretty big. Bigger than you might think of for a World War One aircraft,
you know, which we kind of think of as being made out of twigs and cloth.
The Germans were developing some pretty darn impressive heavy bomber aircraft.
And the US military, looking at the effectiveness of the 11mm Vickers guns for ... balloon busting,
among other things, looked at that and thought,
well, we like the 11mm calibre, which is close to half inch,
but what if we had a high-velocity cartridge that was that big?
Now the Germans were developing exactly this sort of thing in their 13.2mm TUF,
Tank und Flieger, machine gun.
The Germans would never quite get the machine gun ready before the end of the war,
but they did ... issue the ammunition with the single-shot Mauser Tankgewehr rifles
to be used as anti-tank weapons.
And they were reasonably effective in that role.
Not perfect, but during World War One ... tank technology, tank armour,
was such that a gun like this would have been absolutely deadly against enemy tank attacks.
It would have been a fantastic defensive weapon against tanks.
Of course, Germany also never did get tanks into World War One in any substantive numbers.
The French and the British, and by extension the Americans, did.
And so really Pershing was looking for an aircraft gun,
and he was also being a bit proactive,
figuring, well, if the Germans copy us on these tanks,
we're going to want a gun like this to defend against them.
Anyway, John Browning gets the message.
He is America's premier machine gun designer, small arms designer in general really.
And what he does is he takes his Model of 1917 .30 calibre machine gun
and scales it up to .50 calibre.
And internally, and we'll take this apart in a minute,
internally this is almost a copy of the Browning .30 calibre.
Now the original guns that Browning built as .50 calibre guns were water-cooled,
just like the original .30 calibre guns were water-cooled.
That was, especially for an anti-aircraft gun, that was a dérigueur.
You know, of course you're going to make it water-cooled.
... Basically all the machine guns in World War One are water-cooled.
That will go away over time and leave us with the heavy barrel configuration that we have here.
Anyway, ... the request is first made in April of 1918.
The ... first real test firing is done in November of 1918.
So barely a one-year development time to get what would become the M2
from concept to actual firing prototype.
And that again is a sign really of the genius of John Browning.
As well as the work of both the Colt and the Winchester companies who were instrumental
in doing the cartridge development and also the gun prototyping
to get this thing off the ground in a hurry.
In fact, at one point a newspaper reporter asked John Browning
about what went into the design of this gun.
And he credited it to,
"... one drop of genius in a gallon of sweat."
Which I think makes a lot of sense.
This was a design that was largely in hand, and it just needed to be scaled up.
So Browning was able to pull that off just in time for the war to end.
Now at the very end of the war, when they see the results of this first test firing,
the Ordnance Department is really enthusiastic,
and they place an order for 5,000 in anti-aircraft configuration,
and 5,000 in tank configuration.
However, those orders would never end up being fulfilled.
They would be cancelled because the war ended,
and the urgency of needing a whole pile of heavy machine guns disappeared.
Moving forward into the interwar years,
we will see only one element of the US military adopt this.
Now it was the water-cooled version of this at the time,
and it was designated the M1921 .50 calibre machine gun.
And that one agency, or service branch, was the US Coastal Artillery.
Which we don't really think of anymore because we don't really expect anyone's going to be
coming trying to shell the US from off our coastline or invade us.
But at the time, hey, that's a major part of military planning.
And the Coastal Artillery wanted a good, emplaced,
heavy machine gun for anti-aircraft use.
And the M1921 Browning fit all of those characteristics.
The water-cooled nature made it capable of sustained fire.
The .50 calibre cartridge was one heck of a powerful cartridge
that was very well suited to taking down aircraft.
The rate of fire was high enough to work in this regard.
And they mounted them on big old tripods, kind of like this one's on.
But, you know, held them several feet up off the ground so they could be
swung around 360 degrees, fired at high elevation to attack aircraft.
They liked these guns.
The problem was most of the other service branches didn't.
Pretty much everyone wanted a different sort of tweaked version of the gun,
and they all had real problems with them that led to nobody deciding to adopt it.
So for the infantry, this thing was way too heavy.
Especially the water-cooled version, even heavier than this thing.
It just wasn't mobile.
They also found that it was troublesome to hold on target.
There's a lot of recoil generated by this thing, as you might imagine.
And if you don't have a really good tripod design,
the gun kind of bounces off target and becomes ineffective.
So infantry had issues with that.
The cavalry had problems with its weight as well.
How do you move this thing around on horseback?
They came up with ways, but it was kind of too heavy of a gun to engage infantry perhaps.
The US Air Service initially was interested in this for mounting on aircraft,
but early aircraft were frankly a bit too fragile to deal with the recoil
and the muzzle blast from this thing, so that was a problem.
In order to mount them in vehicles for ... the new armoured service of the cavalry,
well, the problem there is some of the guns you want to be able to feed from the left,
and some from the right, because you're mounting these in tank turrets.
And if you're mounting them in pairs, you don't want to have both of them
feeding from the same side, because the parts will interfere with each other.
If you're mounting just one, well, depending on the configuration of the turret,
it may be more convenient to feed from the left to the right.
Nobody really liked a single standard pattern of the gun.
So Colt retained ownership of the design, and ... they were selling these guns
commercially during the 1920s and 1930s, but not in large numbers.
In total between 1922, when they really standardised the M1921 design,
in 1939, when World War Two starts to begin,
they sold just barely over 11,000 of these guns total to everybody.
And that includes overseas contracts, which they made,
sales to the US Air Corps, the ... other elements of the US military.
11,000 guns, which is a total drop in the bucket compared to the total
eventual World War Two production, which would be about 2 million of them.
So, this time spent during the interwar period wasn't wasted though,
because a lot of development continued to be done on the gun.
Now initially Springfield Armory, which was an official arm of the US military,
or US government, aided Colt in the development of the guns.
They had engineers assigned at Colt to be working on these guns,
and how do we make them better, how do we manufacture them more efficiently,
that sort of thing.
And in particular one Dr. Samuel Green, who was a Springfield engineer assigned to Colt,
made a couple of really important changes, or developments, to the gun.
One of them is the charging handle, which is very iconic here,
in that the charging handle is actually cam.
And it gives you mechanical advantage to charge the gun.
The original M1921 just had a charging handle sticking straight out the side,
like a .30 calibre Browning,
and that took a lot of strength to actually cock the action.
So they give it the cam charging handle that is a significant improvement.
And Green comes up with a design for the internal components
that allows it to be easily changed between left-hand and right-hand feed
without needing ... much in the way of replacement parts.
The bolt can be swapped from left to right
just by changing a configuration on one of its parts,
which I'll show you when we take this apart.
That was a major improvement in Colt being able to produce guns efficiently enough
to sell them to a wide variety of services that wanted them in different configurations.
Not directly Green's responsibility, but the other huge ... fundamental improvement
to the gun that took place during this time period
was the development of a universal receiver.
So if you think about a Browning 1917 water-cooled gun, or a Vickers, or a Maxim,
the front trunnion has the base for the water jacket,
and it is riveted into the two side plates.
So the receiver of this gun is not a single unit, it is two steel plates,
and then a top plate and a bottom plate,
and they're all riveted together into a box that holds all the internal parts.
Well, on all of the earlier guns you would need a different front trunnion
for an air-cooled gun like this as compared to a water-cooled gun.
Which meant that ... once they put the receiver together at the factory,
that gun's configuration was fixed.
The improvement that they made to this, and it was the first Browning to be done this way,
was to make a universal receiver and front trunnion
that could be changed between air-cooled and water-cooled configurations.
When you combine that with the interchangeable feed,
it meant all of a sudden ... most of the parts could be interchanged
between any of the different configurations of guns.
By 1933, and by the way, that is when the designation was formally changed to M2,
combining a couple of early M1921 variations.
They re-designated the whole thing the Browning M2.
And you had three major variations, and then each one of them could be had
either as a fixed mount gun or a flexible mount gun.
So, for example, the aircraft version, which was a light barrel, air-cooled,
because of course it's flying around on an aircraft,
and the slipstream will give it all the cooling that it needs.
You could have a ... fixed mount aircraft gun mounted, say, in the cowl of an aircraft,
or you could have a flexible mount one mounted in a turret.
Similarly, you had water-cooled guns that could be either fixed or flexible mount.
And you also had this version, which would ultimately become the most popular,
which is the heavy barrel version.
This was intended to allow basically the air-cooled, ground-utilised version of the gun.
Because you don't have a slipstream like an aircraft to cool the gun,
so you need a heavier barrel so that the barrel can absorb more heat
and have more sustained fire before it gets so hot that you have to change the barrel.
So we have all these different versions being manufactured.
Everyone kind of wants a different type.
You want heavy-barrelled for the cavalry, for a tank gun.
You want the light-barrelled, lightweight, air-cooled version for the aircraft guns.
Ultimately it was really the Navy that kept the M2 alive.
The other service branches were not hugely interested in it.
They were willing to keep testing it, but they never did adopt it.
The Navy saw the possibilities.
And ultimately by the time World War Two started,
you might think of ... the .50 calibre as being kind of obsolete,
especially as an anti-tank weapon.
The late 1930s are when we start seeing 20mm anti-tank rifles,
and even those are obsolete very shortly into World War Two.
Well, what kept this alive was the idea that it was a good balance.
Because it is relatively small calibre for an anti-tank weapon, it maintains a high velocity.
If you look at the 20 or 30mm cannons that were in use during World War Two as aircraft guns,
they have quite low velocities.
And that means their range isn't all that great, especially in air combat.
The .50 offered a good compromise of muzzle velocity, weight of the gun,
recoil energy of the gun.
Aircraft are now able to stand much more recoil than their World War One counterparts.
But still you get, you know, a high velocity 30mm cannon mounted in the wing of an aircraft,
and you have real structural issues that you have to address in order to handle the recoil.
And the .50 was much more forgiving that way.
It also had smaller, lighter ammunition.
You were able to carry a lot more ammunition for a .50
than you could for something like a 20mm or a 30mm cannon.
So all these things put together mean that the Navy and the Naval Air Service
were still interested in these things,
and that's what allowed it to be there and be available when World War Two began.
Now the reason that the M2 is such a long-lived gun
is that it's actually gone through a couple of basically mission changes.
So when this was first developed for World War One,
it was intended to be an anti-tank gun and also an anti-aircraft gun.
Well, of course by World War Two it's not really an effective anti-tank gun anymore.
However, by World War Two it becomes an ideal aircraft armament.
Not anti-aircraft, but in the aircraft.
And you'll see a lot of Allied aircraft mounting piles of these things.
You know, the US had fighters with six or eight .50 calibre M2s
mounted in their wings as primary armament.
And that allows what was by that point an obsolete anti-tank weapon to stay in service.
And in fact as an aircraft weapon would be the primary role of the Browning M2 in World War Two.
This particular example was manufactured by High Standard.
We'll take a look at the markings in a moment.
High Standard made 306,000 of these guns during World War Two
specifically for use in aircraft.
Now by the time we get to the 1950s, the .50 calibre is really obsolete as an aircraft weapon.
It's not powerful enough, its short-range missiles are becoming a thing,
20mm Vulcan cannons are becoming a thing.
And again you have the opportunity for the M2 to become obsolete and drop out of service.
But instead it becomes a common vehicle mounted gun.
Now originally these were, and during World War Two,
these were also mounted on ground vehicles primarily as anti-aircraft defensive weapons.
That's why you see them mounted on tanks, mounted on half-tracks.
It wasn't so much to be shooting at axis ground vehicles, it was for air defence.
And it will maintain that role a bit longer than it does the aircraft role,
and then it kind of transitions into being a general-purpose vehicular mounted gun.
And that's where we still see it in service today.
So that has been a very long-winded, I think,
introduction to the origins of the M2.
Let's go ahead and pull this apart right now, and I'll show you what the internals look like.
Alright, the first step in disassembly is taking off the barrel.
And the first step in taking off the barrel is to pull the charging handle back just a little bit.
So what I want to do is see that little square feature
through that witness hole in the receiver.
So I pull the charging handle back until that's there,
and then I can unscrew the barrel.
Now if the barrel's really hot because I've been shooting it a bunch,
this handle acts as a crank that I can use to unscrew it.
If the barrel's cool, however, I can just crank it by hand.
There we go.
And then the barrel comes out.
Next up I need to take the spade grip assembly off the back.
There's one extra thing I want to show you here.
Normally this, on a World War Two gun, this is the trigger.
And you just hold it down to fire.
This gun has had one of the few service life upgrades to the M2.
This is actually a semi-auto hold open.
So what we do is if we release this, there's a little collar right there
that will hold this down, like so.
If I release that lever, this is now in semi-auto mode.
And what will happen is when I charge the gun, or when the gun cycles,
the charging handle will stay locked back to the rear
until I depress this button and it goes forward.
Then I can fire a single round click, which will cause the gun to cycle,
and stay locked open again.
So ... it's not really a semi-auto trigger.
It is simply an automatic hold open that locks the bolt open after each shot
so that you're then limited to single shots at a time when that's desired for the gun.
For example, if you're trying to find range,
perhaps without letting the enemy know that there is a .50 calibre machine gun in the area.
Anyway, in order to disassemble the gun I need to have this unlocked in the semi-auto position.
Now the next step of disassembly is to remove the spade grips.
There are two latches back here.
I need to pull this one out, and I need to pull this one up.
And if I hold these two in that position,
I can then lift the spade grips off the back of the gun.
Now if you've disassembled a Browning .30 calibre, you may have been wondering about the recoil spring.
On the .30 calibre guns you have to basically lock the recoil spring in place
before you can take the back plate off.
On the .50, the recoil spring is already self-contained.
So I'm going to push it in, ... push it slightly in that way, and then pull it out.
And that is our full recoil spring.
There's a lot less to it than you might expect.
We're getting close here.
The next bit is I need to take this little pin out.
That is what connects the charging handle assembly here to the actual bolt, the internal components.
So there's a little cutout that you can see right there.
And I want to bring the bolt and that pin back to that position.
Then I can take this locking pin out.
And then pretty much all the internals, the rest of the internals, can come out.
Now there's a little detent that we have to bypass in here.
Right inside that hole is a little detent that locks this in place.
And we can actually use our recoil spring as a tool to take that out.
So this pin right there I can push in here.
There we go.
It's going to allow me to get this started out the back.
And then I can pull out all of these bits.
Well, I'll pull them out as two pieces.
If you're a totally slick pro, these all come out as one assembly.
So as they're laid out inside the gun, here are the three main components.
We have the buffer body, the barrel extension, and the bolt.
And like I said, this is basically exactly the same as the ... 1917 guns, just scaled up a lot.
So I'll pull our bolt off there.
One of the distinctive features of the M2 is that it has two of these crossing tracks.
These are the tracks that the top cover has a feed pawl that runs in.
And this converts forward and backward motion of the bolt
into side-to-side motion for the feed mechanism.
Now I can push this in and rotate this internal plate to change from one of these to the other,
which is one of the key elements in switching the gun from left-hand to right-hand feed.
One of the very distinctive features of the Browning machine guns is the accelerator lever here.
And what this does is it slows down the opening of the gun.
So when the gun is fully in battery, like this,
I've got the extractor here just out of the way,
you can see this accelerator lever is vertical like that.
Well, when you fire the bolt is going to try to move backward.
And as it does, you can see that it's going to pull the accelerator lever with it,
which is going to pull the barrel extension, and the barrel is threaded into the front here.
So the barrel and barrel extension are a significant added mass
that are going to have to move rearward before the cartridge case can be pulled out of the chamber.
That's going to delay the gun's opening and reduce chamber pressure when it does open.
This is fundamentally a short recoil operated gun,
and this accelerator lever gives it a little more delay on top of that.
So once the whole thing has retracted about that far,
then these two components are going to stop,
and that is largely done through this buffer spring.
Pull these two apart, this is a very clever design here.
And we have our buffer spring in the back of the buffer body there.
So that obviously is a big assist to the relatively small mainspring in there.
With all of those elements removed, we are left with the receiver and body of the gun,
which is a much more manageable weight and size by itself.
So there are a couple other elements to look at in here.
We have a top cover operated by this butterfly latch.
So rotate that up and the top cover opens.
If you want to change this from left to right hand feed, of course you have to rotate this plate.
You actually have to replace the top cover with a left-hand top cover,
or right-hand top cover, whichever you're looking to use.
And then the mounting brackets for these feed pawls are identical on both sides of the gun.
So you do need to reverse these, and some of these parts are interchangeable,
some of them, like the cartridge stops, are not.
So changing sides you need the appropriate new cartridge stops.
But that's pretty much it, a new top cover, new cartridge stops,
reverse the bolt, and you're good to feed from the opposite side.
This of course isn't done anymore today because we don't use water-cooled .50s anymore,
but this front barrel support can be removed and replaced with ... a complete water jacket
if you wanted the water-cooled iteration of the gun.
Our receiver markings are here on the right side under the feedway on the receiver.
This is still marked Browning Machine Gun because that was required with
Colt's original contract with John Browning, his original agreement with Browning.
But what we have here, you'll see this is manufactured by the
High Standard Manufacturing Company of New Haven.
During World War Two there would be eight different companies manufacturing
Browning M2 machine guns for the US military.
Those would be Colt, who was the original, High Standard, Savage,
the Kelsey-Hayes Wheel Company, Buffalo Arms Company,
a company called Brown Lip Chapin, which is a division of GM,
the Frigidaire division of GM, and the AC Spark Plug division of GM.
And they would make between them aircraft versions, water-cooled fixed versions,
water-cooled flexible versions, heavy-barrelled fixed versions,
heavy-barrelled flexible versions, and heavy-barrelled turret versions for aircraft.
With a grand total of about 2 million made.
One interesting thing about High Standard in particular,
in 1940 the British government ... wanted to purchase a bunch of .50 calibre machine guns from Colt.
Colt was busy with other work, and so they actually licensed production to
the Kelsey-Hayes Wheel Company and High Standard.
So High Standard is one of the first companies to get into the
.50 cal manufacturing business for World War Two.
They manufactured, I think it was something like 11,000 for the British government.
And ultimately High Standard would end up being the most efficient manufacturer
of these guns in the United States.
By 1944 their total price for the gun ... they'd been able to drop it to $245 per gun,
which still included something like ... I think $39 of profit margin.
So they were both the lowest overall cost for Browning M2s,
and also the highest profit margin per gun of all the US manufacturers.
To the point that they would actually twice refund the US government
money on the basis of it being deemed excess profit.
And in total ... High Standard alone would refund the US government
more than $2 million during World War Two,
based on their ability to reduce cost of their Browning M2 production.
This particular gun was almost certainly originally an aircraft gun.
It's been rebuilt in the M2HB ... current service configuration.
In total High Standard built about 9,300 water-cooled Brownings M2s during the war.
They built 18,700 and change of the ground configuration, what this gun looks like today.
And then they built 306,000 of these in the aircraft mounted configuration.
Well, there you have the whole thing disassembled.
There's your Browning M2HB.
Really actually a very simple gun to take apart,
which is both surprising given that it is nearly a century old,
and also perhaps not surprising in that if it were a lot more complicated
it probably wouldn't have survived in service to this day.
The Browning M2 of course remains in service today.
From its early origins as a water-cooled gun,
to its mid-life use as a fixed mount aircraft gun,
to its current use in the M2HB, or heavy barrel configuration like this,
it is a tremendously long-serving, venerable, and incredibly effective firearm.
Now there are improvements that can be made to it.
In fact, even as we speak today, a lot of the US military inventories
were being upgraded to the M2A1, which ... basically just gives it a fixed headspace.
So it gives it a quick change barrel that doesn't require
the adjustments to headspace and timing that the original gun does.
Frankly, when these were first being designed, when the design was being perfected,
factory tolerancing, getting interchangeable parts that were
tight enough in tolerance to have interchangeable headspacing without any modification.
Being able to do that ... across eight different manufacturers,
you know, for two million guns during the war,
that was a little more of a challenge than the factories were able to meet.
And that's why the Browning guns maintain their adjustable headspaces.
It's not because the adjustable headspace was really a good thing,
although there are benefits to it.
It was because that was kind of necessary to meet the production requirements.
Today it's a different matter.
Today we can manufacture barrels that have the tolerance to be
quick change and totally interchangeable, so that's being done today.
In theory ... this isn't the most efficient way to design a .50 calibre machine gun,
but this is good enough that it just doesn't make economic sense
to throw these away, the ones that are already in service.
Because they don't really tend to wear out to the point that they can't be just,
you know, a few parts repaired and put back in service.
Because of that, it's not cost-effective to replace them with anything brand new.
Kind of the same sort of thing we see with the M16 family.
Until there's really a fundamental improvement in the gun,
these will stay in service, I have no doubt.
So there have been some experiments with other .50 calibres,
most notably the M85, actually like 50 years ago now.
The M85 existed because they wanted a more compact gun to fit in US armoured vehicles.
And the M85 was an attempt at a .50 calibre machine gun that
used a receiver that was about two-thirds as long.
So it saved a non-insignificant amount of space inside a tank turret.
The problem was it was not an effective design, it had a lot of reliability problems.
It was susceptible to dirt and malfunctioning, and it was pretty quickly scrapped.
And the M2 came back and took its place happily, as always.
So, hopefully you guys have enjoyed this look at the ubiquitous Ma Deuce.
We are going to take this gun out to the range tomorrow.
We will go ahead and do a headspace and timing check,
and I'll walk you through how to do that.
And then we're going to do some shooting, which should be a tremendous amount of fun.
So, once again a big thanks to Bear Arms for giving me access to some of the guns
in their reference collection like this one to take a look at.
They're a fantastic group of folks, definitely check them out.
If you're ever in their area up in Scottsdale.
And stick around tomorrow for the video out at the range.
Thanks for watching.