Lecture 23 : Zinc dust recycling

IIT Kanpur July 201
20 followers
Sep 13, 2024
Greetings, I welcome you all to the next lecture of this course. We will now be discussing
on zinc dust. So, in the previous classes, we have gone through lot many waste streams
that are associated to zinc. And now, we will be focusing on zinc dust and we will be continuing
this discussion in this class as well as we will be continuing it to some extent in the
next one as well. It is important to note how really zinc dust is formed and we will
be discussing some of the chemical compositions and how we are recycling it.
So, let us just start. We know that one of the most important ways of utilization of
zinc is basically in the area of galvanization. So, it is a crucial waste that is generated
in the steel making unit. Actually, it is generated in the steel making process. So,
one might want to argue whether this waste really is a part of the zinc stream or the
steel stream. So, since it is having significant quantity of zinc, we can consider it as a
waste stream of zinc because it is rich in zinc. The other way of looking at it is since
it is generated in the steel making unit, you could call it as a steel dust E A F dust.
So, that is also one way of looking at it. Which is the way we would like to describe
it is totally depending upon how we would perceive it. If we are looking at it from
composition point of view, then of course, we should go for considering it as a zinc
dust. So, it is generated in steel making industries and this E A F dust or zinc dust
E A F dust some might want to say or the other common way of calling it as zinc dust is really
rich in zinc. What normally happens is nearly about 10 to 20 kg per ton of dust is generated
per ton of steel is generated. We will see how much it really contains E A F dust is
basically generated when we have splashing thin film splashing in the in the processing
right during E A F operation. So, when hot film hot metal is getting splashed and this
thin film splashing is happening the fine dusts that are generated actually end up as
this thin film splashing is actually resulting in small size of the dust particles. Because
the larger particles will never end up in the dust they will recede back into the hot
metal. It is the final fine thin film particles that are actually removed because of the air
flow convection not the larger particles. There are the larger particles would really
re get reintroduced back into the molten metal part. So, this is the generation of the E
A F dust.
We will now look at the chemical composition actually for that we will just draw a table
and we must note that there are various categories of dust the high zinc dust high zinc medium
zinc and low zinc dust. The chemical compositions are as such we will have types and elements
of dust we have elements of course, zinc iron some palladium chromium aluminum and calcium.
Of course, these are and references are general references like this high zinc high zinc is
nearly 20 percent and above medium zinc is nearly 12 to 20 percent. Then there is low
zinc which is lower than 12 percent zinc. So, we know that this broad classification
is going to be with us. So, we can assume that this breakup of the zinc dust is going
to be according to these broad classifications. So, we will just have the internal divisions
done.
So, high zinc we can have 22.26.66, 16.93, 2.71, 0.12, 0.59, 30.5, 27.6, 0.37, 0.12,
0.43, 2.1. Similarly, we have 51.6. So, we can have a really large value here 51.6, 5,
8.8, 2.0. So, now we are looking at the medium zinc bracket it can have 19.4, 24.6, 4.5,
0.3 and the lower zinc bracket the low zinc we can have as well as 5.2, 6.5, 19.37, 8,
1.4, 1.8, 10.9, 10.9. So, we see that the breakup of zinc is really
varying with the type of category that we are looking at and the compositions of iron
and zinc are the most important in these types of dusts and apart from that we have
other elements chromium, aluminum, calcium and other lot more other trace elements are
can also be present depending on what is the composition of the raw material that was used
in the EAF itself. So, what is being used in EAF will be coming
out as dust. So, apart from zinc and iron itself all these elements can be coming up
with that with the dust and these are getting showed these are getting observed in the EAF
dust when we are characterizing it. So, let us just mention some of the important references
Now, when we know that these raw materials are fluctuating based on their composition
we can think of devising good strategies for efficient utilization of zinc from these dusts.
Now, we know that these dusts are very fine in size. So, one has to really think of how
to utilize fine zinc dusts for as a raw material for their process. So, let us just look at
some of the recycling ways and before that we would also like to have a question why
recycle zinc dust. So, we know the obvious answer that should
come to mind is hazardous elements are present. Hazardous elements are present let us say
lead, tin, iron, chromium. Hazardous of course, iron may not be considered as hazardous, but
of course, the other elements that could be present at times we can have mercury and cadmium
also. So, these types of elements when are present we can make the zinc dust hazardous
and these are detrimental to health and of course, one should be vary about how it affects
the environment also and we know that significant quantity is generated. In the production of
steel it is a significant quantity that is generated per ton. So, one can think of reusing
these wastes as a raw material. Now, how do we recycle it? Recycling one of the ways is
rotary hearth furnace rotary hearth furnace operation. What it does is basically E A F
dust E A F dust or rather you could say zinc dust is added with flux. So, flux material
is added and you need coal because it is a furnace and we can easily guess this is
a pyrometallurgical operation. We are going to have flux with dust with coal, coal acting
as the as the agent for combustion and it is going to give us some valuable materials
that is very easy to guess right at the beginning. What exactly happens is we will do mixing
and we will go for pelletization because we know that the size of zinc dust is very small.
So, one has to go for agglomeration process. This is mixing and this is agglomeration and
after that we will have the rotary hearth furnace and the operation is going to give
us D R I H B I or briqueted iron or you could say molten metal. At the same time we have
waste heat generation from where waste heat generation and collection is basically helps
us in extraction of the zinc and other volatile materials zinc and other materials are separated
in this process. So, what it normally does is we take the hearth we add the feed after
of course, pelletization and it gives us the metal and this process is actually targeting
iron the waste product in the form of zinc is getting extracted in the gas phase.
So, let us look at the second route we have electric smelting reduction furnace E S R
F electric smelting reduction furnace. So, here again we are feeding it we have the E
S R F and it is going to give us metal and slag the normal operation of a common furnace
what normally we should also be expecting is the combustion chamber that is attached
to it and gas cooling. This is an important step this step actually helps us in extraction
of zinc and this gives us pack filter. These operations that are after E S R F of
course, we are getting metal and slag which is targeting iron and the iron related product
what we are getting beyond that is where we are where we should be looking at the zinc
output. So, here we are getting gas cooling and back filter give us Z N O extraction Z
N O after one should mind after E S R F operation this is very important because one might just
expect we can just directly feed the raw material and get zinc it is done only after the E S
R F E S R F gives us metal and slag, but the gas that is getting collected is actually
processed elsewhere and there you are getting zinc oxide and of course, we are still not
getting zinc we are getting zinc oxide. So, one has to process zinc oxide and then
get metal the third route would be roasting for development of products. So, another pyrometallurgical
route of handling what we can see here is we have E A F dust E A F zinc dust and we
add F 2 O 3 F E 2 O 3 we go for ball milling and briqueting.
We have vacuum drying and then we can have roasting, roasting is done at a higher temperature
of course, and we can have leaching. Now, this is this part till this part we can consider
that it is pyrometallurgical till this part, but now we are also introducing hydrometallurgy
which can of course, give us nano bead milling of the finished products. So, nano bead milling
followed by zinc ferrite. So, what really zinc ferrite looks like zinc Z N X F E 3 X
3 minus X and O 4 zinc is getting attached to the F E 3 O 4 and what how it is getting
how does it really happen it is it is followed after leaching and you are doing milling one
more time after that. So, what these types of raw materials can be used for making zinc
rich products that are of course, attached to the iron component. So, one has to add
F E 2 O 3 to zinc dust and then you can make these types of products.
The other important alternatives for using zinc dust are basically hydrometallurgical
let us say leaching, leaching with iron powder addition and of course, iron powder is used
as an additive here it is not used of course, it is not used as a reagent one should really
mind what we are adding when and what is it is purpose. So, we can have zinc dust and
of course, zinc dust is coming from various sources not just steel making. So, one of
the key areas where zinc dust can originate from is also from brass smelters from lead
zinc smelter also. So, if we have zinc dust coming from lead
zinc smelter and such a smelter product is added with iron it becomes a raw material
this raw material we could be using as a feed for let us say leaching with H 2 S O 4 and
of course, we are going for ultrasonic leaching. What we can get is we go for the characterization
of finished products and we know that apart from the zinc leaching itself zinc leaching
from the zinc dust and addition of iron it can also give us germanium recovery. So, of
course, zinc is getting leached in the process, but germanium recovery is also reported by
using such processes when we are having different types of waste streams we can have different
types of finished products as well germanium recovery from zinc oxide. One more process
would be reduction roasting and leaching. So, we note that most of the processes really
have to be connected to pyrometallurgy and some parts of hydrometallurgy can be brought
in. So, if we have high zinc dust it could be simply leached with water and this is to
remove dissolvable parts only and use solid residue for reduction roasting. So, we have
nearly 50 percent hydrogen at around 700 degree Celsius that type of operation can be done
and of course, this has to be followed by leaching with acids. This is done and then
we can have leach liquor and solid residue. Again one can use these types of raw materials
for these types of products for making various types of raw materials.
What this really means is you can have a wide range of applications connected one after
the other such that your raw materials are used properly. So, in this case it is zinc
dust we have seen that most of the processes are involving pyrometallurgy, but apart from
that if we are still involving if we wish to involve a hydro hydrometallurgical operation
we can have parts of pyrometallurgy and hydrometallurgy coming into play combined one after the other
and this can give us wide range of valuable materials. We will be continuing in the next
class. Thank you.
