Note- NOTE: ALL THE IMAGES/PICTURES SHOWN IN THE VIDEO BELONGS TO THE RESPECTED OWNERS AND NOT ME... I AM NOT THE OWNER OF ANY PICTURES SHOWED IN THE VIDEO ---------------------------------------------------------------------------------------------------------
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in the favor of fair use.
In today's video, we are going to see a practical video of how to make a glass partition in the bathroom.
This is the bathroom.
You can see the glass of the fixed part.
This is a 10mm thick toughened glass.
In this, a partition is placed to divide the bath area and the commode area.
First of all, let's take its measurement.
According to the requirement, the measurement is taken and the glass is marked to be fixed.
After doing the proper marking, the tiles in the bathroom are placed according to the marking.
These are the glass fixtures.
They are of this type.
They fix the glass on the tiles.
Similarly, they fix it vertically on the wall.
You can see this knob.
They give some packing to protect the glass.
After giving the packing, they align it.
This fixing is done very carefully.
You can see the part of the fixed glass.
They take the measurement from both sides and fix it in the proper position.
Now, let's fix it on the wall.
These are stainless steel fixtures.
They are threaded and bolted with screws.
Now, they are tightening the fixtures.
They drill holes in the tiles and fix the screws.
They are fixing it on the wall.
They are fixing the SS fixtures on the tiles.
They are threading the screws on the walls.
Now, they are aligning the vertical fixed part on the door.
They are fixing the small vertical part on the door.
They are taking the measurement and aligning it.
They are fixing it on both sides with the SS fixtures.
They are threading the screws and tightening it.
They are fixing it on both sides.
Now, they are fixing the glass on the SS pipe.
They are fixing it on both sides so that the glass does not move.
Now, they are fixing the glass on both sides with the SS pipe.
Now, they are fixing the glass on both sides with the SS pipe.
Now, they are fixing the hinges on the door.
They are fixing it on both sides with the SS pipe.
They are fixing it on both sides with the SS pipe.
They are fixing the door on both sides with the SS pipe.
Now, we will install the door side, the vertical side of the door will be installed on both the sides.
You can see the seal.
See, the side part of the door is also fixed with the seal.
You can see the knob of the door.
This is the knob of the S.S. so that the partition does not move too much.
This will also be used for the opening of the door.
See, the sealant is applied completely.
After this, the glass is cleaned from below and the surface is cleared.
So that the silicone can be filled in it.
After filling the silicone, it becomes airtight.
See, the door is being opened.
This is a silicone gun.
Silicone is filled with this gun.
It looks like a milky white now, but after drying, it looks like glass.
You won't notice much difference.
It looks like glass.
All its areas are airtight by applying silicone.
You can see the wall.
It is applied from both sides.
From the inside of the partition and from the outside of the partition.
You can see the wall.
It is being applied here as well.
After applying the silicone, this bathroom will not be used for a day.
No water is to be added.
You can use the bathroom the next day after it is airtight.
See, it is being applied on the bottom line as well.
Due to filling the silicone, it will become airtight and the water inside will not come out.
It will run in the nanny trap.
The silicone is filled from both sides.
Now the partition is ready.
You can see.
The door is being applied.
Close the door.
See, the door will open from inside.
In this way, the glass partition of the bathroom is made.
This is a practical video.
So friends, this is our today's video.
How did you like our today's video?
Do comment.
If you are watching my channel for the first time, then do subscribe to my channel.
And press the bell icon on the side.
So that you can get the notification of all my upcoming videos.
Thank you.