Making a Bronze Corinthian Helmet (Part 1)

Forging the Past
1 follower
2 Video Views·Jul 11, 2024
I contract a Corinthian-style helmet from silicon bronze. I make this helmet in 2 pieces, which are welded together with a tig welder using a silicon bronze filler rod. The traditional Corinthian helmets were made from a single piece of bronze. The method used to do this is currently a hotly debated topic among historians. Some feel they were raised from a sheet of bronze. Others propose they were cast to a partially finished helmet then custom hammered to final shape. My personal hunch is the 3rd hypothesis in that they were hot dished from a block or thick disk. I plan to experiment with this method in future videos.
Hi there, Thack from Thack Ironworks. Welcome to my channel. Today we are going to be building a
Corinthian helmet out of bronze, silicone bronze. So probably the most iconic helmet of all time.
I'm thinking it's just something that really stands out and a very unique style of helmet
and something that I am very excited about making in silicone bronze. I have one here
that I made many years ago out of brass and this was made in a very rushed
time. I was for some film shoot whether it was a tv show or a commercial or something like that.
I had to make this in within a day and it was done very crudely and roughly and out of brass as I say.
So I've never really been quite happy with it. It's served me well over the years but I'd like
to make something a little bit nicer and with the silicone bronze to go with our bronze breastplate
and shield part of our continuing series of making this Hoplite's full kit. Now I've lost
the template from when I made this one so I just extrapolated a template off of what I've got there
and this is represents half of the helmet obviously and I've got the nasal coming out
putting the full nasal on on the one piece here. I'm not going to cut out the eyes at this point
but this gives me a starting point to trace out onto my bronze and then from there I'm going to
have to raise this piece and there's quite a bit of distortion that happens as this edge comes in
and gets that deep depth to be able to meet to the other one. So this is our starting template let's
begin. Okay so what I'm going to be doing now is got my piece of silicone bronze this is 18 gauge
by the way or the rough equivalent of that and so I'll be heating this up and working it over a ball
to raise up that shape. Raising is different than dishing. Dishing you're working from the inside
and you stretch the metal but it will get too thin eventually and you'll break through. With
raising you're actually thickening the metal around the edge and I actually have to make this
perimeter shorter in order to get that shape so that's where the raising is a much more effective
way to do this shaping and I know what you're asking yourself why am I not raising this entire
helmet out in one piece and the reason is because I'm not sure that's even possible.
The archaeologists are now saying they think that the Corinthian style helmets with that
shape on there with such a extreme shape was cast and then worked so cast to a basic shape and then
hammered out from there. I'm not sure about that I don't really know enough about bronze casting and
if you can work it after that and how that all plays out. I just know that doing this out of two
pieces is challenging enough. We will be TIG welding it together with silicone filler to
create the finished helmet. So that's it let's begin. This is a long process so I want to bring
it up so I can see some color. I have to be quite vigilant if you get it too hot in a cold forge
like this it's just going to disintegrate and burn away and that's not what you want to happen.
This is an expensive material and after you've got some time into it that's a very disheartening
thing to have happen. So it should be noted I'm hitting like this where I'm not actually
hitting the ball or pinching the metal between it I'm actually pushing kind of coaxing it
against the ball there pushing it down and then slowly incrementally you're able to form it around
two passes with the raising and now just checking my the length of this edge here which as I said
when raising we have to shrink this down this length has to get shorter. So in measuring
my template I measured from here to here 32 inches and then in doing this one we're at 28
and three quarter 28 and a half. So we've lost over three inches in length and there so we're
in the right direction I'm not sure if you can see sideways there we've got a fair bit of depth
there but we're halfway maybe we still have to get quite a bit more depth coming out of here. So I'm
going to go back and starting in the center do another pass pushing this out and raising that up
so we're pushing the metal in and shortening and thickening this edge microscopically but
incrementally it will get a little bit thicker in here as this shortens up this is subtle stuff
kids. All right so pass number four I just did a measurement there and I'm just over 26 inches
which means I'm at my appropriate length for this edge now so it is officially rough
formed you can see the shape is kind of there so now what happens is we'll move to the
shot bag and start dishing from the inside and just refining refining this shape there's a
long way to go still. All right so just checking with my gauge here the parent stock what I got
from the mill is 18 you won't be able to see the numbers probably on that that's 18 gauge
and then as I come across to here and try various places I can get 17 there so microscopically it
has gotten a little bit thicker you can also notice that the edge has is corrugated kind of
like a bottle cap welded over there and I when I get out to the very edge there I'm very
light on my hammer blow so I'm not dishing that out and stretching that area undoing what I'm
trying to do by shrinking this edge here so I kind of leave that little waver there this will
be trimmed anyway now working from the inside I'll be able to kind of dish out a little bit
to meet that so that is the first part of this process now more shaping
I've got it roughly dished to shape now I've left the bottom is flaring out roughly to where it
needs to be so I've just taken a little time I've drawn on the line for the ridge here I've drawn
several lines trying to figure out where I aesthetically would like that dropping in there
and I think I've got that one figured out now so I'm going to do that I've also got the eyes and
the ear I've decided to do a cutout for the ear I've seen a couple helmets like that I kind of
like the effect of that so I've just got them placed in there to while I do the ridge and then
I'm going to have to redefine where exactly I'm doing all that let's begin so I've rough formed
the ridge now the overall shape is there it's worked hard in quite a bit so I'm going to go
over to the forge and heat it up and anneal the whole thing then I'll come back and start
fine-tuning this shape and then I will start working on the eye and ear and raising out those
areas okay so I have got it shape here and what I've done is taken my template figured out where
the eye holes are going to go that is the inside line and then I've drawn another line inside of
that which will be the actual ridge which is I'm going to start forming that over the stake
try to do that from the outside and then I'll have to go in and punch it out this is going to
be a long and fiddly process you can see I'm coming to go going around the eye and all the
with my raised ridges here now what I'm doing is redrawing in where I'm going to cut out
to create the openings here obviously I did all that raising before I cut that out
otherwise things tend to really just warp and distort it's much easier to hold things in place
putting the ridges in before you take the eyes out then also you can make it conform to what
you actually do with the ridge as opposed to trying to cut it out and do the ridge after
which is trickier so this tends to be a better way for several reasons so different ways that
you could cut this out you could just drill a series of holes and go in with the die grinder
I think what I'll do is go old school and just get a cold chisel put it over the ball and just start
working a line here and then I'll have to go in and clean it up with some files
maybe the die grind or something like that all right so I just got it on the ball there
no pun intended and I started to do a chisel mark on the inside of my line I will then
file up to that right now I'm just creating this ridge here I'm trying not to punch right
through where I'm going to put scarring on my ball there I don't want to do that
so I'm just going to go fairly deep and then I'll have to go from the inside and do the same thing so
awkward process all right so time has elapsed and we're finally back to this project here again so
we head to one side and I have gone ahead and made the other half here and got them mating
together nicely here's how I did it so once I had this piece how I felt it should be I made up a
cut out that fit onto the profile there and then use that on the other piece to get it close
that takes you so far but then because there's so many different changes in there I had a few of
them but you have to really look at the two pieces together and then balance out anomalies
and try to just make everything from a bunch of different angles balance out part of doing that
is actually riveting the piece together using a piece of steel and I will put my two pieces
together now to show you that you could use clecos and something like this but because
the multiple times having this bolted together and banging on it and stuff like that the holes
got reamed out to the point that they don't actually hold the cleco if you don't want to
talking about that don't worry about it doesn't matter so I've got 3 16ths bolts here I'm just
going to temporarily hold it together using that so I'm obviously making the helmet out of two
pieces and I think some of the earlier greek helmets were made out of two or more pieces
where they actually would form out the halves or whatever and then riveted them together
very much like what I would be doing here the later
Corinthian style helmets were made out of one piece this is where you enter into
kind of a debate that is going on and how they were actually made the general consensus is that
they were formed raised from a single sheet of bronze and that brought the whole shape brought
down and formed it from a single piece hammered out a very time-consuming process very laborious
but that is the general consensus how they were made seems to be a theory now that they were
perhaps partially cast and I don't know maybe and then hammered to fit like they would finish
hammering to shape after they were partially cast the way I'm understanding it from what I read
in this article was that it was kind of a bell shape that would be smaller and thicker than the
helmet the finished helmet and then it would be hammered out over the stakes to thin it out and to
create finish the shape off and bring it to the final finished shape in doing so you could leave
areas like the nasal thicker and around the brow ridge thickest the whole brow would be thicker and
thinner in here which was the historical forensic evidence seems to suggest same thing could be done
with raising it from a single sheet in that the sheet was probably wouldn't start out at the
finished thickness it would be something thicker than that all this stuff I knew going into this
that I did not have the time to to devote to anything like that I knew right from the start
for my purposes for my helmet and for my video I was going to make this out of two pieces welded
together I actually read in one article I never kept a source on that I'm kind of curious about
it they said that they were made of several pieces welded together and I'm thinking that
person really probably didn't understand the process because I'm not sure in a historical
sense how you would be able to do such a thing I have done brazing in the forge with heavier pieces
of steel but to do something as light as a helmet I'm not convinced that that is really a practical
thing although I've also read that the statues that they made the greek statues that were cast
in bronze but the helmets are the heads were actually usually a separate piece that was
brazed on after once again I'm questioning on how they were able to get fire or heat where you need
it without melting or destroying what you're working on to get the sufficient heat to the
area and do that without the use of a torch I don't know could obviously we need some more
research on that I'm very interested in it but today we're just making this out of two pieces
we're going to be TIG welding this together using a silicone bronze rod
okay so I've got this over this stake here with the two pieces bolted together and this allows me
to get in and just kind of make these pieces top of each other they're one over top the other and
then mate things together quite nicely in anticipation for welding this together
I just did this little design here it just kind of presented itself as I was working on it I did
this the overall shape of this helmet I did is one of more of the earlier Corinthian style helmets
is shorter in the face here doesn't have that long cheek guards or neck guards I guess you
would call them I went for the shorter ones there I also went for larger openings here
and I made for a shallower dome for the top of it as well which didn't leave me a lot of space
in there a lot of the really iconic or most common style that you always see of the Corinthian helmet
has that extra brow ridge in there didn't really have room for that in the shortness of how I did
this one and then again I said this is all kind of earlier style then I went and did the ear scoops
which is is like the other end of the spectrum much later in the Corinthian helmet design so
this this helmet may be a bit of a bastardization although I've seen a lot of different versions but
I'm kind of going early like pre I don't know 600 BCE and this is more like 400 some somewhere there
anyway I'm looking at this from a sculptural point of view and I'm just kind of playing with
the design not too married to to making one historically accurate version that I'm seeing
I'm not imitating one I'm kind of taking different aspects from a few different designs and just
seeing what I come up with here all right so I've ground the wells and I've hammered over
the top here to try to blend everything in get it all smoothed out I had a lot of fun reworking
this front part here there's some distortions haven't quite figured it all out yet but I think
we've got enough that we can finish this off for the purposes of this video in a future video by
the way I will be doing the crest for this and then we will be padding it and all that stuff but
for today we just want to finish this video get a helmet for you so what I'm going to do now is
paint this whole thing down with gun blue and then we will get some sort of finish happening here
so I've gun blued it and then I put it in water to neutralize the acid while it's still wet I'm
going to grab some steel wool here and start finishing it off as we've been doing the other
pieces in this hot light build the breastplate for example put a mask on here so if you see
my breastplate video you notice on that one I as far as finish I didn't grind it to a nice smooth
mirror finish or anything like that I left the hammer marks in so in keeping with that whole
theme that's what I am doing here I like the I don't know tool mark the texture of that to me
as a maker and as a sculptor I just find that very aesthetically pleasing so
that's why I'm doing it also saves me a lot of time grinding
and there we have it I still want to do a little bit of touch up on this but I will be
in a future video making a crest for this so I'm going to do a nice reposade piece for that
and at that time I want to do some finish work I need to do a little bit of tweaking in here and
everything get that finished off but you get the idea we've got our basic helmet here and just even
put it on my head you have fits and everything like I said I went with the earlier period with
the shorter face there I think if I do it again I'd like to do the later Corinthian with the
longer face guard in there I just didn't want something that interfered when I'm wearing my
breastplate and scratching that all up so I'm very happy with the design here I think it came out
quite nice as I said earlier in the video this is probably the most iconic design as far as a
helmet and many people have pointed out that it has a very phallic sort of shape kind of looks
like a dickhead anyway all that aside I had a good time making this and I would like to do more
of this stuff as I stated this is not a 100 historically accurate build obviously in welding
the pieces together and I would like to experiment more with that in future videos and I found from
doing the rest of our hoplite kit this the build for this video series especially the
get a lot of comments on that and I get a lot of people weighing in saying well that's not
historically accurate you should have done it this way you should have done it that way
and I think I'm at the point now where I'd like to do a follow-up video for the shield and then
probably for the breastplate and helmet after my build which is not historically 100 accurate
where we have some other experts weigh in and by experts I mean people that can get me some
information with where you can cite sources point me at least in the direction of some books
and some articles and stuff like that and see if we can't build a more academic kind of research
and I make a follow-up video for each of the videos for these builds like these builds kind
of represent a tutorial for people who might be interested in doing this but I also realize that
there is a lot of historian or would-be historians out there that want to learn this just to just to
see how things are put together and from a historical standpoint and I think in my Greek
shield video I called you guys techno nerds and I was I've got a little bit of flack for that
hopefully you're understanding that by saying that I'm grouping myself within that category as well
and I am realizing that there is a small segment of the people out there that are really hardcore
and they want to learn everything that there is to know about Greek armor I'm approaching this from
my experience in making armor mostly for the film industry over the years and really I'm coming in
from a sculptor's standpoint that's the way I see myself and I'm really doing this from an
aesthetic sort of prerogative however having said that now as I do this I'm becoming more and more
interested in the historical aspect and how was this done how was it was it raised from a single
sheet of steel was it a block that starts out and was able to be shaped last minute addition
to this video while we are doing the final edit Eric is just in the process of getting the final
edit together the guy behind the camera there last week in thinking about doing traditional
helmets out of one piece I stumbled across one of Slava's videos Slava has the channel
it's world of armor armor smith guy from the Ukraine a very talented smith I just love his
work and his channel is really good he does really nice videos good sense of humor but
really good workmanship so we'll do a link here so go here or here wherever Eric's going to end up
putting this check out that video check out his channel he does really good stuff anyway he was
talking about making a helmet and shows it in this particular video out of a block of steel starting
with a block of steel pounding that out and actually hot dishing that so I was pretty intrigued
by that because I've been thinking about that for many years and I've just never gotten around to
trying that experiment so I had a couple of these things sitting around a six inch disc quarter inch
thick so I took that and I thinned out the edges brought them down to about a sixteenth of an inch
and then I took a ball peen hammer I had and I modified it stretched it out made this gooseneck
hammer here and started hot dishing it into a hollow form here and in four hours I was able to
achieve this which is remarkable speed for that sort of thing and I just I got to this point and
actually my hammer was starting to bottom out I could go further with this but I think it proved
its experiment I found that this was a pretty exciting process that I was able to quickly
achieve a shape like this and I think it lends itself well to doing a full Corinthian style
helmet out of a chunk of bronze and being able to hot dish that out much quicker than taking a thin
sheet and raising that which is a much more complex process so this allowed me to achieve
the shape fairly quickly and I think it has a lot of potential very intriguing experiment and I plan
to do more experiments in the future we'll be having videos where the next one I'll do is a
single piece helmet maybe a Viking style helmet out of steel so stick around comments I'm sure
I'm going to get a lot of them so I hope to hear from you you're going to see the crest you're
going to see the rest of the outfit coming together in the upcoming videos so that's
it for right now I will see you soon back out see ya
