Lecture 59_Applications of Ecell

IIT Roorkee July 201
61 followers
1 Video View·Dec 4, 2023
Environmental Chemistry,
Prof. Bhanu Prakash Vellanki,
Civil Engg. Dept.
IIT Roorkee
[Music]
[Music]
[Applause]
[Music]
[Applause]
[Music]
hello everyone
so again welcome back to the latest
lecture session right
so in the last session we were
discussing the approaches relevant to
using the redox potential right the
reduction potential e h
right and we discussed the relevant
aspects and the analogies
with respect to p e right and then we
discussed the reaction feasibility right
as in when would the e h
cell be ah positive right as an e h one
greater than e h two
only an e h cell is positive would the
delta g then be negative right
so for that to occur again e h one has
to be greater than e eh2
meaning that i believe what now
reduction needs to occur
at cell 1 right and oxidation will occur
at the
cell 2 reduction at cell 1 meaning
cathode right
at cell 1 and anode at
cell 2 right for the e cell to be
positive and thus the delta g
to be negative for the reaction to be
feasible and then we talked about
relevant aspect as in an imposed
potential so in with respect to impulse
potential there are two aspects that we
are going to look at i guess right so
let us say if there is a reaction that
is thermodynamically favorable right
but you still want to promote such a
thermodynamically favorable
reaction you can again impose ah
external potential to promote this
already favorable reaction
and the second case is let us say there
is a reaction thats not
thermodynamically favorable now right
a redox reaction that is not
thermodynamically favorable
so but you want to ah you know get it
through or you know
make that ah you know your ah
what do we say the redox reaction that
you want to go through let's say
right but that is not thermodynamically
favorable right so what are you going to
do now
so you are going to impose and ah what
you see external potential right
so that this particular ah cell
right now becomes a feasible ah feasible
enough for the electron transfer to take
place
without the imposed potential right you
know there would be no electron transfer
but because of the imposed or the
external potential that you are going to
apply
you know that is going to go through
that as in the redox process is going to
go through
so we are going to cover that aspect now
in this aspect though its important to
look at
right say the terminology or i should
say the terminology i guess the signs
that
are applied to this ah external voltage
i guess
and the reason being you know in your
applied voltage let us say right or the
external voltage that you are
potential that you are applying pardon
me so you have the positive terminal and
negative terminal depending upon
to which electrode you connect your
positive terminal right
you are going to have what do you say
promoting or
not promoting your current redox process
right so we are going to look at that
right
so here we have this cell
is going to be equal to delta e h naught
minus r t by n f
natural logarithm of q dash of the
overall reaction right this is something
that we have looked at
ah in the past right or in the previous
session pardon me
and that is also equal to e h 1 minus
e h 2 now right so when you apply an
ah what is sectional potential or when
we look at the applied
potential so e cell is going to be
written as
e h 1 minus e h 2
minus this applied potential right
but this particular standard
form of using this particular negative
term here
would be contingent upon your positive
terminal
right
being connected
to cell one now right
and the negative 1 would then obviously
be connected to
cell 2 i guess right as in what does
this mean
nato would be connected to cell 2 right
and positive would be connected to cell
1
and then this would be the relevant what
do we say symbols
or such that you need to use here with
the applied
voltage or potential and let us look at
what that is but we are going to
understand what this means what does
this mean now
when you are applying what do you say
positive to what we say the positive
terminal or connecting the positive
terminal to the
electrode at cell one that means you
want to promote
oxidation right at
cell one right and that would obviously
mean you would want to then promote
reduction
at cell 2. so when you are trying to
promote these conditions
right this particular
what we say equation applies and this is
the standard way to look at digest
so we are going to look at it in terms
of the cells that we have looked at let
us see
so electrochemical cell let us say cell
one and let us say this
right and you are going to have your
cell 2
and let us say this is the direction of
your flow of electrons currently now
right and
what does this mean now usually we have
the cathode here right so cathode here
but that would then be reduction so i
need to
reverse the flow of the electrons here
and this is the anode here
right anode here and this would be
oxidation
right and here i am going to erase that
here
as in the direction of flow of the
electrons let us say
if the e cell is positive as it is right
yes so you are going to have e
cell is equal to
e 1 minus e 2 right
and let us say this particular e cell is
positive here
so when it's positive you know that
you'll have reduction let's say at
cell 1 that means the cathode and
oxidation at
cell 2 which is the anode here in this
case let's see
and in this case obviously we did not
have any external potential applied now
so here we are now going to consider in
the second case let us say
when we apply a
external potential now so i am going to
use the term
of the symbol with respect to negative
and applied similar to what we
had here right so that means my positive
terminal now needs to be connected to
cell one let us see let us see what that
entails
yes so i have my electrode one here
or cell one and cell two
right and now i am going to put in my
external what do we say a voltage let us
say applied voltage here
and this is positive and this is the
negative ah
terminal and so that's the positive is
connected to cell 1
and negative is connected to cell 2 and
let me write that as let us say
cell 1 and cell 2
right so now you know what's going to be
promoted now right
so in general you know here the way you
applied this particular
terminal or the applied the voltage you
see that the electron flow
from the negative terminal to the cell 2
will be promoted
and also electron flow from cell 1 to
the positive terminal will be
promoted and the electron flow would be
within the what we say applied battery
let us say if i can look at that let us
say
will be from plus to minus and minus to
plus
outside here right so now what am i
promoting i am promoting the flow of
electrons from cell one to the positive
terminal
and again electrons from negative
terminal to
cell 2. so now if this e applied
right the magnitude of it let us say
is greater than the magnitude of u1
minus e2
right which in this case i am you know
assuming that is going to be
now the electron flow is going to be
reverse from this case right in the
earlier case we had
reduction at cell 1 but now as you see
here
the way we have considered the relevant
aspects and connected the relevant
terminals
we are going to have promotion of
oxidation
at cell 1 and reduction at
cell 2 right so now your particular cell
1 is going to be your anode
and your cell 2 is going to be equal to
your
is going to be your cathode right again
that is
understandable here again so again here
let us say if you
count it in reverse let's say if you for
example connected your
ah what do you say now native terminal
to your cell 1
and positive terminal to your cell 2
then this would have to be written as
or reapplied will have to be considered
as nature
that's ah you know transforming this
particular
what do we say variable to be overall
positive i guess right
so this sign or the symbol i guess is
remarkably important
and that's relevant to the negative
symbol is relevant to the positive
terminal being connected to cell 1 right
so that something that you need to
consider here so again we will now look
at the two aspects that we have
considered or talked about earlier
as in let us say there is already a
thermodynamically favorable
reaction let us say redox reaction and
you want to further promote that
so what are you going to do now you are
going to see to it that the e
applied here is going to be negative
here right so the e applied mean ah
being negative what does that mean now
that you are going to connect your
native terminal to your cell 1
and positive terminal to your cell two
in this particular example
right and let us say the second case
that is a reaction is thermodynamically
not favorable now
so we want to make that particular
reaction thermodynamically favorable
right so what you are going to do you
are going to
have an applied voltage or external
voltage right and how are you going to
have the
relevant what do we say ah variables or
setup such that this equation is going
to be
right you are going to see to it that
the e applied is positive right
e applied is positive and greater than
in magnitude
with respect to the difference of e h
one and e h two right
or its going to be the difference uh
what do we say
have the opposite sign of delta e h
right
and what do we say greater than the sum
of ah
pardon me greater than delta e h right
so let me just write that down
so the second case as in there is a
unfavorable reaction right similar to
the example we just looked at and you
want to make it
favorable i guess so how do you do that
you are going to see to it that
you know your e applied let us say
is first greater than in magnitude of
your
delta or let us say i will write it as e
one minus e h one minus e h two
right and also the symbol that the sign
is going to be the opposite of
opposite of e h 1
minus e h 2 right
and thats when i guess obviously you are
going to promote a redox reaction thats
what we say not favorable and for that
case obviously you need to apply higher
external voltage
and also look at obviously the relevant
connections and for that
your e applied needs to be a different
sign when compared to e h one
ah minus e h two right so i guess now we
are going to
go over and look at a particular example
right and look at let us say in which
case would a particular
what we say half reaction or set of two
half reactions ah
you know be favorable and let us say
when you apply an external voltage of a
certain
what we say value how is that going to
change
right so let us look at that now so will
have
oxygen at
1 bar let us say right keep in mind that
usually the partial pressure of o2 is
equal to 0.21 bar
and let us say the ph 7 in this example
ph
in this example we consider to be 7 let
us say and the relevant half reaction we
have is
oxygen gaseous plus ah
four h plus i guess right plus four
electrons
go to two h two
and then the reduction potential e h
naught standard reduction potential is
1.226 volts let's see
for this half reaction this is the data
that i have and we are also going to
look at a second electrode let us say
where
two h plus plus two electrons
right you can go to h2
and this obviously your reference or
standard hydrogen electrode right
so that is why obviously the reference
its obviously set as one e h naught
is equal to zero and for let us say for
certain set of conditions we are going
to calculate the e h values for both
these
cases and here 2 will consider that h 2
is at 1 bar
i guess right and let us go ahead and
calculate e h 1 let us say
so e h one is going to be equal to
e h one naught minus again as we know r
t
by n f natural logarithm of q
dash right that is equal to h naught is
out here
one point two two six
minus rt by nf let us say here
n is the number of electrons being
transferred which is four right
so i guess the value of r t at twenty
five degree centigrade divided by the
faradays constant
is going to be equal to 0.02569
divided by the number of electrons is 4
into natural logarithm of q dash
q dash right so here you have activity
of 1
out here right because water activity is
1
divided by activity of or the partial
pressure of o 2
but in this example we are considering a
case when the oxygen is at one bar let
us see
so the partial pressure of o2 and that
is one so i am going to take that to be
one here right activity as you measured
by partial pressure of
o2 here and because the pressure is at
one that is going to be one here
and h plus concentration is 10 power
minus 7
right raised to the power of 4
right so that is why how we have e h 1
and that looks like turns out to be
0.812
volts right and similarly we are now
going to calculate e h
two so e h two is going to be equal to
e h two naught minus again r t by n f
and what is this value now zero point
zero two
five by the number of electrons being
transferred which in this case is 2
2 into natural logarithm of q dash again
so partial pressure of
h2 the gas again we assume that that is
going to be equal to
1 bar right so again it is 1 here
by activity of h plus h plus again
because it is at p h 7
it is going to be equal to 10 to the
power of minus 7 raised to the power of
2
and looks like with this value is going
to be equal to zero point
four one four volts right
so here let's just summarize what we
have you have e h one
right and that equal to zero point eight
one two volts
and e h two is going to be equal to
zero minus zero point four one four
volts right
so here as we see e h
one is greater than e h
two right so what does that imply now
you are going to have reduction
right reduction
at electrode one right or which is now
going to be equal to the equivalent to
the cathode right
and you are going to have oxidation
oxidation at two or anode
right and let us see what this e cell is
going to turn out to be you so e
cell is going to be equal to e h 1 minus
e h 2 right and the values being
0.812 and 0.812
minus of minus 0.414
right and that is equal to one point two
two six volts right so again e cell
is positive right and that's positive
and as we saw now
reduction at one and oxidation at two
right so what does that mean now so o2
plus let us say the balanced half
reaction two h2
should go to h2o right this is
nothing but from balancing these two off
reactions so we have this
going through as reduction as it is
right and then this
needs to be oxidation so we need to swap
this particular half reaction
and then multiplying it by two so that
the number of electron transfer is same
or let me write that down here so o2
plus
four h plus plus four electrons right
goes to two h two o
two h two o right and the second one i
guess
is two h plus plus two electrons
goes to h2 right and the gas is here
and gas is here right do we have the
right equations
i guess so and now obviously
if this proceeds as reduction this
reaction will stay as it is if this
proceeds as oxidation
we need to swap it i guess right so and
then ah
if you look at that overall reaction
right what is it going to be equal to o
two plus
four h plus plus four electrons
goes to two h2o right
and i am going to swap this and multiply
it by two so two h two
again gas and gas
right i will go to four h plus plus
four electrons right and that is going
to be nothing but equal to
o2 gas plus 2h2
gas is going to ah what do we say or you
can think of
it as obviously oxygen oxidizing
hydrogen or hydrogen reducing oxygen
right one in the same
and forming water right so that is what
we end up having here right
and this was the is the case ah that we
see out there now right
so now let us say we are going to
consider the case lets say if we want to
lets say
promote the dissociation of water into
hydrogen gas and oxygen lets say right
if i want to
form hydrogen gas lets say so what do i
do now i need to apply
what do we say ah external voltage right
or look at applied potential here
that now needs to be greater than
magnitude of 1.226 right
and also ah what it should also be in
the
opposite side now let us see what that
is i guess right
so here let us say we are going to have
applied potential greater than 1.226
let us choose let us say 1.5 volts to be
our
e applied right and now how do we apply
this we want to see to that
we promote oxidation at one
right and what does that mean i am going
to connect the positive terminal
right positive terminal
to cell 1 right
so then i can write the new e cell as e
cell
dash is equal to e h 1 minus e h 2
minus e applied right and now that is
again going to be equal to obviously
0.812
minus 0.414
right and what do we have that here
minus 1.5 right
and so that is now going to be equal to
minus 0.274
right so what do we see now volts so
after applying this
external what we say potential right
we now have or we are going to favor the
opposite reaction let us say
so now it is going to be two h2o
dissociating to form
oxygen in the gaseous phase and
hydrogen right again how did we go about
that because we applied an external
voltage
that's greater in magnitude than delta
e h i guess right which is 1.5 volts and
i guess after applying this particular
external voltage now the water is
unstable
and then it would now dissociate into
the relevant what we see compounds
and obviously now at what we say cell 1
you are going to have ah now oxidation
right
meaning anode cell one would act as
electrode one would be the anode
and electrode two will now be the
cathode right again
just a minor what do we say reworking
based on the relevant
applied potential i guess right so now
we will move on to the
next aspect it is going to be the orp
measurement sizes right
so these are the oxidation
reduction potential
measurements right so here out there let
us say you know you have commercial
available
orp meters now oxidation reduction
potential or p meters
so what will they uh you know ah help
you with let us say right
so you again this will have a standard
electrode or either
standard hydrogen electrode or the
submerged kalman electrode or reference
electrode right
and again it is going to measure the
potential difference between the
standard hydrogen electrode or the
standard or the reference electrode
so with this what we going to work you
are going to have a reference electrode
right your standard electrode
and its going to measure the potential
difference versus a non reactive
electrode let us say a platinum
electrode let us say
right and then let us say it is going to
be able to give you the potential
difference
between based upon the situation in the
water right
is it more reduced more oxidized or such
and based on that you can approximate
your
what do we say e h or p e of your
solution now
so in effect or p the or p ah meter will
give you an idea about
the p e or the e h of your
solution now right so in general it will
help you understand now is it well to
the more oxidizing conditions that
prevail
or relatively more reducing conditions
that prevail in your particular solution
now
and based upon that obviously you can ah
you know tailor
that to your needs now right but you
know people think of this
orp measurement as a panicking for ah
that will give you all the information
that you need but
there are obviously disadvantages in
such generalizations just look at let us
look at what they are now
so keep in mind that orp reading looks
at the solution
so it is not specific
not specific let us say
to any particular redox couple now right
so there can be multiple redox couples
in the solution
obviously right so the the warping meter
or this
measurement will not look at any
particular what do we say redox couple
it is going to be the cumulative one
right
or the p e that is existing in the
solution now right so that is one
particular aspect
and again the key is that as you know
redox disequilibrium
usually what is what predominates so if
redox disequilibrium predominates what
does that mean now let us say
you are still you can still have redox
process that are going through
and let us say the p can change too
right you know you do not have your or
the system is not at
equilibrium so possible that your system
is not at
at equilibrium right so combined with
this
what is it that we can glean or cannot
glean now so while you can understand
if the solution currently has oxidizing
conditions or reducing conditions
because the warp reading is not specific
to any couple
and is also not what do we say going to
ah
tell you if the system is at equilibrium
or not let us say right or because you
do not know that the kinetics can be
slower right
so what does it mean now it cannot give
any idea about
about the speciation lets see
of various redox couples present in it
present in the solution
right so this is an important aspect
though so while the orp
will give a generic idea it will
obviously not what we say provide you
with the relevant information to be able
to
understand the speciation of the
relevant couples in the solution now
right
so this is one other aspect and now we
are now going to move on to another
what do we say practical aspect with
respect to redox process so this is with
respect to corrosion that you would see
out there let us say right
so corrosion again what is that now you
we can understand that again in terms of
an electrochemical cell let us see
right so we are going to look at that
now
right and we can understand it in terms
of
an electrochemical cell right
as in what do we have in an
electrochemical cell obviously we have a
cathode
right where we have the reduction taking
place
we have an anode right where we have the
oxidation taking place
right and obviously what else do we need
we need an external circuit
external circuit bridging the gap
between or bridging
acting as a bridge between the anode and
the cathode right so external circuit
now so in general ah you know when we
talk about
ah what do we say corrosion of metals so
for example lets say
f e iron in its zero valent zero
valentine let us say
oxidizing to f e two plus lets say right
so here
anode is your ah metal lets see
or the surface of the metal is your
anode
right where the corrosion takes place
yes and cathode obviously you know
depends upon
what is the electron acceptor out there
right so we are going to look at those
aspects so again for corrosion to take
place obviously you need your metal
surface right which acts as the anode
right where you have what we say the
release of the electrons or oxidation
and obviously you need a cathode which
would accept or you know a place where
or
surface where or an electron acceptor i
guess
yes electrode where we accept it accepts
the electron
or the relevant reactions there and then
obviously you need an external circuit
now
so any of these three aspects if they
miss i guess
obviously the corrosion wouldn't go
through so we are going to look at what
we see a couple of
ways ah to that corrosion goes through
and then look at how we can
control corrosion based on what we based
on the knowledge that we have i guess so
in general there are two aspects again
ah one would be with respect to when we
have dissimilar metals
being in contact so that is one aspect
we are going to look at
and obviously the other aspect is when
let us say your metal
is what do we say in contact with the
usual electron acceptors out there and
the most usual one obviously is your
oxygen and that is the one we usually
see out there but for industrial
applications are such even when we have
dissimilar metals that is a remarkably
important issue
i mean dissimilar metals in contact with
each other so we are going to look at
these two
sets of examples i guess so the first
set obviously is going to be the one
when dissimilar metals
are in contact right
and so we are going to have an example
here so its going to be
one with iron fe two plus plus two
electrons
right and fe naught
and looks like the p naught value for
this particular
half reaction is minus seven point five
five and let's also consider another
half reaction
dissimilar letter let us say copper cu 2
plus plus 2 electrons right
goes to cu
and this particular p naught
is equal to 5.74 right
so again here we have the p naught
values for two
half reactions and let us assume a case
when let us say the fe 2 plus and c 2
plus c u 2 plus concentrations are equal
to
our activities are equal to 10 power
minus 3 and work out the relevant p
values and then compare them and see
which metal will be oxidized
or which metal will be corroded i guess
right so let us look at that
so assuming that all the activities are
equal to ten power
minus three so the p e one right
is going to be equal to p naught minus
seven point
five five minus one by n
right and log of
what is activity of this particular what
we say metal right
pure metal so it is going to be equal to
1 let us say
and by 10 power minus 3
right and that is going to be equal to 1
by n as an n
is 2 so that is going to be equal to 10
power minus 3
and 1.5 and that is 1.5
that is equal to minus 9.05
right and then the p 2 is going to be
equal to
5.74 p naught right
minus 1 by n is again 1 by 2 and
times log of activity of 1 again because
c naught
pure metal right by ten power minus
three
right so again one point ah five
four point five point seven four minus
one point five so its four point
two four right so from here you see that
p 2 is greater than p
1 right p e 2 is greater than p
e 1 right so what does this mean now so
it means that 2 will
proceed as reduction
and one as oxidation
right so what does this mean now when
the copper
and iron are in contact with each other
you know
one is oxidation thus iron
will corrode right
does iron well corrode yes so obviously
when you want to control such
what do we say corrosion due to
ah contact between two dissimilar metals
let us say so what can you do now right
so you can have an insulation material
between these two
ah dissimilar metals so what are you
trying to achieve there
so this insulation means you are cutting
down on that
external circuit right so here we
when we are trying to control corrosion
we look at the three aspects anode
cathode and
the external circuit so when you have
dissimilar metals in contact with each
other you can have
insulating material between each other
as in you are preventing the
contact between them and thus the
transfer of electrons and thus
there is not going to be any redox
process going through thus
there is not going to be any corrosion
of your particular metal right
or you can also have a sacrificial anode
let me just twist that i guess
so how can i control it one would be
insulation i guess right insulating
material
and the other would be a sacrificial
anode
so you will choose let us say another
metal lets say whose
so its something like p e two right
greater than
lets say p e three lets see right you
will choose some other metal
and that will act as your sacrificial
anode thus protecting your particular ah
metal which is iron let us say that you
want to see to it that it does not
corrode i guess right
so you are going to provide a
sacrificial anode
rather than iron acting as your metal
surface of iron acting as your
anode right so that is one particular
case or
you can also people do that rarely i
guess in the industries anyway you can
have an applied potential
right if you have the applied potential
let us say you can see to it that the
it is not thermodynamically favorable
for this particular not
thermodynamically favorable i guess
so this thermodynamically favorable
reaction does not go through
because you are applying a external what
we say potential i guess
so this is one particular way to go
about it so obviously we are also going
to look at the second type of
corrosion right so when you have a metal
in contact with a soluble
oxidant now right
so when we have the metal in contact
with soluble oxidants such as
let us say o2 chlorine hocl
right and cro42 minus lets say
right ah then again we can have
corrosion so obviously again we can look
at what do we see the relevant p
values calculating them and so on and go
through but obviously from your
background you know that let us say o
two
is an oxidizing agent it is an electron
acceptor and again c l two and h o c l
here pardon me
right they are again oxidizing agents
right so what does that mean now
that their p value will be relatively
high right compared to most
the p values of the relevant half
reactions
relevant to any other metals out there
let us see so in that case
obviously what would you observe now the
p one being greater than p e two right
so you will have oxidation of your
particular metal so how can you what do
we say
ah see to it that you control such type
of ah what do we say
ah corrosion now right so when you have
these
oxygen let us say dissolved in water ah
let us say thats in contact with your
particular
metal now right so that is the reason
why we paint it right again thats an
insulating material we again paint it
right
so that we are looking at you know ah
cutting down that external circuit
which allows for the transfer of
electrons from one half reaction to the
other right so that is the reason we
paint metals lets say right
or let us say you know you can also see
to it that let us say
obviously depending on the type of metal
an initial layer of
corrosion leads to formation of again
metal oxides let us say
and these metal oxides on the surface
are again remarkably resistant to any
other what do we say
ah chemical process or transformation
and they themselves act as an insulating
layer let us say
or lastly again you can promote
formation of let us say
an insulating layer in this case i
believe we looked at one particular
example in our acid base relevant
chemical process right
as in we see to it that you know you
have a layer of
caco3 let us say that would precipitate
in your distribution network right
so that would promote let us say or not
promote pardon me that will see to it
that your
what we say the distribution network or
the pipeline let us say
is not corroded why is it because you
have a thin line of your precipitation
on your ah metal here right so in such
ways you can go ahead and
what we say control your relevant ah
corrosion here
again two aspects ah more or less we are
looking at
ah cutting down or you know breaking
that external circuit which acts as the
conductor for electrons from one half
reaction to the other and thats
again based on the relevant aspects we
have looked at here right
so again with that i guess we are more
or less done with today's session
and we are going to wrap up the class in
next session so in the next session i
guess we are going to look at a holistic
approach right
so thus far we have looked at
equilibrium and kinetics
and then looked at the major aspects as
in acid base
complex formation and precipitation and
dissolution
and again we looked at redox process and
then as we
went through the redox process we also
looked at examples
that you know gave us a holistic idea
now right as in
what would the situation be if you
looked at the theoretical aspect of just
the redox process
and then as we approach the true
situation that we would expect out there
in the nature as in
redox in conjunction with precipitation
and complex formation
we saw how the system changes and why
the relevant background is necessary in
our particular
chemical process right and also
throughout the class especially i guess
with respect to let us say
complex formation let us say our
precipitation we looked at let us say
even in such simple aspects
as coagulation and flocculation why such
background is necessary as and is it
charge neutralization that's relevant to
your particular coagulation and
flocculation
or is it sweep ah precipitation or co
precipitation now right or sweep
flocculation or co
precipitation now again depending on
that you need to choose your relevant
coagulant right fe two plus or fe three
plus and so on and so forth right so
again in the next class we are going to
look at it
holistically again just a brief review
of what we have been up to
and i guess then we will wrap up this
course
and that's it for today and thank you
[Music]
[Applause]
[Music]
hey
[Music]
you
