In this video waterproofing, types of waterproofing is explained. Foundation waterproofing, methods of foundation waterproofing is explained. Methods of basement waterproofing is also explained. What is positive & negative waterproofing is explained.
Your queries waterproofing interview questions waterproofing in building construction termite proofing bituminous membrane waterproofing method waterproofing treatment water tank ips waterproofing procedure box type waterproofing brick bat coba waterproofing procedure waterproofing material waterproofing dr fixit foundation waterproofing coating foundation waterproofing foundation waterproofing membrane foundation waterproofing malayalam foundation waterproofing system foundation waterproofing membrane installation foundation waterproofing tar exterior foundation waterproofing stone foundation waterproofing basement foundation waterproofing henry foundation waterproofing best foundation waterproofing products diy foundation waterproofing home foundation waterproofing basement waterproofing in India basement water problems solutions basement parking construction basement water leak repair basement kya hota hai basement waterproofing interior waterproofing basement floor basement water drain system basement parking house design
Note- NOTE: ALL THE IMAGES/PICTURES SHOWN IN THE VIDEO BELONGS TO THE RESPECTED OWNERS AND NOT ME... I AM NOT THE OWNER OF ANY PICTURES SHOWED IN THE VIDEO ---------------------------------------------------------------------------------------------------------
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in the favor of fair use.
Hello friends, welcome to all of you in the knowledge channel, Let's
Learn Together, in today's video
we are going to talk about water proofing,
what are the types of water proofing,
baseman water proofing foundation,
how to do water proofing, we will see the details on it.
What is Positive Water Proofing and what
is Negative Water Proofing? We will also
see that Water Proofing is a process which
means making any building object water
resistant or making it water proof.
There is a process for water
proofing in very different conditions. We
do different sections of each building,
like terrace,
bathroom, sun portion,
we do water proofing in different parts.
Now types of water proofing,
how is it? Mainly tar in types of water proofing.
Field Water Propin is Vitamin Membrane.
Big Bad Coba is Water Coating.
Sus Water Spring is Crystalline Water Spring is Integral
Water Compound.
Acrylic Base is Water Coating. Protective
and Derate Coat is Injection Grout.
Now in this we will see different types of
potions have been shown. Like see now, the
foundation has to be grouted, the basement
support has to be done, the lift pan has to be done, the bathroom has to be
tucked in it, the terrace has to be tucked in, if there will be a terrace
garden, then everything has to be done for it,
how to grout it, or a little in advance.
Shown foundation water: basement, bathroom, kitchen, balcony, terrace, terrace,
swimming
water, foundation water is a very
important aspect of the building structure,
because one has to take more care in it,
because the foundation is a very
important part of the building,
in this, the construction is built on the foundation itself.
You have to do the toking according to how different types of foundations hold themselves,
and its strength and life of the
building and house
depends on the foundation itself, so
what about a loose foundation?
And stagnation of water is the
main most important problem in the soil. The whole soil is
dead inside it. That too is for the foundation,
why and later the foundation is basement
and
mainly for mode formation or a little. There is danger
for leakage, now we have some
special methods, we will
talk about the water collie of building foundation,
electroosmosis process means fine juice
in it, how is the main structure, foundation
drainage system is a basic setup,
mainly perforated pipes running along with cupping. In the
perimeter of the foundation, a
pie is placed in a line from the foundation perimeter and on its outside side, the
storm water is to be taken out, a well is made on the other side
and the water is
collected there. This system protects any type of water commission from leakage.
In the protecting layers, this layer should be put in the layers of the grave. The
remaining layer of fabric
barrier should also be applied in the same way and
before applying the soil layer, a layer of
fabric barrier has to be applied in the fabric.
These
protect the pipes from clogging. The
sketch on the side is
clearly visible. Just
like
before the system, the filter had to be washed and applied with a solution.
Now, as seen in it, there
is a metal barrier in the course of the pipe. What is the structure and its main purpose?
Stopping whatever comes in and the foundation is its
main purpose. Stopping it from coming into the structure. What is the layer in it?
See the process of applying the layer for the low part. DPC's
course is clean solution. The surface has to be completely cleaned,
after that whatever
level remains 15 cm above the ground level,
water is to be pushed till how much is to be cleaned, after that
cement concrete or suitable water proof
compound whatever is left has to be added to it
in 1.5 inches. In this, a layer of 25 AM thickness has to be
applied and after that
after the mixer hardens, after that
a seal solution and green
powder are applied vertically and
this is to be applied in the entire floor at the
base of the foundation.
Basement and foundation require the
most attention because it can cause
big problems due to water leakage
as water
can come into different spaces and
create dams. Ra, some different
spells may come, there may be some different type of
atmosphere, there may be
some problem due to wetness, bad smell
may also come and in this, if you do not pay attention to this issue then it may
come due to waterlogging. There may be property damage to the
main basement and its foundation may be damaged. There may be
damage to the electrical system as well; the
electrical system in the ground level may be
damaged only after this; the
building may
collapse or else.
There is a threat to the total hole infrastructure as of
now, we are seeing negative support from the
outside, Nav from the inside,
and
from the net side, it is
mainly positive. Surrounding plate
distorts and applies full layer solution in it,
horizontal and vertical layer.
To protect it completely, it is
of measure pressure, outside drilling mind remains
negative for it, there is no other extreme condition, at
that time,
negative can be used, it has to be kept in mind
that the material is not solely strong and
And it is not harmful for the main structure or is
not reliable because it
breaks and then becomes no more flexible and the
pressure does not settle down and there is not
much
pressure. After this, the main cut is done. Some people
use this hacky like
faster application butt. It is important to avoid this
and positive application is mostly
required in the construction basement where one lives,
use something like Kota or stone, stone tie
or you can use shabad sto, you
can also use injection gut ejection ring, now lift burst and sanya negative commonly. While
we cannot normally do this between the main structure and the surrounding area, we can use negative pressure
because we cannot do any action on the sides
and instead we have to inject the
side plates of the structure
from inside to provide pressure.
This is the type of process in which the
filling of the ball layer is done from the tie to the dam to
strengthen the structure. Whatever drum is used
for that, this ground generally
flows on the liquid place which
flows easily and Negligible signs to feel: The guts
flow easily and the guts feel; the
joint feels and the crux feels
and using its pressure
we use different types of grout material in different cases. Fiber fiber ply can be
used for anti underground structure or
mixed with steel glass fiber
for main frame and to increase resistance and
ductility. For Cement
Sty is the most popular
type of economical lab and not
much GAS M and carbon
powder cement or gas firm is used in the gray
mixture and inaccessible crux where the
unbleached pure gas firm is used. This is a very
fast process and experts are required to
follow the process, or to use
sulfo aluminum and
white water, or to use it in cement and
in the manufactured balls, this method requires
curing, meaning it is required.
After it becomes hard, it
needs curing, it remains a mixture and later
expands and gives all types of types and
feels. This method which is better than gas foam method
and is easy, if you
see it is different from this then friends, this is
Here is today's video. How did you like today's video?
Please do comment. If you are
watching my channel for the first time then please subscribe to my channel
and press the bell icon on the side
so that
you can get notification of all my upcoming videos.
Thank you.