VQ35 Piston and Rotating Assembly Installation | VQ35 Engine Build Part 1

The Engine Story
7 followers
Oh man, today is a good day, and this has been a long time coming.
Alright, so it's finally happening.
I'm building the VQ35 all the way from the ground up and making this thing into the performer
I really want it to be.
So for those of you who don't know, I'm building this VQ35 to be a really strong and reliable
engine to go into that 1978 Datsun 280Z.
To clarify up front, this is a VQ35DE, and before I see a bunch of comments asking why
I went with a DE instead of an HR, well, the reason is I'm really buying into the VQ35
architecture.
Now I'm buying into the architecture because these things from the factory have a lot of
really good components, but it offers a lot of versatility to make this into a different
type of engine, make it something that's higher revving, a really good performer, and something
that is really going to accommodate that light chassis in the Datsun.
As a result, even buying into this, I knew a lot of the stock components weren't going
to stay, and since none of those components were really going to stay, it didn't make
sense for me to pay more to get an HR.
The DE is a really good foundation, even if you're looking to just get something to run
stock in a Datsun, or really any other engine swap you want to do.
They're incredibly versatile.
They're in a ton of different cars between Nissan and Infiniti, which means parts are
pretty readily available.
That's really good.
That means I can find parts as need be.
I'm not having to go to specific websites to get all kinds of specific fasteners and
things.
These are things I can go to a Nissan dealership and get OEM parts for still, or find a ton
of stuff in the aftermarket.
That's probably the key thing with this build, is knowing the aftermarket, because these
were in so many cars.
Before I start jumping into all the upgraded parts I want to throw in this thing, I want
to talk about all the work that went into getting this to a really good, solid foundation
and a good starting point to actually build from.
Now, from the teardown video, I was taking note of every part that came out of this,
if things were damaged or not.
I did get this engine from a salvaged 350Z that had been wrecked.
Now, when I got it, I did take note of a few things that were damaged, like this front
timing cover had completely cracked and was torn away.
This engine mount had a big crack in it, basically.
Now, I've had that welded up, and the guy who did it, I did make sure that any of the
heat dispersion didn't mess with any of these cooling jackets around the cylinders themselves
and didn't interfere with anything else that may be a problem down the road.
So with this welded up, I bought a new used timing cover, so that will come on here a
bit later.
All of this was kind of fixed from its initial wreck.
So next I wanted to look more into the cylinders, and when I tore this thing down, I didn't
notice any ring ridge on the cylinders, but once I got a dial board indicator into this,
it was pretty clear that the middle of all the cylinders had been more worn than the
top or the bottom.
Now, that's kind of to be expected, considering the life that this had previously, but that
did mean that I was going to need a bore on all these cylinders.
Now, that really wasn't too much of a problem, considering I was planning to go to a forged
piston anyway, but that just meant that when I was ordering pistons, I needed to make sure
I got the overbore to make up that difference.
So what I ended up going with were these Wiseco forged pistons.
Now, these things are really, really nice, and they actually up the compression in this
thing from 8.8 to 1 to 11 to 1.
Now to go with those, I also threw in these Brian Crower connecting rods, and you can
see that these things are a lot more beefy than the stock ones that come in the VQ35.
So after the cylinders were bored and honed, I wanted to also make sure that I had decking
done here on the top to provide a really good foundation and starting point for when I get
to the cylinder heads that will be coming up in the next video.
Now, to tie that piston and rod setup, I'm using ACL race bearings in this whole thing.
Everything from the crank journals to the connecting rods to even the thrust washer
in this.
And to tie all of that together, I'm using ARP fasteners to basically bolt everything
down.
And to go along with all those awesome parts, I'm throwing in a billet aluminum girdle in
this thing, which should definitely help give it some more rigidity, and I'm putting in
a Greddy lower oil pan, which has internal baffles to help with oil starvation.
I do plan on tracking this car pretty hard, and I definitely want to give some insurance
to all these parts to make sure it doesn't go into any type of oil starvation and start
eating itself.
Now, all these parts are pretty readily available in the aftermarket.
I'm getting these from CZ Performance.
I'll leave a link down in the description so you can find all these things if you're
looking to build an engine like this.
But yeah, there's a ton of different options for a VQ35.
This is just the one I want to go with because I think it best fits the car and the type
of drivability I want out of it.
So with that, in this video, I'm going to be throwing in all these really cool parts,
bolting all of this together, and getting it into a really good bottom end.
And then we can look forward to all the other goodies I'm going to bolt into this to make
this thing an absolute mad little monster.
So with that, let's get to it.
Well, this was going to be the part of the video where I show a lot of footage of me
measuring a lot of the crankshafts, showing off a lot of tolerances and the clearances
they're in.
However, I lost all that footage.
So what I want to do instead is walk through and explain what I did, definitely if you're
someone interested in doing something like this.
Basically what I'm going to be doing is a lot of measurements, and really the point
of this is to make sure everything is within the tolerances and the clearances that Nissan
recommends for a VQ35, and to basically make sure that this thing stays healthy when I
start running it.
Now to do all these measurements, I'm really utilizing two tools.
So if you're looking to do this, definitely invest in a dial bore indicator, and really
you should invest in a micrometer, however at the time I was doing this, I was using
digital calipers, really you should be using a micrometer as they're more specific and
more precise with the measurement, I just didn't have those at really my capacity at
this time of build.
So to basically walk through what you're doing, you're basically measuring the journals
on the crankshaft and you're comparing that to the measurement that you get with the bearings
in the block itself, and what you want to account for is the spacing and the clearance
between those two.
Now for those of you who don't know, a crankshaft never really touches these bearings.
Basically a crankshaft is always suspended in these positions by oil that's between
those bearings and the crankshaft journals, and that is what that little bit of tolerance
is that we're measuring for is to make sure that that ability to keep oil in there is
not either too tight or too broad to where this thing can encounter damage.
Now in order to do these measurements, first thing you do is you take a micrometer and
what you're measuring is the main journals on the crankshaft itself.
Now once you get that reading, you lock that measurement in place and then you take your
dial bore indicator and put it in the micrometer and set that to zero.
Now you have a really good reference point for when you take that dial bore indicator
into the block itself when you're measuring the bearings.
Now what you'll be looking for when you start measuring the bearings in the block is whether
your indicator is showing below the measurement, at the measurement, or above the measurement.
Now basically what those things show is, is this measurement going to be too tight or
is it too loose?
And that's really what you want to count for in doing all these measurements themselves.
Now the main journal bearing clearances in a stock VQ35 are between .035mm and .045mm
with an upward limit of .065.
Now these are the measurements that are indicated by Nissan for the VQ35 and these are the measurements
that I'm adhering to when doing this build.
Now if you're also looking to do this for the connecting rods, the same science applies.
You do the same exact steps where first you're taking that micrometer and you're measuring
the connecting rod journals on the crankshaft, locking that measurement into place, and then
bringing your dial bore indicator to it to set it to zero.
What you then do is take your dial bore indicator that is set to zero, take it over to your
connecting rods, which you have mated up with the bearings in them, and then you're doing
your measurement in there to make sure you're within those tolerances.
Now the stock VQ35 clearances for the connecting rods are between .039mm and .059mm with an
upward limit at .070mm.
Now one of the things I should indicate here specific to my build was when I was first
doing this, I took both my crankshaft and the block itself to have machining done.
And when I took the crankshaft, I asked for them to do really two things.
First of which was to make sure that I had a polish done on all of the journals to get
this thing back to a factory condition like new so I could start this build.
The other thing I indicated was for them to check all of the journals for something that's
called out of round.
Now what that means is they go in with a dial bore indicator and basically just check to
make sure that all of the journals are really adequately round all the way and don't have
any high or low spots.
Now this is something you can do at home, again with a dial bore indicator, but what
you want to make sure and to account for is that at no point in the previous life of this
engine or the crankshaft that there were any wear spots on the crankshaft journals.
So basically what they measured for was to make sure that there were no high spots or
low spots where wear was potential.
Because one thing I don't want is for one of those low spots to encounter some type
of resistance on the bearing, either wearing it out or run the potential to spin a bearing
when this is running.
So there are some other things to account for.
I definitely think it's worth the money to take these parts to a machine shop, have an
expert overlook a lot of this, but a lot of these other things as far as measurements
and checking for tolerances you can do at home with a few specialty tools.
One more thing before I forget and how I did all of this, but once I actually had the crankshaft
in the block on the bearings and put the journals in locking everything down, I had
also used PlastiGage to sort of double check all my measurements and actually get a real
time sort of measurement of what the actual bearing to the crankshaft journal and what
those clearances actually look like.
Now I know that some people do have stipulation about using PlastiGage, but in my case I was
using it sort of as a second way of measuring all of these tolerances since I could do it
mechanically with the dial bore indicator and actually measuring them out for what they
were.
This provided a real window in time for what they actually looked like once they were mating
together.
Now as you can see from this footage that did manage to survive, the measurement shows
the tolerances is right between the specs, being between this .038 and the .051, which
is very, very close between the .035 and the .045 spec that we have from Nissan.
So overall I'm really happy to see that all of this falls within the specs that Nissan
recommends.
It looks like everything should line up and bolt up just well, but I did want to actually
show the kind of double checking maneuvers and steps that I was doing with all of this.
So with this little side road step of explaining all of this, I'll get back to a bunch of the
footage.
All right, so that completely wraps up basically the rotating assembly and the first part of
this bottom end on this VQ35.
Now I'm going to go ahead and cut this video here, otherwise this stuff is going to be
way too long, I think, to be consumed in one video, but I am going to do a part two with
this where we start bolting on like the upper oil pan, a whole bunch of new accessories
for this thing, and a lot more speed parts to help this thing really go.
So definitely stay tuned for a part two to all of this where I actually finish up the
whole bottom end.
Like I said, I still got plans for all of the head work I want to do in this thing,
between cams, cylinder head work, eventually intake, but this thing is going to really
come together and be, like I said, an absolute little monster.
So thank you all so much for watching, and definitely stay tuned for what's coming up
with this thing.
But until then, I'll see you in the next video.
