Lecture 03 : Classification of Metallurgical and Electronic Wastes - Part 2

IIT Kanpur July 201
20 followers
Sep 13, 2024
Greetings.
So, this is the third lecture and we will be continuing on our discussion that we had
on classification of metallurgical and electronic wastes.
So, in the previous lecture we were discussing what happens when we get a stream of electronic
waste on let us say a conveyor belt.
So, what we have maintained is that we must device methods for categorizing, classification
and sorting of waste so that the basic idea of economic worth of the waste is identified
and we are able to put some numbers on the electronic waste.
Say for instance we have X amount of gold or silver or platinum or palladium or at the
same time what are the, what is the concentration of hazardous metals, what are the polymers
that are present that are hazardous to humans and flora and fauna and environment in general.
So, continuing on that today we will be focusing on the metallurgical wastes.
So, again importance of classification of wastes, investment on material characterization
and valorization.
This is very important one has to think on the characterization and putting some sort
of value on the waste and this actually leads to the sorting and categorization which gives
us some sort of economic value.
This I have just mentioned and what are the environmental benefits.
So, not only are we just thinking of reducing pollution we are also trying to do some benefit
while we think of developing a good recycling process.
So, apart from our economic benefit if we can think of environmental benefits as well
it would be a two-way win.
So, what happens if we are not doing it?
So, when we are not thinking of categorizing and classifying the waste we will be thinking
of basically reducing material recovery.
The overall material recovery will drop down and on the other hand we will be focusing
on large amount of material will be lost.
So, the loss that we are experiencing because of not sorting wastes will be enormous because
it will get coupled one after the other.
High energy consumption for low metal or material recovery.
What does that mean?
We have actually discussed this to some extent in the previous lecture.
What it means is supposing that we have a block of waste and it could be of a given
category say for instance if since we had discussed electronic waste we could think
of going into a PCB that we had seen.
So, when we look at PCBs if we are if we do not identify the wastes that are the identification
of valuable materials in the waste printed circuit boards we may not be able to devise
proper material recovery.
That will be very difficult if this PCB or such PCBs are not sorted and they are not
categorized and they are not characterized.
So, identification of valuable material in a given stream is of immense importance and
same goes on with the metallurgical wastes as well.
What are the metallurgical wastes and how can we really classify them?
So, there are numerous methods by which we can really classify metallurgical wastes.
One of these methods is basically thinking of the primary route in which these wastes
are generated.
Say for instance there are three primary methods of making metals and these could be
pyrometallurgical route, hydrometallurgical route and electrometallurgical route and these
processes have their own wastes.
These wastes are generated at different processes and of course classification of wastes can
be done on the basis of the origin where the process origin not just the unit process but
the overall process in which these wastes were generated.
Now say for instance if we look at pyrometallurgical route we will see we will have blast furnace
slags.
We have BOF basic oxygen furnace slags.
We have flue dusts.
So of course these wastes are generated at different locations in let's say steel making,
iron making industries but these can be categorized into the pyrometallurgical wastes.
Similarly when we think of hydrometallurgical wastes we can say it could be having spent
leach liquor.
So after the extraction of metal from the leach liquor which was used in hydrometallurgical
system we are left with spent leach liquor.
These types of leach liquor solutions still have some amount of ionic concentrations,
cationic, anionic which could be used for different applications.
Similarly the residual solids which are basically left behind after leaching can be used in
different applications based upon characterization.
So we will think of characterization I will just write here characterization of wastes
methods for alternative recycling.
So when we are able to identify and characterize these wastes we will be able to develop alternative
routes of reusing these wastes and bringing them back to the material cycle.
So the complexity of metallurgical wastes would depend upon what happened during the
process and what is the current composition of these wastes.
Similarly when we look at electrometallurgical wastes we can have spent electrodes, we can
have electrolytes of course these electrolytes have been used for metal extraction, we will
have pot linings.
So for instance if we have a cell what happens after the recovery of a given metal, what
happens to the pot lining, it is also ending up as a waste stream.
Similarly when we look at various other categories of wastes and these can be clubbed into the
conventional routes as well as these can be classified as different categories.
So we will have refractories, drosses, red mud, red mud is one of the most important
wastes that is classified in metallurgical engineering wastes and lot of effort has been
and is being put to recycle the huge quantity of red mud that is generated in aluminum industries.
So these are again the categories of metallurgical waste and this classification is done on the
basis of where these wastes were generated.
Of course one can think of classifying the wastes on the basis of principle element that
is present in a given waste.
So for instance one can think of wastes that are rich in aluminum or iron or copper or
nickel and then classify the wastes accordingly and of course these types of classifications
are also available.
So for this example I have just put the metallurgical wastes on the basis of the origin, the primary
process origin where these wastes are generated.
Now when you think of fixed composition of streamlined wastes, what does that even mean?
Fixed composition of streamlined wastes, normally when we think of a waste attaining of fixed
composition is very difficult.
Say for instance if we look at slags, when we look at slags, we look at flue dusts, we
can have a wide variety of composition fluctuation in these metallurgical wastes.
But if we look at a fixed category of waste, then adjusting the range of composition in
a given category becomes relatively easier.
Of course it still depends upon the process parameters or during which these wastes were
generated.
But when we think of just one category of waste, adjusting the composition and devising
the composition range becomes relatively easier.
So in that sense having a fixed composition range, there could be just range of streamlined.
Streamlined means one does not really have to categorize different wastes that are piled
up at let us say a dump yard or a landfill near an industry, that should not be.
If we are looking at let us say slags, then it should be that a given category of waste
could be collected at one place.
If we have multiple types of wastes coming together, then it is not streamlined.
And again, valorization, putting numbers, putting economical values behind such wastes
is very difficult.
So having fixed composition range of streamlined wastes improves the benefits, improves the
recycling process.
This can be done when we have better methods of collection.
So in this class and the previous lecture that we had seen, we have focused heavily
on devising and prioritizing methods of collection and sorting and classification.
This is very important because if we are able to properly collect and sort and classify
these wastes, the economic worth of each waste stream can be identified very easily.
Organize comminution and waste management.
What do you mean by comminution?
Comminution which is basically just bringing down the particle size and having some sort
of mechanical, physical pretreatment done on the waste streams so that valuable materials
can be concentrated and the materials that are not of much economical worth can be separated
or materials that are hazardous can be separated.
It is very important that when we look at a given waste stream, we devise methods of
proper pretreatment which involves comminution.
And it means basically reducing the particle size so that the further operations, the operations
that follow are benefited.
So for instance, it is lot more challenging when we think of a process that is looking
at larger particles versus smaller particles.
The exposure of, the surface area exposure of smaller particles is higher as compared
to larger particles due to specific surface area being higher in smaller particles.
So what happens is, say for instance if we have smaller particles and we would like to
expose them to a given gas environment, the tentative reactions that we are imagining
for smaller particles, it would be higher, the rate of reaction would be higher as compared
to that of the larger particles.
And this only, this change in observation is because of the different surface areas
of the particles that we have used.
And of course it basically helps us in benefiting the overall recovery of valuable materials.
So organized comminution and waste management.
Again waste management is basically assuming that we are taking care of complete recycling
process.
Now we will focus on what we had written here.
Characterization of wastes describes methods for alternative recycling.
So we have seen some examples of metallurgical wastes here.
We see that it is essential to note what phases are present in these wastes.
So we will just write quantitative, qualitative, qualitative and quantitative, qualitative
and quantitative analysis, analysis of these wastes so that we understand what are the
phases present in them, which phases are we really interested in and what are the elements
that are hazardous and how we are able to extract these hazardous materials, keep them
out of the main recycling route and deal with them separately and then come back to the
original stream and extract the valuable materials.
So a tentative route could be and of course for every waste one has to think and rethink
and redevelop this whole recycling process again.
So and of course after we have sorted, so we will have, we will just begin the phase
identification, reduction of hazardous phases followed by recovery of valuable phases.
So now that we know that the primary target of material characterization would be the
reduction of hazardous phases and the recovery of valuable phases, we can really go ahead
and do the back calculation that what could be the routes of recycling for each of these
wastes given in these major classification of metallurgical wastes.
So let us just do a small experiment.
Here we see the land resources and I have drawn two straight lines representing land
resources that we have.
One of them does not have a landfill on it.
So of course we have drawn it with green.
So it signifies that the land in let us say part A and part B, part A looks free from
any hazardous materials.
So and this is because we do not have a landfill on it.
So of course no landfilling.
The flora and fauna, the environment that is close to such exposed land, it does not
experience much change as compared to a case B where we see that there is a landfill.
And this landfill could have, right now I am just not categorizing what type of landfill
it is.
So it can have electronic waste, it can have metallurgical waste or it can have a combination
of both, combination of multiple, not just both, multiple wastes.
What does it normally do?
Say suppose that this landfill is sitting on this piece of land for let us say a duration
of months.
What gradually happens is, suppose that there is mercury, there is lead and then of course
there are other elements and hazardous materials, CFCs and other materials that are somehow
accumulated in this landfill.
What happens is these wastes may percolate and disturb the land by changing the soil
pH, by affecting the groundwater.
The groundwater contamination is also possible which will affect the flora and fauna that
is close, that is in vicinity to these wastes, these landfills.
And gradually it will happen that this landfill, this land may lose the potential to grow crops
or even common grass.
So again it is affecting the vegetation, it is affecting the water resources and gradually
it will start affecting the human population in vicinity of these landfills.
And of course we right now are assuming that these landfills are open to atmosphere which
means rainfall is also experienced on these landfills which will again help in the dissemination
of hazardous materials on to the land resources that are not even having landfills.
So gradually it will start distributing.
This is very big a challenge for material recyclers to develop good methods to take
care of these types of wastes.
Now when we look at sorting and classification of wastes, one really can think of feed, feed
as in what type of starting material we had.
So we can have raw materials and we can have scraps.
So one way would have been to think of hand sorting it.
So suppose we had the electronic wastes, we could think of hand sorting them but of course
metallurgical wastes are hazardous to deal with.
So hand sorting would be a bit more difficult.
In such cases we could directly have size reduction.
So again this part is coming in comminution and we will be looking at it in the upcoming
lectures as well.
Separation by properties.
So when we have reduced the particle size, be it of e-waste or metallurgical waste, we
can think of separation on the basis of various properties.
So for instance what could be the size of the feed stream after the pretreatment that
we have done?
What is the density of the material?
Is the material magnetic or non-magnetic?
So based on that we can have this classification and how does the material behave in the presence
of electricity and or any other property on the basis of which we can classify these wastes.
So sorting and classification of materials does not stop at just identifying and characterizing
wastes.
It can go beyond that and based on various properties that we have, we can think of developing
various categories of wastes for both e-waste, electronic waste and metallurgical wastes.
We will continue after this.
Thank you.
