Building a BEAUTIFUL Fully Rigid Single-Speed MTB | Flip Bike

RockShades
98 followers
#sport #travel #running #marathon #cycling #bicycle #training #race #triathlon #swim #bike #run #adventure #inspire
I ended up paying $250 cash for this bike, plus I traded some stuff.
And so let's call it $325.
That is a really good deal because it comes with a few things.
First of all, it comes with a very lightly used Cane Creek headset,
probably $120 brand new.
It does, in fact, come with a dropper post and a lever
and a SRAM DUB bottom bracket, which is also in very good working order.
And so this purchase was very easy to justify.
But what got me really excited about it was this feature right over here.
We can adjust the length of the chainstay by a small amount.
Why would somebody want to do that?
All right. I think I mostly have what we need here.
And then the rest of it is right here.
A friend of mine supplied these.
I suspect I'm going to owe him a lot of bike parts to make good on this.
These are 29 inch forge and bond carbon wheels with industry nine hubs.
And as you can see, it comes with an XD driver body.
That's for SRAM cassettes.
But I'm actually not going to put a cassette on this wheel at all.
This bike is going to be a single speed.
This is going to make the bike simple, fun, reliable and completely impractical.
So we've adjusted the chain to as close as we can for this bike.
Now it's easier to understand why this bike has an adjustable dropout.
We can increase the length of the chainstay very slightly
and put perfect tension on the chain and we don't need a derailleur.
So now you might be thinking, great, the chain has perfect tension.
Now what? We've got a bike that you can't really climb with.
And what's worse, it's got gigantic tires.
Why would you put two point eight inch mountain bike tires on a bike
that you can't even climb with?
Well, you haven't seen the fork yet.
A fully rigid fork, not just any fully rigid fork,
a 29 inch suspension adjusted through axle 110 millimeter fork.
So it is used and it is the color silver.
At first, that bothered me, but then I realized it matches
the salsa logo on the downtube.
I think I'm going to use some restraint and leave it and get this bike built.
Salsa is a sister company to Surly.
They make a lot of gravel and bike packing stuff and also frames like this
that can be converted easily to single speed.
There's not much to this bike because it doesn't have a drivetrain.
I just need to run this hydraulic brake hose through the frame.
Of course, I'm using a set of Shimano MT 200s.
They're really inexpensive brakes.
You can get them for about fifty five bucks
and they are extraordinarily reliable and high performance for the price.
This was the original shift cable here.
And so we can use it to sneak the brake hose through the frame.
This build is going really quick because there's no drivetrain.
All we have to do is install a seat, a bottle cage.
I'm going to put clipless pedals on this bike because you want to have a prayer
of being able to pedal uphill.
And then we can bleed the rear brake, make a few final adjustments
and stare at it.
Initial impressions, this thing's geared way too high for climbing,
but I already knew that I used the gears that I had on hand,
which was a 28 tooth chain ring and 18 tooth rear cog with 145 millimeter cranks.
With that said, I didn't have to walk anything on this climb.
I was able to make it work.
But if I did that every day, I would blow out my knees.
And so, yeah, we're going to change the gearing on this.
Now, the other thing I notice is that even on the climb,
the rigid fork took some adjusting.
I have to change my body position.
A lot of us have a tendency to let our shoulders do the shock absorption
because the suspension fork is picking up most of the load.
And I feel even just making it up here.
I'm a better rider for it.
Having said that, it is time to descend.
So I don't know if you knew this,
but suspension is actually designed to keep your wheels on the ground.
It's really, really easy to get air on this for that very reason.
Now, with that said, that's pretty much the only advantage
you get on this going downhill.
There's actually a much bigger difference between a full rigid
and a hardtail than a hardtail and a full suspension.
And that's probably why I know a lot of people who ride single speeds,
but not a whole lot of people who ride full rigid bikes.
That said, I do have a little bit of compliance.
First of all, the tires, these are high volume.
If you happen to know how to calculate the volume of a donut,
you know that going from 2.5 to 2.8 is actually a lot of additional air.
The other place I'm getting compliance is my handlebars.
These are carbon fiber P&W handlebars, and they built a fair bit of upwards
and downwards compliance into the handlebars.
They don't move any other direction and tell you something
was taking this thing out for me.
Despite the fact that this bike is so simple,
you'll notice that I left the dropper post.
I've said in the past I would give up my suspension fork
before I gave up my dropper post, and I'm actually being 100% serious.
That was something I was not willing to take off the bike.
So now that I've ridden the bike, I'm starting to get used to it.
I'm starting to change my body position and look at things in a different way.
That's why you want to have different bikes, is it makes you a better rider
and makes you better able to adapt to different scenarios.
And I'm going to give you a few additional thoughts.
First of all, the bike's about 25 pounds.
That is light for a trail bike, but not for a trail bike
that doesn't have a drivetrain or a suspension fork.
I would say the extra weight is coming from these big, beefy tires
and the not particularly light aluminum alloy frame.
And as I said, it does have a dropper post.
Another thing I noticed, these carbon wheels feel really nice.
And also the valve caps have valve core wrenches in them.
And so that's kind of a cool dual purpose.
Also, I'm very glad that I chose to put clipless pedals on this bike,
because when you're going slow and mashing and trying to get through something.
Yeah, being clipped in is pretty useful.
Also, having thought about the gearing of this bike,
the answer might be to just put longer cranks on it.
I have these five dev 145 millimeter cranks on the bike.
They feel amazing if you have gears and you can spin efficiently.
Single speed, you're almost never spinning efficiently.
And so you just need leverage.
So with all that said, I'm going to keep this bike around for a little bit.
I'm going to optimize it.
I'm going to try and make it as good as possible.
And then I'm going to sell it.
I recognize all the benefits of it.
I recognize how fun it can be.
And I have a lot of respect for people who ride bikes like these.
But I just don't have it like that.
Not for me.
As of today's date, we are still in the middle of the bike apocalypse.
And so new bikes, used bikes, they're all going for next to nothing.
So it's not the time to fix up an old bike and expect to make a profit on it.
But I'm having a lot of fun putting bikes back on the trail.
And this is something we probably would have not normally done on flip bike
because nobody's going to buy that thing.
But still, Salsa Timberjack, super cool bike.
I think to some people, this is the coolest bike in the world.
I had a lot of fun building it.
I had a lot of fun riding it.
And for the foreseeable future, I'm going to be messing around on a little bit.
Also, we have new green Berm Peak jerseys.
These are three quarter sleeve.
It's a little cold out.
And so I have a long sleeve under it.
But you can get these on Cognitive MTB.
Hope you did learn a little bit about why some people ride single speeds
and in fact, full ridges.
I hope you learned something.
If you didn't, I hope you at least found this entertaining.
Thanks for riding with me today and I'll see you next time.
