Lecture 60: Revision: Dynamics

IIT Roorkee July 201
61 followers
2 Video Views·Oct 3, 2024
In this final lecture, we revisit the main concepts related to the dynamics of particles and rigid bodies.
Hello everyone.
Welcome to the lecture again.
In this last lecture, we are going to revise the key concept that we have learned in the
dynamics part, that was the second half of this course.
We started the discussion by looking at the Newton equation of motion in different coordinate
system, namely the Cartesian coordinate, the planar polar coordinate, spherical coordinate
and cylindrical coordinate system.
So, in Cartesian coordinate, we have the x, y and z axis and here this u 1, u 2 and u
3 are the x, y and z and the scale parameters h 1, h 2 and h 3, they were 1, 1 and 1 and
the equation of motion of the particle.
So, let us say the particle is at point P and this particle is moving.
So, in this case, we saw that the unit vector does not change, it does not change the direction
as the particle move from one point to other point and the equation of motion was summation
f x equal to m x double dot, summation f y equal to m y double dot and summation f z
equal to m z double dot.
In planar polar coordinate system, we have the r and theta coordinate.
So, the particle moves, so its position vector is r and this r, the angle that it makes is
theta.
So, the unit vector along r is r cap and in the perpendicular direction, we have theta
cap.
So, here our u 1 and u 2 are the axis, they are r and theta and the scale factors h 1
and h 2, they were 1 and r and the equation of motion was summation f r, this is the force
along the r direction that was m r double dot minus r theta dot square and summation
f theta was m r theta double dot plus 2 r dot theta dot.
Now, note that in planar polar coordinate system, when the particle moves from one point
to other point, in that case the unit vector also changes the direction, this was not the
case in the Cartesian coordinate.
Let us now look at the spherical coordinate.
So, in spherical coordinate system, we have the r, theta and phi, so let us say the position
of the particle is p, so that is defined by r, theta and phi, r is this r, theta is the
angle that it makes from the z axis and phi is the angle that its projection on the x
y plane makes from the x axis.
So, here our u 1, u 2 and u 3, they are r, theta and phi and h 1, h 2 and h 3 are 1,
r, r sin theta.
Therefore, the equation of motion along the r direction that is summation f r equal to
m r double dot minus r theta dot square minus r sin square theta phi dot square, summation
f theta equal to m r theta double dot plus 2 r dot theta dot minus r sin theta cos theta
phi dot square and summation f phi equal to m r dot phi dot sin theta plus 2 r theta dot
phi dot cos theta plus r sin theta phi double dot.
In cylindrical coordinate system, we have r, phi and z, let us say this is x axis, y
axis and z axis, then the position of the particle, let us say p is defined by r, phi
and z. So, u 1, u 2 and u 3, they are r, phi and z, where r is the radius of the cylinder,
z is the height of the cylinder and phi is the angle that this r makes from the x axis.
And we saw that h 1, h 2 and h 3, the scale factors were 1, r and 1 and the equation of
motion in the r direction, so summation f r was m r double dot minus r phi dot square,
summation f phi was m r phi double dot plus 2 r dot phi dot and summation f z was m r
z double dot. Then, we looked at the principle of work and
energy and the equation we got by integrating the Newton's law with respect to displacement,
so principle of work and energy. So, we started with f equal to m a equal to m d v by d t,
we integrated this with respect to displacement. So, we have integral f dot d r equal to integral
m d v by d t and then d r, but then d r by d t is nothing but velocity, so we have 1
to 2 f dot d r equal to m v 1 to v 2 v d v. So, we got u 1 2 equal to m by 2 v 2 square
minus v 1 square or u 1 2 equal to t 2 minus t 1 or in natural sequence, we have t 1 plus
u 1 2 equal to t 2. Here, t 1 and t 2 are the kinetic energy,
the initial and the final kinetic energy and u 1 2 is the work done by the external forces.
And if there are elastic members are also present, then it can be written as t 1 plus
v 1 plus u 1 2 equal to t 2 plus v 2. So, here v 1 is the potential energy, which include
the gravitational and elastic potential energy and u 1 2 is the work done by the other forces.
We also look at the impulse momentum equation and the impulse momentum equation, we got
again from the Newton's law by integrating with respect to time.
So, again we have summation f equal to m a, this was d p by d t and we integrated this
with respect to time. So, we got integral summation f d t equal to 1 to 2 d p or t 1
to t 2 f d t equal to p 2 minus p 1 or in natural sequence p 1 plus t 1 to t 2 summation
f d t equal to p 2. So, this equation tells that, if the initial momentum is p 1 and the
linear impulse is this, then the final momentum will be p 2.
Then we studied the impact, let us say I have two rigid bodies, then the tangent to the
contacting surface is this and the common normal to the surface in contact during impact
is the line of impact. So, here in that common normal is this, so therefore, this is the
line of impact, we discuss two cases, one was the direct central impact. So, here in
the velocity of the bodies are directed along the line of impact, so that means, if this
is the line of impact, then the velocities are along it.
Let us say, the velocity of this body is v a, the mass is m a and the velocity of this
body is v b, mass is m b, then for the impact v a has to be larger than v b and after the
impact the velocity of body a is let us say v a prime and the velocity of body b is v
b prime, then the question was what are these velocities. And for that, because there are
two variables, we need two equation and one equation comes from the definition of coefficient
of restitution, so we got E equal to v b prime minus v a prime over v a minus v b.
So, this E was the coefficient of restitution and v b prime minus v a prime is equal to
v b prime is the relative velocity of separation of the bodies and v a minus v b is the relative
velocity of approach. And the conservation of linear momentum for the whole systems gives
us, so this comes from the second equation comes from the conservation of linear momentum
of the system. So, we have m a v a plus m b v b minus v
equal to m a v a prime plus m b v b prime, so we have two equation and two unknown, so
therefore the problem was solved. Then, we look at the oblique central impact, so herein
we have let us say two bodies and the line of impact is this and let us say the velocity
of body a is v a and the velocity of body b is v b, then the question was after the
impact what is the velocity of the bodies. So, let us say this is v b prime, this one
is v a prime and the directions are also involved, so there were four parameters, two for the
velocity and two for the direction. Let us say the direction of the tangent to
the contacting surface is t and the direction of the line of impact is n, in that case we
have in the n direction, we have e equal to v b prime n minus v a prime n over v a n minus
v b n. And we have the conservation of linear momentum for the whole system, so this is
the same case as before m a v a n plus m b v b n equal to m a v a prime n plus m b v
b prime n. And then two equation comes in the t direction,
so we have in t direction since there is no impulse, so therefore the momentum of each
particles remains conserved, so we have m a v a t equal to m a v a prime t and m b v
b t equal to m b v b prime t. So, we have four equations and four unknown, so again
the problem is solved.
Then we discuss the variable mass problem, so here in we consider a system which is either
gaining the mass or losing the mass, to formulate the problem we said well let us say there
is a small mass d m which is moving with a velocity v naught. And we have a bigger mass
let us say it is denoted by m moving with the velocity v, then at time t this is the
initial case and then after they combine together, then we have the mass m plus d m and the velocity
is v plus d v. Then we use the impulse momentum relation
to find out the equation for the variable mass problem and it was m d v by d t equal
to f external plus d m by d t into u rel, where this u rel was v naught minus v or the
velocity of the smaller mass minus the velocity of the bigger mass. Then we look at the moment
of inertia, the moment of inertia of a body is defined as I equal to integral r square
d m and then we look at parallel axis theorem. So, suppose I have a rigid body and we have
axis which is passing through the centre of mass let us say g and let us say this is b
b prime and we want to know what is the moment of inertia of this body about a a prime axis
which is parallel to b b prime and at a distance of d.
Then the moment of inertia I about a a prime is I bar plus m d square, here I bar is the
moment of inertia about the centre of mass axis. So, this is about b b prime and I is
the moment of inertia about a a prime which is an axis which is parallel to b b prime
and at a distance d. Then we discuss the perpendicular axis theorem, we said let us say there is
a body which is in two dimension, let us say in the x y plane and then we want to calculate
the moment of inertia of this body about the z direction. Then the moment of inertia about
z is I x plus I y, then we discuss the moment of inertia of composite bodies, let us say
I want to calculate the moment of inertia of this object about o o prime, then the moment
of inertia of this object will be let us say this is object 1, 2 and 3, then the moment
of inertia about o o prime will be the moment of inertia of the first object plus the moment
of inertia of the second object plus the moment of inertia of the third object.
Mathematically, I can write down as I the moment of inertia of the composite body equal
to the moment of inertia of all sub parts and then sum them together. Herein we have
to note that the moment of inertia of all sub part, it must be calculated with respect
to the same axis here o o prime, then we look at the moment of inertia of the rigid body
about an arbitrary axis. So, let us say I have a rigid body and we have the x y and
the z axis and I want to calculate the moment of inertia about let us say o l, then we saw
that I o l was I x x l square plus I y y m square plus I z z n square minus 2 I x
y l m minus 2 I y z m n minus 2 I z x l n. So, here I x x is the moment of inertia about
the x axis, here in we encounter I x y I y z and I z x, these are the product of inertias.
And the inertia matrix I is defined as I x x I y y I z z, then we have minus I x y minus
I x y minus I x z minus I x z minus I y z minus I y z.
Then we discuss the principle axis of inertia, we saw that if we examine the rigid body and
its moment and product of inertia for all possible orientations, then there is always
an orientation for which the product of inertia vanishes. And in that case I becomes I 1 I
2 I 3 and all the product of inertias are 0. So, here this I 1 I 2 and I 3, these are
called the principle moment of inertia and this x y and z axis for which all the product
of inertia vanishes, they called the principle axis.
We then discuss the plane motion and we saw that a rigid body execute a plane motion,
when all parts of the rigid body they move in a parallel plane. Particularly, we discuss
the general plane motion and this general plane motion is the combination of a translation
and a fixed axis rotation. So, let us say I have a rigid body and let us say there are
two point on the rigid body B and A and this body performs a general plane motion. So,
the general plane motion can be analyzed by considering it as a combination of the translation
of let us say the point B and a fixed axis rotation of point A with respect to B.
The relative velocity of point A will be the velocity of B plus the velocity of point A
with respect to B. Now, since point A is making a fixed axis rotation about point B therefore,
v A B will be omega cross r. And the relative acceleration of point A will be the acceleration
of point B plus the acceleration of point A with respect to B. Now, A A B has two component
the normal component and the tangential component because this is making a fixed axis rotation.
So, we have the n component and the t component. So, therefore, A A will be A B plus A A B
n plus A A B t and the value of the normal acceleration in fixed axis rotation is v square
divide by r or r omega square where r is this distance and A A B t is r omega dot or r alpha.
We then discuss the general equation of motion of the rigid body. Let us say I have a rigid
body and on this rigid body various forces are acting and G is the center of mass. Then
this equation can be analyzed by replacing all the resultant forces at some chosen point.
So, let us say the chosen point is G. So, as if at G all the forces are acting and then
there is a corresponding couple or the moment about the mass center G. And then we can write
down the equation of motion. So, we have translation equation of motion which is summation f equal
to m a bar where a bar is the acceleration of the center of mass and then we have rotation
equation of motion which is summation m g equal to l g dot where l is the angular momentum.
So, because of this we have m a bar and because of m there is l g dot. We then look at the
work energy and impulse momentum relation for the rigid body and we saw that their form
remains the same as they were for the particle. Herein we have the work energy equation as
T 1 plus v 1 plus u 1 2 equal to T 2 plus v 2 and the kinetic energy T 1 is half m v
1 square plus half i omega 1 square because the body has also the rotational energy.
And the impulse momentum equation was l naught 1 plus integral T 1 to T 2 summation m g dot
equal to l naught 2. Here l naught 1 is the initial angular momentum and integral m d
t was the external angular impulse and l naught 2 is the final angular momentum. Finally,
we discuss the Euler's equation of motion. So, we said that suppose I have a rigid body
and capital X, capital Y and capital Z are the fixed frame and small x, y, z are the
rotating frame which are fixed with the body. So, basically they are the body frame and
if this is small x, y, z are also the principle axis of inertia. Then we have the equation
of motion of the rigid bodies as summation m x equal to I x x omega x dot minus I y y
minus I z z omega y omega z summation m y equal to I y y omega y dot minus I z z minus
I x x omega z omega x summation m z equal to I z z omega z dot minus I y y minus I z
z minus I x x minus I y y omega x omega y. Well friends, with this we come to the end
of this particular course on mechanics. I hope that this course was useful to you and
you were able to learn and understand various concepts related to Newtonian mechanics. I
understand that there is always a scope for improvement in teaching and therefore, I look
forward to get valuable feedback from you so that we can make it better with time. Taking
this course under the NPTEL platform was also learning experience for me and I am very grateful
that I got this opportunity. I thank the TA Nikita Choudhury and Deeksha Sharma for helping
me throughout this course. I hope to see you next time probably with a different course
on physics. Thank you.
