Inside Iran’s MP5 Submachine Gun Copy: The Tondar TK9

Battlefield Firearms
3 followers
4 Video Views·Mar 26, 2026
This week, Jonathan takes a closer look at what appears to be a classic MP5… but isn’t quite what it seems.
Join us as we examine the Tondar TK9, Iran’s reverse-engineered copy of the iconic Heckler & Koch submachine gun.
0:00 Intro
0:57 The Iranian Tondar TK9
2:30 External Differences Explained
4:00 Firearm Details and Markings
12:00 Build Quality and Finish Compared
16:00 Global Use and Export Variants
18:00 Final Thoughts on Fit and Finish
19:00 Where These Turn Up Today
20:00 Outro
AI Generated·May contain errors
Hello and welcome to What Is This Weapon? I'm Jonathan and this is
in theory one of my favourite firearms, the Heckler & Koch MP5. MP5A3, meaning telescoping,
sliding buttstock, probably most people's favourite version, although the solid stock of the A2
is pretty good as far as accuracy goes, but it makes it permanently longer. So this is of course
the version that was made famous in 1980 at, appropriately enough, the Iranian embassy
siege. I say appropriately because this is, and also in theory, because this is not a Heckler &
Koch made MP5, it's not even a Royal Small Arms Factory Enfield or Nottingham Small Arms facility
made MP5. It is in fact an Iranian made MP5. Now this isn't written on it anywhere, but this is
officially called the Tondar, which I believe means thunderbolt in Persian, and it has an
alphanumeric designation as well, a TK9. Logically that's Tondar and 9mm, I'm not sure what the K
stands for. If anyone does, do let me know. Information on these is a bit thin on the ground,
perhaps for obvious reasons. You're probably wondering where we got this. I don't know,
which is often the case. It came to us from the Ministry of Defence,
or a branch of the Ministry of Defence in 1996, so it would have come from somewhere in the Middle
East. We don't know where, it could almost have been anywhere, but it might have made sense if it
was Iraq the first time around. That would be my speculation. It is a straight-up copy of the MP5,
in this case A3. The difference in markings, which we'll show you. A few differences in
build standard as well, very minor. The main difference is that it's much worse quality.
I think it's fair to say that, and you'll see that in a moment when I
strip this down and compare it to another one. But before we do that, the external differences,
and I'll cover markings as well. So, from the tip, as it were, well, you might not immediately
notice the difference, but if I grab my handy-dandy Enfield made MP5, essentially identical to the H
and K, you can see the classic tri-lug on the muzzle there, which is standard, where it's
essentially this annular ring with the angle on it, but it's cut away to form these three lugs,
which allow you to fit a quick-detach suppressor, or the optional flash suppressor that also
existed. The Iranians opted to, I guess, not finish that component, or that part of the barrel,
because it's integral to the barrel, because they weren't going to fit any accessories.
So that creates a slight difference. We actually lack the reinforcing ribs on the cocking tube,
so the classic MP5 has these ribs. Those are not present on the Tondar. They're smooth up here,
so there are the ribs on the classic MP5, and you can see they're lacking on the cocking tube on
this one, and also no checkering on the polymer piece of the cocking handle, and it does look
like the cocking handle itself might be upside down, even though the polymer casing for that
is facing the right way. So I think this may have been misassembled, and in any case,
they've done away with the checkering as well. There's a slightly thicker... this piece here,
which is welded onto the main receiver stamping, has been made of just a slightly heavier gauge
steel, at least in this portion. So that's a slight difference as well. There is nothing else
substantial... well, part of the problem in diagnosing the differences is that some of it's
the result of just not machining the final bit away. Certainly in terms of the muzzle,
the rear sight base is a slightly different shape. It's more faceted on the Tondar. It's smooth on
the HK. I think that's just where the casting, or I think probably the casting, has been machined
away with a bit more care, if I can put it that way. Then we come to the magazine well. It's the
same on this side, apart from the markings, which we'll come back to in just a second.
Flipping around, the original flavour has this sling clip for use with the configurable HK MP5
sling. It can be clipped into there as part of its... that's one of the options, basically,
and that's riveted in place on a sizable pad of pressed out steel on the magazine well.
Well... sorry, terrible pun. That pad is much smaller on the Tondar and there's no option for
having the clip, the sling clip. So they've again decided they don't want that sling.
I don't think I've identified which sling came with these, but it clearly wasn't the... or if
it was the standard MP5 sling, they didn't care about that mode of the sling. So that's different
on most of them. I have seen some Iranian... pictures of Iranian MP5s that do have a full-size
pad, but still not with the clip welded on. That... what I'm calling a pad on the... I nearly
said real MP5. That joins up with the reinforcing rib on the bottom of the mag well. Not immediately
obvious when you look at it, but that's how it actually is. The stock is going to be the main
departure, I think. So the... this is very detailed stuff, I know, but if you were identifying one of
these and you didn't have the markings, let's say you only have components or a fairly... a poor
photo or clip, video clip, as we sometimes have in some of the work that I do, these features
might help you. There are differences between these two on the buttstock, however, I think
that's just a change in HK build standard over the years. So the stock release catch is a different
profile, the attachment is different as well, but I'm not going to go out on a limb and say that any
of that is to do with Tondar production, because I'm fairly sure it isn't. I think there are changes
over time with these things. This is a later pattern, not the later chunky pattern of A3 stock,
but a slightly simplified version of this earlier pattern stock, which is on the Tondar. However,
what does set it apart is the fact that the stock takes some serious force to get off, because again
this isn't made to the same standards as HK or other licensed production, because this was a
production deal that was done with Iran in the days of Bashar, and that's G3, HK33 and MP5,
and it's just that whenever the deal would have expired, because the regime had changed and
relationships had changed, Iran simply carried on making them. So the licensed copies become
unlicensed copies, and there's not much that H&K can do about that. I guess a difference,
as we move into markings, there is a notable difference in that the top of the gun where you'd
normally see something, serial number, maybe proofs, and maybe indication of the maker,
isn't there. So there's nothing on the top of the pressing on the Tondar. Whereas, just to
prove my point, on this Enfield one we have EN, which by the way I suspect stands for England,
rather than Enfield, haven't confirmed that yet, but anyway, what it is, MP5, typically they do
say what they are, the Iranian one doesn't, and serial number, in this case a C series serial
number typical of the British manufacturer or assembly, and a 1987 London set of proofs on
this one. That's by the by, that's the German slash British one. The pattern of lower receiver
obviously changed, if you know the MP5 at all, changes over time, goes from this finger-grooved
version that's on both, usually marked SEF in English, but there are versions that have round
counts instead, which will become relevant in just a second, and it moves to the smooth-sided,
slick-sided, pictogram type lower that's maybe more famous at this point. So this is up to,
up to, and then optional, you could choose which one you wanted through the 90s,
and the current version they sell is just the more modern looking version, I suppose, that doesn't
have the more ergonomic shaped grip, because it turns out if you shape a grip for certain types
of hands, it fits those hands really well, but not others. So there's a constant war between people
who like finger grooves and those who don't, and we have the sort of thumb shelf on this as well.
But this is generic MP5 stuff, it's not anything to do with the Iranian version. But I mentioned
numbers on some lowers, so we, we have a one marked in English that is 0, 1, and 30,
the Iranian one, or at least the one we have at least, is marked 0, 1, and 20,
implying that these, contrary to the HK mag that's fitted to this one currently,
these would have been supplied with 20 round magazines, which is interesting in itself,
I think, and perhaps indicative of who these are going to, some sort of security forces,
perhaps more so than infantry, put it that way. Now, rather than having 0, 1, and 20 on both sides,
for some reason we have in Farsi, letters, three letters, and we believe that, well, the top one
is F, or Fe, and then we have T, or Te, and Re, or Ar, forgive my pronunciation of the letters even,
I'm not, I struggle to, I hesitate to even attempt the words, but, so safe, the word for safe we're
unsure of, because we're not sure currently, at time of recording, what letter F could be
associated with a word like safe, or secure, or no bullets, or whatever you want to call it. Hopefully
by the time you see this we will have fixed that. The other two we're more confident of, so we're
looking at Te, or Te, and Ar, or Re, and the T would be, we believe, Taneya, meaning single, or single
shot, and Ar for Rashash, which is common in Arabic as well, it means machine gun, so I think by putting
machine gun on your gun, or the first letter of that, you're implying that it functions like a
machine gun. Of course, in US legal terms, this would be a machine gun. So that's the selector, the two
markings on the right hand side, one on the polymer lower, and one on the steel upper, are the logo of
DIO, Defence, the Defence Industries Organisation, whose name in Farsi is, well the abbreviation is
and I won't attempt the full, several words that that stands for. Then on the other side, we have
three lines, again in Farsi, and that is Ministry of Defence, top line, and then we have that
abbreviation, and then bottom line, Defence Industries, standing for Defence Industries
Organisation, and the remaining marking up on the magwell is the serial number, which on this one
is 73-22304, so if anyone else has an Iranian MP5 out there, see how close yours is to this one.
That is all, or those are all of the markings, and as that is all of the markings, it's worth
mentioning that there are no proof marks, so depending on where you are in the world, proof
marks are either required or not, and clearly they're not required in Iran, because it hasn't
got any, which is proof of course that these are being fully made in country, or were being, and
still are being made, as far as I know, fully in country, not from any kind of kits, or using any
kind of imported parts. If you were licensing production from H&K, you could do it any one of
those three ways, entirely in-house with a technical data package from them, perhaps tooling from them,
with a certain proportion of parts, or even potentially just sort of flat pack assembly,
or even that, although even that requires more in the way of final finishing than you might think.
The handguards of course are different on these two guns, but that's again just a change in H&K
build standard, this is DIO carry on making the early pattern handguard. If you compare it
very closely to a period H&K one, it's made out of a different polymer, and it's a little
rougher in finish, but that's true of the whole gun. Which brings us to me attempting to take
this apart, because there are a few internal parts that might be instructive to show you
as well, one in particular. Now I have tried, I have attempted this earlier, and I actually needed
a drift to get the takedown pins out, which let me show you on the on the Enfield gun,
how easy this is meant to be. Press, pull, off, it comes. If I now attempt the same
on this, hopefully I don't need a drift again, I might have got a bit more leverage on it this time.
Yep, it might partly be that it's very new, this doesn't seem to have seen any significant use,
so maybe just that first time it needed a bit of assistance, I've got it out fine this time,
but I did have to give a little bit of a tap the first time. Now, what remains problematic for me
on this, talk amongst yourselves, is how incredibly tight this thing is on the receiver, we got there
in the end. So, just not a great amount of attention being paid to finish there, that's
the only real difference. Now we do have one noticeable difference I would say, let's get
these parts out of the way, and try not to interchange them. So the bolt carrier group
on the MP5, lots of nice machining, bit of polishing perhaps, and a nice finish. The
Tondar carrier group, it's a little rougher, and there is a bit of machining done there. Now I
don't know, the engineers amongst you might have some theories as to why that's been done, there's
a sort of seemingly redundant piece of metal been machined out of there. I don't know if that's just
to reduce friction, or for some other purpose, but that's not on any of the HKs that I have looked at.
And you'll notice as well, now there are markings on these parts, these are the last three digits of
the serial number, just to keep everything together, and you'll notice that the underside
of the bolt carrier is really really smooth, like worn or ground and then worn smooth I would say,
and rather than the sort of facet that's on the HK, it's just a continuous ramp
on the DIO made gun. So it all does the same job, it's just that we've got some very slight
differences that to me imply maybe slightly rougher manufacture. And interestingly the weld
is more visible on the HK, but it's kind of recessed, even though you can see the weld seam,
it's recessed in there, it's done very neatly without the need to grind it away.
On the Iranian one it's been done proud, not flush, and then ground away. So although it
looks smoother, that's a function of slightly less good welding I would guess. Finish is the
other thing, so I just think it's a higher quality phosphated finish I think, on the
HK buffs, correct me on that if I'm wrong, just looks to be a higher quality finish
than on the Iranian example. That's probably the only standout thing, I mean just everything
about them seems a little bit rougher, I think we can leave it at that. We're still learning
about these things, I'm in contact with some contacts who have encountered these in the wild
as it were, and this is a relatively late style of the DIO logo, and there's an earlier form and
apparently some even have the Lion of the Shah, well the original would in theory have that.
So there are changes within this variant as it were, this national variant.
If you've heard of these things even, you may well have seen them with green, like an olive
drab greenish polymer, more like what's on the Iranian G3s, well it's much more of a brown than
a green, put it that way. That's not the case on this. I wondered at one point if there was a
difference between military law enforcement and civilian production, because they're producing
these for export as well, no I don't think so. I think they just changed at one point from brown
to green, sorry from brown to black, your mileage may vary on that. We have a sample size of one.
Speaking of exports, one customer I know of is Sudan, I think they call it the Tiraga,
they have their own, I guess locally assembled version of this, but substantially manufactured
in Iran. I'm sure they're being exported elsewhere, some turned up in Yemen in the turmoil
over there, so if you keep your eyes peeled you might well see one of these cropping up, or if
not this then one of the other originally licensed, now illicitly produced, Heckler & Koch copies.
Thanks so much for watching guys, as always remember the YouTube things,
like, subscribe if you're not already, we do have a rather exciting exhibition coming up
28th of June, it's Gladiators Heroes of the Colosseum, you won't see many guns but you
will see some cool stuff, that's on for six months. Come and visit us if you can to see that,
otherwise we'll see you here again next week.
