WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
this is the fourth snowfall of the Year
2024 it's about an inch and a
half actually maybe just an inch so just
a nuisance really either way I'm going
to use my electric snow blower and just
clear it
out
[Music]
and as quickly as the snow fell the day
later it's
38° snow just melts
here hey guys welcome once again to
another episode of mowers and
blowers calm cool don't get the blood
pressure going early in the
morning anyway as you saw from my
previous
episode previously on mowers and blowers
with a lot of play too um and I put the
good one the sector gear out
or much better
condition with a better
one
which is what
I'm I made it just laun lowers and
blowers you guys figured out exactly
what I was doing with my secret project
I'm actually making a six-wheeler not a
6 by6 although I thought about it but it
would take way too much work for what
you know what I mean it's just a theme
tractor so I'm just making it a
six-wheeler we're going to today we're
going to mount this fifth and sixth
wheel onto the tractor in the rear by uh
drilling holes with this part here onto
the frame of that for me to properly
measure the height and of the fender and
all that I want to put 20s on the rear
these are 20s here these are 18s because
they're 18s they're going to be a couple
inches shorter in height distance
between this wheel and that wheel so I
have to get the proper measurement so
the first thing I'm going to do is I'm
going to take these 18 wheelers off of
this I'm going to go in the back uh shed
where I have that red and
orange tractor that I fixed this uh
previously those have 20s on them I
don't care which ones I sell whether
they have 18s or 20s on them but I need
the 20s for this project so I'm going to
take these two wheels off go to the
backyard swap them with that tractor
bring the 20s back out here then we'll
have a proper measurement and then we'll
get to taking these wheels off putting
this on a Jack or something like that so
it holds it at the right height connect
this to that just do some measuring to
make sure I connect it right and then
we'll see about mounting this thing to
here and then making some kind of a rear
bed deck dump thingamajig up here so
that we could use it for utilities
picking up stuff hauling stuff all that
stuff I was tempting to take this wheel
off it just would not come off I was
banging and banging it and look what I
did the entire transmission shaft came
out so that's a big problem and I
basically didn't even have to take this
wheel off because look I got a 20
sitting right here such an
anyway uh this is not broken but
it's a pain in the ass because there's a
C clip that attaches to this on the
inside of the transmission basically all
the banging made it come off so for me
to be able to sell this tractor I'd have
to fix this
transmission how do I get myself into
these messes you know what I mean not
that this was ready to sell anyway it's
not but uh it's just more work for me
you know what I mean so to get back in
there I got to take the bottom of that
transmission out put this shaft back in
find a clip clip it back onto This
Groove and that way this whole Shaft
won't come back out again nevertheless
still can't get this wheel
off that's a
problem you know what I'm thinking now
thinking that maybe I should use the
transmission oh man what a delay I'll
have to think about this for a bit so I
just shoved the the shaft back in there
looks like uh when I get with this
project I'm going to have to open up
that transmission or something and fix
it h that'll be interesting actually
I've never actually done that before so
anyway I'm going to leave that 20 on
there I took the 20 from
here so I have my 20 for the other one I
also was in the back shed and I noticed
that I had this rear fender from an old
style uh you know LT 4000 with this
really nice Hood that's more squarish
that would look more military than the
round one I have so I might consider
using these parts to fabricate uh the
look of uh this current project s
wheeler all right that kind of sucked my
blood pressure must be high right now so
as you saw I created more work for
myself by breaking a perfectly working
cable tractor to now a one with a broken
transmission when you have something
unfortunate you just have to look at it
as hey that's another video you can make
about something that you've never done
before and that's the only way I could
look at it the only thing that uh that
makes me feel better is that that wasn't
ready to sell anyway cuz I still had it
to paint had to paint it you know anyway
so now we're the job at hand putting two
20s on this rear part so I can kind of
measure and fit it properly also I'm
going to try some different parts to see
if I want to make it look better because
as you see this Hood this is the rounded
kind of modern Hood I want to make this
look as military as possible so having
the square body type Hood may be
better and also I'd like to make some
front fenders so I got these things
maybe I can cut them and make front
fenders for the front wheels that would
look really
unique
[Music]
so as you saw I tried a lot of different
combinations with three different deck
Lids right um fenders I mean and looks
like this this extra one that I had for
off a very unique LT1000 where it didn't
attach to the foot the foot uh um you
know the foot stays you know the
platform with the it was you know
separate um from from stock you know it
was very unique and so I figured I'd
flip it over and it perfectly uh well I
had to move the seat bracket up a little
bit I tried different holes that was
accommodating it and I have one right
here which which is perfect right here
you see how before when I had that other
one the the original gray one it came
down like here and it looked kind of off
you know what I'm saying at least here
this is a nice straight line you know
the deck is level somewhat right I'm
going to make another bracket over here
to hold this up because this is kind of
floppy but I think that once I put place
my platform over here it'll be better
but I I kind of like how that swoops
down the fender that covers the rear
like that and it's you know pretty much
you know level with this uh I might make
some kind of a sheet metal thing that
goes like that to to complete this this
this you know this Fender like that
later on but I need to First attach this
to that so
um going to have to jack it up to this
level and Mark it so that it's perfectly
like
that what do you guys think you guys
like the green
one because it matches the shape of the
the round the rounded fenders this is
exactly the same same one see uh had I
used this one which it looked pretty
good too had I used this
one this is a little shorter with
Contours a little better but then this
doesn't really match that you following
what I'm
saying that looks pretty good too
though well I can't decide really but I
think because this green thing I've had
for so long I kind of like the fact that
it goes longer you know it gives the
appearance of this being
longer so I think I'm going to go with
[Music]
this okay I have it on jack stands and
I've lowered it just so it there's a
line that I drew right there I have to
drill a couple of holes into there and
throw some bolts in there and that ought
to hold that side and then I'm going to
do the same to the other
side all right so I used a couple of
Step bits step drill bits and I was able
to drill two holes right in the center
of this Frame right that go goes right
into this Frame and use the same size
bolts that it's supposed to have uh it's
not 9/16 it's a little bit bigger than
that it's not 5/8 I mean I don't think
it is but anyway it it's in there and
remember this is just supposed to just
hold onto it you know kind of like a
trailer um the wheels will support
weight on that you know what I mean it
it's not meant to be structurally like
part of this I mean I might do another
bar that goes there but really you don't
need it it's only supposed to be used as
like a trailer sort of you know it's
just pulling this part behind it's not
being powered by anything or
anything or
anything that ought to do it I'm going
to do that to the other side
too
okay we're on the right side now and man
this one came out better than the other
one uh the the bolt went in it's like
those it's not even a self Tapper but
it's like kind of sharp at the end you
guys know what I mean those big ones and
that drove right through there so much
that it look it it bent it inwards so
you know that's solid right there I'm
pretty satisfied with the way that
turned out I'm pretty confident that
that rear rear end here the sixth set is
securely onto this Frame uh technically
you could only just did one bolt and it
would have you know just held it
together but having two bolts on it is
really
secure yep so I'm going to put that
wheel back on again uh um you know I I
do need better tires because even though
I put ATF in these things that one over
there is still leaking out so that was
no good uh like I said a work in
progress though I've got so much more to
do but the main structure of it is is
going to be done today which is
great
all right what do you guys think you
guys saw right when I was jacking it up
the rear went up with it which tells you
that it's solid on
there no drooping or anything it's
solid I like I like that rear fender now
when I reversed it like that
uh it's level with that with the Breer I
I think that's really cool and also the
distance between the two wheels it's uh
it's about two 2 and 1/2
in that looks closer doesn't
it well I don't think it'll make much
difference so I have to make this part A
little I have to build some kind of a
bracket there that holds this on because
this part is only held on by these two
bolts here onto what used to be the seat
uh where the two Springs go that's where
that's what this bracket is from where
the two Springs that hold the seat like
that that's where that's bolted on but
this part
here I need to build some kind of a
bracket that holds this back part more
solid cuz it kind of wobbles a
little that looks pretty cool hm H so uh
being that this theme is going to be a
Humvee Right This Hood is kind of modern
looking kind of too rounded I know from
my other Des desert sand uh machine I
had the rounded
[Music]
hood boy oh boy what fun really fun but
I think this would mimic more better
with a square kind of hood uh you can
make it look more like a uh Humvee front
uh I'm going to stencil the grill of a
Humvee and and paint over the front end
so I'm going to try I'm going to try
this Hood you guys tell me which one you
like
better so you guys tell
me
look look at it right now right like
this these all fit on LT
[Music]
1000s I
see so the air cleaner is in the
way I take the air cleaner
off just take the air cleaner off it's
too fat it's too wide the air cleaner so
maybe if I take the air cleaner
off it still has studs
there
[Music]
uhhuh studge it in the
[Music]
way it barely fits on this side too I'm
have to stretch
it anyway uh or that you like that
better what do you guys think and then
the hum V is basically a round circle
for the
headlight and then you have like
vertical lines that go up like that and
picture this all desert sand color you
know
fde feel Dark Earth uh what do you
think I'm going to let you guys decide
okay round eight is round B is square
leave it in the comments right now what
would you guys prefer I mean I could
stretch this out to make it fit that's
what she
said so don't worry about that but uh
you guys let me know uh interactive
subscriber decision a for round the
first one or B for the square one or you
can just type in the comments round or
Square I'm going to take the votes
I don't know for a few days whatever and
see if it's an overwhelmingly thing you
know if I see everybody wants to round
one that makes it look better your
opinion is that it looks better right
never mind um that it matches a Humvee
type theme just whatever looks better
picture it like the original color that
that the first one that I had the desert
sand color you guys know what I'm
talking about that color anyway tell me
round or Square all right and
uh I
don't it doesn't really fit all that
well I have to stretch
[Music]
it some of you guys may be wondering you
saw these yellow wheels to the side what
are they for well actually these yellow
wheels are actually front wheels if you
guys have noticed there are some John
Deere tractors out there that have 8 in
front wheels and 12in rear wheels
without having multiple lugs for the
rears just one single uh that's great I
wish I had four of those because if I
had four of those I'd put those in place
of the 20s I think those are 24s which
is really cool I have two in the back
but I only have two I need four but
anyway I was thinking maybe I'll put the
8 in to replace these 6in ones in the
front bigger the better uh and these are
in good shape I believe they all hold
air you know but I'm not not sure I mean
they're designed for the fronts so but a
John Deere though I don't know if
they'll fit uh Craftsman only one way to
find out I'm going to see if these
things fit on here without having to
grind down the hubs on those things
which is what I did with the first uh
desert sand tractor that I made I had to
grind the hubs and I put 20s in the
front you know which is really cool but
I don't want to want to ruin the wheels
like that and it's kind of wobbly too
cuz you never really grind it so smooth
and perfect you know but uh yeah I'm
going to try and see if these things
just fit on
[Music]
[Music]
here we've been testing this so much
that I ran out of gas I'm putting a
little bit of this old gas Vine injector
cleaner that I got from someone I don't
even
remember uh it's clear so it maybe just
adds to the
octane and uh cleans out the carburetor
whatever it's just sitting around this
stuff you guys ever seen this before
I've never seen it before anyway I'm
just using it just add to the
gas add to the combustibility hey now
there's now there's only one thing left
to do after we found out that these
things fit huh does these look great or
what put the uh rounded hood back on
here again
just for the effect you know but how
about that look at that does that look
nice you guys think that looks good I
think it looks great what do you say we
take it for a
ride I wonder if backing up in this
thing's going to be
tricky
I
so I think the for some strange reason
the rears are higher than the fronts
which is no good so I might have to pump
these up yeah that's what I have to do
so this tire is leaking right this tire
sucks this wire is leaking too the other
side of this is also leaking but the
rear the right most rear is good so it
was holding up that
one so the tires were spinning I just
pumped it up so let's see how what
happens
[Applause]
[Music]
now
[Music]
a
he
so because when you turn sharply the
rear swings out and the uh cat clip that
I had on there wasn't a good one so I
need to put a good cat clip on there I
don't even know the where it went I put
a new seat on there hope the wheels fall
off
[Music]
again
so the rear does
sway it sways from the left to the right
as you're
turning
[Music]
yeah driving around a six
Wheeling LT
1000
awesome nice wide turns would be okay
uhoh I lost the
wheel I guess maybe that's why there's
there's nobody that has this out because
it doesn't
work
you just got to make sure that you have
a really strong C clip because when you
turn sharply that rear swings out and
wants to drag that wheel right off you
know what I mean so that's interesting
you guys think that because I put the
bigger wheel in the front it makes the
difference if I had smaller front wheels
do you think it would still sway like
that I think it still
would but how about it guys what an
experience this is the first time I've
ever driven a six wheeler ever in
anything I'm glad that I own it still a
lot more touchup stuff to do fabricating
some brackets to hold that thing up
fabricating some kind of uh you know
rear
dump cage place where you can put
on right uh let me know again in the
comments whether you like the round one
or the square just write round or Square
or a or b uh I like the front wheels
that way uh I have to figure out which
wheel I want to swap out you know
because I think because these are the
only ones that drive they should be good
because if they leak air and the back
one doesn't this is just going to spin
and I won't be able to go anywhere but
it's good to know that uh the the
attaching the rear onto the frame is
good otherwise it wouldn't hold the
weight of this you know what I mean so I
I think I did a good job securing that
end to this end uh I just got to work
out which wheels are better whatever um
you think if I had thinner or smaller
rear wheels it would be better like what
if I put now you couldn't do that I was
thinking about putting front wheels in
the back right smaller front 6 in but
they won't fit because there's no keys
for those so it can only be these but
what if I put 18s on you think it would
make a difference I don't think it would
because it's still wide right that
wide I don't
know I guess I'm just going to have to
not make sharp turns and have a very
strong C clip attaching the wheel on
there you know this one didn't fall off
so I think it's just a c clip that I
have to make sure it's nice and tight on
there but how about it guys uh plenty of
stuff to do obviously painting it and uh
it still leaks a little oil from the
cracks of the engine what are you going
to do right it was free free
free the whole thing was free you know
what I
mean that's what I love about it is that
there's no loss if nothing works because
it was free you didn't put any money
into it I didn't put any money into it
the only thing I put into it is the new
battery in there 25 hours hope you guys
enjoyed today's episode glad you guys I
can now actually put this in the
thumbnail
now see you guys next time on mowers and
blowers here at mowers and blowers we
push them into the
garage but they come out
[Applause]
driving you got to go bing
bing Henry address the bullet hello
bullet hello
bu
SK
better