Lecture 33: Plasma as a Fluid: Fluid Equation -II

IIT Roorkee July 201
61 followers
Feb 22, 2024
The discussion on the equation of continuity has been continued in this lecture to obtain a simplified form. Using the Lagrangian control volume, another form of the equation of continuity has been derived. However, it is explained that both forms of the continuity equations are the same.
hello dear students we will continue our
discussion on continuity equation and
how we can derive different forms of the
continuity equation by using different
control volumes so
far in our discussion we have seen the
rate of change of mass into the Ulan
control volume can be written as DM by
DT is equals
to minus do by dox of row U Delta X
Delta y Delta Z
minus do by do y of Row V Delta X Delta
y Delta Zed minus do by do Z of row W
Delta X Delta y Delta Z we can divide
this
expression
dividing by Delta X Delta y Delta Z
which is Delta V which will become 1 by
Delta
V DM by DT is equal to minus do by dox
of row U minus do by doy of Row V minus
do by do Z of row W since the mass that
is uh the independent variables here are
x y z and T we are evaluating the rate
of change of mass with respect to only
time we can write it as do
M by do T into 1 by Delta V since mass
divided by volume is density we can
write it as do row by dot
is
minus do by
dox of row U plus do by do y of Row V
plus do by do Z of row W or the partial
change of density with respect to only
time will be equal to all of this can be
written as the Divergence of
this
scalar D dot row U or if you have to
write U as the vector it can
be right so this can be
minus D
dot row
U where U is a threedimensional
component of velocity
UI Plus
VJ plus w k bar so now we have to just
recall D is I Do by
dox plus JC do by do y plus K cap do by
do Z you multiply with a row this
expression take a DOT product of this
you will get this relation so taking
this relation out we can write do row by
do T is
minus D
dot row U the rate of change of density
with respect to time is equals to the
Divergence of the mass flux right so
this is
one representation of the continuity
equation we can slightly get a different
form of this by using a vector identity
let's say we can write D
dot row U is equals to row
* D do
U plus
u dot del row because row is a scalar
right
so we can
write
minus D
dot row U
as minus row
* D do
U minus U
do so this is what we have on the right
hand side of this equation what is this
this is the equation of
continuity this is the equation
of Contin new so we can use all of this
on the right hand side of this
equation so this expression only is only
valid when you have del row that is like
row being a scalar del row the gradient
of this density is non zero that means
you expect the density should be
changing within that right then that
means that you are you are referring to
different points in the
flow right so let's substitute all of
this is
minus
right so we can rewrite it as do row by
do
t
plus u
do del row is equal to minus row
* Del do U what have I done anyway you
look at this expression I've have taken
the right hand side of the equation of
continuity and using a simple Vector
identity I have expanded this that is D
is operating d as a vector operator
operating on this
product and so this is D first operates
on the velocity because it is a vector
it is a scalar product and when it
operates to when it operates on this
scaler this is how you get right now I
have taken this term to the other
side multiplied with a minus the entire
expression becomes this and it turns out
this expression has the term which is
something related to the uh total
derivative right so I substituted all of
this in the place of this on the right
hand side and pulled this term which is
this term to the other side
or I have taken this term U do del row
to the left hand side right now what I
have on the left hand right now is
the partial
change in the density with respect to
time plus an adicction term right so
this is from the standard definition of
the total derivative so total derivative
is equals to the partial derivative of
the quantity with respect to time plus
an advm which basically accounts for
change along the motion right this can
be written as d by capital D by DT is
minus row *
D
dot U this expression is called as the
velocity Divergence form of the
continuity equation this is also the
continuity equation but this has a name
because you have the Velocity Divergence
appearing on the right hand side this is
earlier form had the Divergence of mass
flux but this has the Divergence of
velocity right now look at this term why
I have written the the total derivative
total
derivative as long as your independent
coordinates are x y z and T right these
are the independent coordinates as long
as you are trying to measure change with
any one of these you have to think of a
partial
derivative but if you trying to measure
change as a function of time and also as
this control volume is moved moved from
one set of space coordinates to another
set of space coordinates there is a
change so this change that is brought in
because of the changing space
coordinates is represented by this and
because of the time that elapses from
one point to another
point is represented by this so a
combination of these two is called as
the total
derivative earlier we had this equation
of continuity which is is written in
terms of partial derivative this form is
using a total derivative this is also
called as the
velocity
Divergence
form
of
continuity equation now we are still
left with the task of deriving
the continuity equation using a
legrangian frame of reference or sorry a
legrangian
control
volume what is the difference between
the legran control volume and thein
control volume the Legrange in control
volume is
something which is moving with the
fluid it is not at rest right now it is
it is moving with the fluid earlier we
had the control volume fixed and the
budgets were calculated with respect to
that volume how much is going in how
much is getting out now for the sake of
Legrange and control volume what we will
do is we will consider a
small mass of particles Delta
M
whose uh mass is Delta M and we can
write it as row Delta X Delta y Delta Z
what about this mass of particles this
is the volume itself so you have this
small packet of the fluid now you are
looking at this fluid this point and
this Mass this mass is going everywhere
like it is following it is moving along
the fluid right now obviously since now
the m is involved we cannot think
of finding out the
change only with respect to time we have
to think of invoking the total
derivative so the relevant derivative
right now is d by DT that is the basic
difference you see you go back here we
had the control volume which is fixed
right now you assumed that XY Z are
constant and you're only changing
something let's say density only with
respect to time that's why you had the
partial derivative in place but now
since it is moving everywhere you have
to think of the total derivative in
instead right so the for the
conservation of mass Tim Ely when you
talk about deriving the continuity
equation you're only referring to the
conservation of mass so the uh for the
conservation of mass let us say that
this Delta M the mass needs to be
conserved so whatever the changes Delta
M will remain a constant okay so that
means that we can say uh we can write
a fraction let's say Delta m d by DT of
Delta m
okay which is 1 by row Delta
v d by DT of row Delta V so we can write
it
as 1 by row Delta
V
times I'll keep row outside and D of
Delta V by delta T plus 1 by row Delta V
I'll keep Delta V out
side d by DT of R is equals to expect
that this to be zero for the
conservation to work it this can be
cancelled and this equation can be
simplified as can be simply written as 1
by
Row D row by DT
plus 1 by Delta v d Delta V by D DT is
equal to Z fair enough right so this is
Delta V is the control volume right so
Delta V is Delta X Delta y Delta Z so we
will expand it again so 1 by Delta X
Delta y Delta Z
times d by DT of Delta X Delta y Delta Z
is equals
to 1 by Delta X
d by DT of Delta x what happened to
Delta Y and Delta Zed the moment you
keep them outside and you operate the
derivative onto Delta X this will these
two terms will get cancelled with the
denominator that appears outside the
derivative right so that is a simple
step that
I'm not writing here but you can follow
it+ 1 by Delta
y d by Dy of Delta y + 1
by Delta Z Dy d z of Delta Z Now the
this is one Expressions right so we have
this expression plus all of this and the
summation should be zero now let us say
the control volume that you have we have
considered is moving with respect to
right with respect to the fluid right it
is moving right so let us say the
control volume at a point a has a
velocity
UA and at a at another point B has a
velocity
U so UA can be written as DX by DT and u
a subsequent point in time is d by DT
of X Plus Delta X at a subsequent point
so Delta U the the change in the
velocity Delta U is nothing but U minus
UA which is basically d by DT
of x + Delta x minus d by DT of X or we
can write it as d by DT of Delta X the
point is I'm going to call this this
one as U Delta U okay so we can now
write 1 by Delta
v d by DT of Delta V is already 1 by
Delta
x d by DT of Delta x + 1 by Delta
y d by DT of Delta y + 1 by Delta z d by
DT of Delta Z
which is nothing but d by DT of Delta X
right this is nothing but Delta U so
this is Delta U by Delta X Plus Delta V
by Delta
y plus Delta W by Delta Z and when you
say limit Delta X or Delta y tends to0
you can write it
as do U by dox x + do V by do
y+ do W by do Z all of it is simply the
Divergence of
velocity the three dimensional velocity
right what is it that we have this is 1
by Delta V of d by DT of Delta V is
equal to the velocity Divergence so we
have two terms right one one is here
this
one
carefully and another is this term so
this time this term has come from both
of these terms have come out from this
simple conservation where we expect the
relative change of rate of change of
mass is equals to Z right now we have
this term is equal to
the velocity
Divergence and we have to think about
this term 1 by Row D by
DT let us write whatever we know so far
1 by Row D row by DT
plus d do U is equals to Z right see
what have done because you know all of
this to be del. U I have simply
substituted all of that
into this equation let's say we call
this equation as equation number two and
this is the primary equation equation
number
one and this is equation number three so
the idea
is put equation number
three into
2 will give you
this right or 1 by
row D / DT is equal to
minus D do U or D capital capital D row
by DT is row
* row * minus we put minus outside d dot
U
right this equation is again the same it
is the continuity equation
the only
difference is
that in this approach we have let the
control volume move along the fluid and
we got the final
expression in terms of total derivative
earlier we had this expression which
is uh this is the equation of continuity
if it is and control volume using some
Vector identities we have converted that
into total derivative but strikingly
these two forms you see this D by
capital D by DT is equal minus row * the
velocity Divergence we have got the same
expression using the legrangian approach
this is the form of legrangian
control lren form of
the of the continuity
equation right so this is the basic idea
of conservation of mass and how
conservation of mass can be established
using aian as well as legr control
volume and how these two different forms
of continuity equation are actually one
and the same let us just write the uh
this one so D do by do T is
minus do row by do T is
minus d
dot rou
right so this is
the
ulian control volume using the ulian
control volume or ulian form
of
continuity
equation
right so we will continue to Explore
More aspects of uh treating plasma as a
fluid in the next
lectures
a
