Lecture 24 : Zinc dust and zinc scrap recycling

IIT Kanpur July 201
20 followers
Sep 14, 2024
Greetings, I welcome you all to the next lecture of this course. We will be continuing on zinc
dust that we had discussed in the previous class. And we know that zinc dust has been
an important waste that is containing zinc, it can have good amount of iron and zinc in
it and of course, there are the other elements that are coming into picture. And we have
seen that apart from various types of wastes that are produced in different streams of
production, it is important to note that zinc dust is a draw material for lot many
valuable products. So, and we have also seen different types of processing routes, pyrometallurgical
completely or pyro hydro combined or some other routes that involve briqueting or agglomeration,
which are basically the unit operations involved in handling the E A F dust, the zinc dust.
Now, one of the most important ways by which we can have the extraction of iron and zinc
from E A F dust is the rotary kiln process, the wales process. This process is supposedly
one of the most important process that can help in recovering zinc from the E A F dust,
the zinc dust. So, let us just focus on the wales process, the rotary kiln process of
extraction of zinc from E A F dust. So, as you just noted major portion of E A
F dust or rather we can have zinc dust as processed through rotary kiln process, the
R K process, rotary kiln, wales process or we can also have wales kiln process, most
widely used. What is the dimension? We can have 50 meter long that is a very long kiln
with a diameter of 3 to 4 meters and has mechanism of rotation operation. And the R P M that
can be present is around 0.5 to 1.6 R P M. So, we have 50 meter long diameter is 3 to
4 meters and we and the kiln itself rotates. So, this long and huge kiln is used for zinc
dust, E A F dust processing. Now, what it really does is basically it consumes the E
A F feed with the carbon source and the carbon source is coal. The carbon source is coal
used for the combustion operation and how really does this process go on? It goes in
various steps. We will discuss the steps one after the other. Step 1, moist material
sent to the kiln and of course, one more point is important to note that it takes around
4 to 6 hours of operation. So, once we feed it we will have to sit for around 4 to 6 hours
for the finished product. So, we have the moist material feeding, then we have reduction
and of course, we note that the carbon source is also fed inside. So, reduction is done
at 1100 to 1200 degree Celsius and what we get here is metal oxide start to reduce.
Now, high vapour pressure, high vapour pressure zinc other alkali, alkali metals are involved.
High vapour pressure metals due to their volatile nature. So, what really happens here is when
we are having the reduction operation, we have the oxide formation and its reduction
and when that happens the zinc and other alkali metals are removed due to their volatile nature.
So, these are getting collected into the gas phase. What happens after that? So, we can
have step d, separation when this part is done we can have separation, separation of
vales oxide. This vales oxide and is basically the slag and the other gases. These vales
oxide is important for material balancing. So, we can have some amount of zinc getting
entrapped in the oxide phase as well. Of course, most of the zinc is getting removed, but the
oxide is also getting generated and that can be used as a raw material for other processes.
The slag is discharged, slag is discharged by deslagging and finally, we have separation
of phases. Now, this itself is a very complicated process. So, not just the kiln, it is the
gas phase that is also very important and the gas phase is going to give us zinc. So,
EAF dust, zinc dust being processed in rotary kiln will give us vales oxide that is a solid
product. Of course, it is the solid product that will be obtained after this slag is removed,
but the gaseous products that are generated in the rotary kiln have to be collected for metal
recovery and dust recovery. So, although we are processing a dust, it generates a secondary dust,
secondary bag house dust which could be used for other metal recovery that is what we are
trying to understand here. So, we have coarser particles. Step a of separation of gas phases,
we have coarse particles are removed. These coarse particles are removed by mechanical means. So,
one has to catch these coarser particles and again these are used as raw materials for reuse as raw
materials back in the you know. So, it means that we can see imagine that this raw material is going
to be reused here. Of course, one could think that this is just a circular application, but
that is how it is being reutilized and material is not some not discarded. The second way,
the second step is the dusty catch, dusty gas is cleaned by precipitator. So, this helps in
removal of the dusts that are present in it and finally, dust free gas is used for recovery of
mercury, cadmium etcetera. So, we have different types of routes in the gas cleaning stage as well.
So, that we are able to extract zinc and other metals from it and we are able to process every
step efficiently and take care of the materials that are generated in the process in the rotary
kiln operation. We will now continue our discussion on zinc scraps. So, we have till now discussed
various types of zinc wastes, we have discussed zinc draws, zinc dust and now we will be focusing
on the last aspect of this course for that is pertaining to zinc that is and it is zinc scrap.
So, let us now focus on the next aspect which is zinc scrap. So, we already know that zinc has wide
range of applications in various fields. So, it is expected that zinc that is in service will
eventually come back after its use back for recycling in the form of scrap. Now, one has
to really understand what is the source of the scrap for understanding what could be extracted
from it and the source of scrap is basically the area in which zinc is being applied.
So, let us now have a quick recap of what zinc is used in, what are the areas in which zinc is
used and what are the potential areas of scraps where we can extract our zinc from. So, one has
to think of applications of zinc, applications of zinc. Why is this important? Because this
helps us in understanding the raw material which is basically the scrap for zinc recovery. So,
the different categories of applications are of course, the chief one is hot dip galvanization.
We already discussed that hot dip galvanization, zinc ash formation is happening here. We have
alloying of brasses, alloyings and production of brass and bronze and of course, other zinc
alloys as well. So, we have die casting alloys as well, rolled alloys, zinc based chemicals
and rolled metals and so many other areas in which it is produced. Now, we can also
have some important applications that important alloys that are in service. So, let us just
put some of the examples rolled zinc alloys and we have die cast. So, for rolled we can
have these are the specifications of the rolled alloys and similarly, die cast would be. So,
these are the various alloys that are normally produced using zinc as one of the main constituents
and we know that these applications are using zinc. So, eventually we will get scraps from
these sources only. The finished product of these applications are going to be used in
different areas and after these products reach their end of life these will be discarded
which will bring us the raw material for scrap utilization.
Now, the categories of scraps, we will discuss some categories of scraps and this is very
interesting because the scraps are important feed, but one has to categorize them before
we are directly we are if before we even plan to use them categorized scrap are easier to
use. So, construction and demolition that is one area end of life EOL is basically end
of life vehicles. So, one could also say ELVs waste electrical electric and electronic equipment
which we already know as V or at times it can be also considered as E waste which is
an of course, an important part of what we are going to discuss in the upcoming lectures
and industrial electric waste IEW industrial non electric waste is basically INEW.
So, these are some important categories that are present and of course, one of the most
important category that we have not written yet is municipal solid waste MSW. So, when
we have this categories of scraps we know that these are the potential areas from which
we can easily extract zinc from of course, one has to really categorize the scrap when
we are processing them, but we have identified the broad categories and then it becomes a
lot easier to process these scraps. Now, we will have further discussion on how to process
them one of the most common methods the most common method of reusing the scrap is the
remelting. Now, what exactly are we doing with the remelting is what we are trying to
figure out it is dependent on what is the feed because at times we would be requiring
refining as well we will see how. So, we will make a small table source of scrap zinc recovery
operations and we will just put if you have bronze brass bronze we go for remelting we
have zinc alloys. So, we can go for remelting we have galvanization products. So, here we
can have new scrap or old scrap in such a case new scrap goes for remelting old scrap
goes for remelting rolled zinc remelting and we have others which may not be categorized
in either of them if we if that is new scrap that goes for remelting if it is old scrap
it goes for refining. And we have discussed previously in the in
different scraps of aluminum and copper what really new scrap and old scrap is new scrap
is used directly within the processing unit it is generated in the processing unit it
is reused in the processing unit it is not really reaching the consumers when it is reaching
the consumer of course, it is going to get used the finished product that is reaching
the consumer is going to get used and when it is getting used it will reach it is end
of life and then return in that case it becomes old scrap.
New scrap is generated within the processing units itself and they are consumed by the
processing unit. So, it is important to note that the generation of scraps can happen in
the unit itself and that is why we have old scraps and new scraps and remelting operations
and it is important to note that apart from of course, we know that remelting is the most
important route apart from that the presence of trace elements or contaminants in the old
scrap at times the presence of the trace elements in contaminants in the old scraps
at times make it important to refine the scraps. So, that these trace elements are removed
and then we are able to extract zinc as per our requirement make it necessary makes it
necessary to refine which is why refining is also included.
Now, let us just focus on recovery of zinc from galvanized products. So, of course, one
way of using this galvanized product is just subjecting it as a scrap, but then the zinc
would be lost. So, one can go of these of a process called desinking. Now, desinking
can be done through hydrometallurgical route. Let us just look at it recovery of zinc from
galvanized products and of course, it is a hydrometallurgical route and acidic also as
well as alkaline both routes are available acid dissolution. We have finally, acid with
zinc and by being what do you mean by with zinc basically it is dissolved in zinc and
it can lead to zinc salts. Similarly, when we look at alkaline routes
we have alkaline alkali dissolution alkali with zinc and this can lead to zinc products.
Here is a generalized route we have acid dissolution we have of course, we fed the galvanized product
into the acid bath and we get acid with zinc. This acid leads to the generation of zinc
salts and similarly, we have the alkali dissolution again we fed the galvanized product we get
alkali with zinc. The zinc is getting leached into the alkali and then we are finally, getting
zinc products after it is getting you know removed and processed. In both the cases what
we also are getting here in both the cases we are also getting dezincified. So, this
is important dezincified which was the original target many a times it is this dezincified
products that is what people are targeting, but at the same time it is important to note
that the alkali and the acids are going to give us zinc rich products also. So, one can
think of both ways of extraction of zinc from acids and alkalis as well as dezinc product.
Now, the generalized view of zinc recovery has to be noted we have seen so many different
types of zinc wastes and zinc scrap is also a good source of zinc. So, let us just now
try to put a generalized overview of how zinc products are available in society and how
zinc products should be recycled. So, let us just quick overview of how it flows how
material flows we have the mining operation we have zinc production primary goods we have
secondary goods we have stock of E O L products which is basically the waste stream and scraps
and of course, this is the scrap recycling and we have enrichment which is basically
the wales process that we had seen just now we have mining it gives us zinc production
and then we have primary goods and of course, it can some of the processes can go back some
of the waste products can go back and then return as primary products and when it is
getting forward we can have primary goods getting converted into secondary goods these
secondary goods lead to the end of life products which are getting stocked and collected and
then finally, we have the scrap recycling we know that most common method is refining
and remelting and refining and we also know that at times it can lead to the at times
there is a E F dust and we have the wales process accompanying the recycling process
to give us finally, zinc rich products which are brought back to the zinc production main
operation of zinc production. Now, at there are some internal cycles also
which are very important. So, we have this is new scrap and which is getting from the
primary goods to the scrap recycling. So, it gets directly reused and we can have scrap
recycling is going to primary goods. So, it is directly used directly use of scraps and
this is also going into the scrap. So, this is also new scrap please mind that secondary
goods and primary goods have not really reached the consumer. So, when we are actually producing
and sending it only after that we get the conventional idea of scraps which is basically
the stocks of E O L that is product products. We have already seen what type of products
are present here the V based electrical and electrical electronic equipment and. So, many
different waste streams that we have discussed previously those are the stocks where zinc
could be produced consumer products those are the areas where the scraps are produced
are coming from, but primary goods and the secondary goods are producing the new scraps
only. Now, what are the secondary goods after all
let us just jot them down quickly construction applications we have transportation we have
industrial applications similarly health health care products consumer goods and other miscellaneous
applications. So, these are the products that are about to reach and after of course, you
should write end of life it is getting stacked and after the stacking it gets recycled. Now,
one should note that this type of cycle that has been made for let us say this is specific
for zinc this can be made for copper this can be made for aluminum this can be made
for steel this can be made for any different type of material that we are interested in
and it should be noted that efficient recycling of a process depends upon the optimization
of every step that we are looking at production the production of goods primary or secondary
utilization in end of till end of life it is recovery from end of life to the scrap
utilization or the recycling unit and then after recycling unit the metal or material
should come back to the primary cycle this involves optimization at lot many different
scales within the unit operation itself and at the consumer and as well.
So, now we have completed the overall recycling of various wastes that we had to discuss on
zinc we will be continuing our discussion on different waste stream from other sources
in the upcoming classes. Thank you.
