IITK NPTEL Structural Geology_Lecture 28: Fractures & Joints II [Prof. Santanu Misra]

IIT Kanpur July 201
20 followers
2 Video Views·Dec 2, 2023
Hello everyone, welcome back again to this online NPTEL Structural Geology course.
And today we are in our lecture number 28 and we are learning Fractures and Joints and
we are in the part 2 of this lecture.
And today we will mostly learn joint systems and their orientations, anatomy of a joint
and mechanics of joint formation.
So, most of the contents of this lecture I adopted from lecture note of Professor John
Pierre Bourg.
So, you can also go there and see further of about this topic that we are going to cover
today.
At the link of this Professor Bourg's lecture notes were given at the very beginning of
this lecture.
So, yeah we will define the joints again in a different way.
So, joints are mostly mode 1 fractures and these are planes of separation on which no
or sort of very negligible undetectable shear displacements has taken place.
And the 2 walls of the joints generally they maintain a very tiny opening and the opening
is known as aperture and they typically remain in tight or in matching contact.
Now, joints form due to of course, we learnt it that you need some sort of stresses.
So, it can happen due to a regional tectonics.
So, you can consider the compressive stresses in the front of a mountain belt and so on.
Folding, so due to curvature of the bedding or any foliation plane or layers.
Faulting also causes joints or internal stress release during uplift or cooling.
So, all these are possible reasons for formation of the joints.
They often form under high fluid pressure sometimes.
So, that is the low effective stress when you have in your system, the porosity is there
and the pores are filled by some fluids and these generally perpendicular to the smallest
principal stress.
So, this is how the joints do occur in the system and this is how we can actually identify
or we can have an idea once we know the orientation of the joints what was the orientation of
the stress axis.
The growth of the joint, so once the joint forms then it grows.
The growth of the joints is controlled mostly by the thickness of the deforming rock.
The apertures can be open resulting in permeability enhancement.
So, if you open the apertures that means you are adding more porosity to the system and
sometimes you can close these apertures with some deposits, the vein filling deposits,
so that results the permeability reduction.
Now when you have a joint with pretty large aperture, so greater than few millimeters
then we call it a fissure.
Joints have a very important role in some sort of exploration geology.
Now you can imagine that you have significant number of joints in a system in a rock and
then they have a little bit of opening, so apertures are quite high they are like fissures
and then they provide you adequate porosity and permeability.
And therefore, the jointed rocks in apparently the rock type may be is very intact say for
example granite and so on can act as a very productive fractured reservoir.
So therefore, joints are important and we need to understand few of its basic characteristics
and that is the aim of this lecture.
So joints are mostly form in terms of families, so they have their sets and these sets could
be straight or curvy planar fractures typically perpendicular to the layer boundaries in the
sedimentary rocks.
Now what we see here in this illustration that we have two different sets.
So one set is like this and another set is like this, so this one is set 1 and this one
is set 2.
They mostly form one after another, so a set is a group of joints with similar orientation
and morphology.
Now several sets usually occur at the same place with no apparent interaction giving
exposures a blocky or fragmented appearance as you can see here we will see some photographs
soon.
So you see this rhombic is can be squarish as well, so this fragmented appearances if
you see in the field that means this rock is jointed.
Now two or more sets of joints present together in an exposure they compose generally a joint
system and in the joint system you can figure out the spacing between the joints.
So for example this is spacing between set 2, you can also figure out the angles between
the joints and these are also sometimes important for structural analysis provided they form
in a same time.
So here is one example the first one you see that it is predominantly one set of joints
which are this one.
So all these are joints in this rock, it has another set of joint which is running something
like that but that is not dominant as this set is.
However the second image you can see as I was talking about this blocky nature.
So you have one set of joints going like this and another set of joints almost perpendicular
to this giving rise this little blocks.
So this is how you interpret or you see the set of joints in the field.
Now not necessarily you always have parallel sets of joints, so they can be in a different
way we will see this image again but you see there is no apparent parallelism of the joint
sets.
So maybe this sets a little bit of parallel to each other but then they terminate with
another joint and so on.
So these we call something which we learn later in the next slide.
Now one set of joints you can think that this could be bedding contained joints, so that
terminates at the top and bottom of the beds.
What I mean by that these are your traces of the bedding planes on a surface and if
the joints do form then you may have joints only confined in one set and then you may
have joints confined in the other bed like this.
We will learn soon about what would be the characteristics of the spacings and so on
whether this they would be similar spacing or a different spacing and so on.
But the point here with the bedding contained joints is that that this joint did not propagate
through this interface between the two beds and so on.
If that happens then we call it bedding contained joints.
Systematic joints are characterized by a roughly planar geometry.
They have relatively long traces and typically form sets of approximately parallel and almost
equally spaced joints.
Exactly what we have seen in one of the first illustrations that you have one set like this
and then you develop a second set of joints like this.
So individual sets are mostly parallel to each other and then they develop this mostly
equidimensional blocky shapes and when it is not systematic, non-systematic joints are
usually short curved and irregularly spaced.
They usually terminate against systematic joints.
So in a similar way you can consider that if you have joints like this and then second
set of joints maybe they may originate in a different way not necessarily they are parallel
to each other.
So, they terminate at each places they may continue but stop somewhere and so on.
So these are the processes of non-systematic joints and here is again the photograph I
added it here again just to give you an idea.
So for example, here you can see that you have this set which is more or less parallel
to the set we have seen here but we generated another set that terminated here at this junction
it did not propagate in this side.
So these are non-systematic joints.
Now spacing of the joints as we are talking about that what controls the spacing the size
and spacing.
So that means the average orthogonal distance between neighboring fracture planes are essential
characteristics of joint sets.
In isotropic rocks for example you can consider granites joint spacing follows an approximately
log normal frequency the number of joints occurring within a unit length.
So in anisotropic layered rocks joint spacing differs according to the several parameters
and these parameters mostly controlled by bed thickness, lithology and structural position
along with the strain.
Bed thickness we will see soon lithology as well structural position means that where
the joint is forming.
In other words if I have a folded layer like this then the orientation of joints or spacing
of the joints at the hinge zone would be essentially different from those of the limb zone and
so on.
And if this fold is also in this case this is a cylindrical fold if the fold is non-cylindrical
then also you may expect a different types of joints and also variable spacings.
The strain is of course how the magnitude of the strain influence the joint patterns
and I tell you they do it.
It is also important to understand at this point that the rate of strain or rate of deformation
also influences the pattern the size and the spacing of the joints we will see in one illustration
soon on this as well.
So here is an example that if you have weak layers then the spacing of the joints is pretty
wide.
If you have stiff layers then the joints are very much concentrated that means the spacing
is much less and if you have weak layer so this is very weak layer and if you have weaker
layer then you see spacings in between stiff layer and very weak layer.
This is another example that is showing that the plot bed thickness versus space between
the fracture.
So that means how lithology is controlling the spacing of the joints.
So this one is for grey wacke, this one is for grey wacke which has inter layers greater
than 5 centimeters and this is grey wacke inter layers less than 5 centimeters and you
can clearly see the space between the fractures with the same composition.
But if the layers are thinner then spaces between the fractures are also less.
In this case if the layers are thicker in the spaces also do increase and similarly
the grey wacke if you have this way and in limestone it varies in different ways.
So these grey wacke and these grey wacke they are different with some in terms of
their grain size and so on.
So you also see the grain size also do play a role in determining the spacings between
the joints or fractures in rocks.
So here is an example a photograph you see that clearly understand that this little whitish
layers here these are competent because these are whitish and they are most likely sand
rich layers and these are sand poor layers.
So these are sand rich, sand rich and these are sand poor.
We clearly see that within the sand rich layers we have more joints here, here.
But this particular layer if I consider you see some of the joints pass through this but
this one no, this one passed through this but all these two joints they did not pass
through this.
So this is almost free of joints from here to here if I consider this space but the space
just below and just above because these are sand rich layers you see number of joints
are very high within the same area that we are looking at.
So this tells you that the spacing of the joints is essentially controlled by the lithology
of the rock.
Now patterns of the joints they you can actually see many different types of joints.
So joint sets that means their relationships with the other joint or neighboring joint
planes with another.
So far we have seen that most of the joints are parallel like this or sometimes they have
an angular relationship.
So these are parallel sets and this could be curved or straight.
Then fans set so joints can radiate like this.
Then radiating sets around an inclusion center and this happens when you have you particularly
see this kind of joints this radiating joints in pillow lavas.
So when the pillow lava cools then it generates radiating joints like this.
Then concentric sets around intrusions and collapse centers.
So this concentric set generally when it see the exfoliations and something like that then
these are concentric set of joints.
And then polygonal sets as columnar or prismatic joints mostly seen in the basaltic rocks and
known as columnar joints we will learn about it also in one of the slides.
So here is an illustration that shows that what are the different features that you expect
in a joint surface.
So joints normally are barren cracks.
So you will see just a cracked surface but with lot of interesting features.
So or it could be an empty fissure but some may contain coatings.
Narrow veins with infilling minerals commonly quartz or calcite are also extension fractures
and you can treat them as joints but let us concentrate on this image.
So what we see here this plane where you have all these illustrations this plane is your
joint surface.
So it happened this way and this is another trace of the joint surface this is the joint
tip and this is another surface you can see the joint is exposed.
We will learn about it so the joint originated from here and then it propagated in this direction.
So the fracture plane originated here and then it propagated radially this way in all
this direction with the major growth direction in this and this is known as plume axis.
Now the joint surface is characterized by a feather like marks which you see here let
me clean this and these feather like features generally do originate from the origin from
where the joint started and these are known as plumose marks.
You can also see around this origin some radiating half circles or half ellipses like this.
These are known as rib marks and rib marks are generally characterized by some sort of
steps and these steps are known as ramp rib mark.
On the outer side of the joint where it intersects with the opening faces of the rocks you see
the fringe face.
So these look like this and in this case these are also some sort of small scale plumose
mark and these do happen by a step and these are known as fringe steps.
So these are also known as plumose marks and so on these are also known as hackle marks
and we will in the next slide we will talk about mostly on the plumose marks.
So plumose structures are aggregates of gentle curvilinear undulations and known as also
hackle marks as I just told in the previous slide that radiate from the point where the
joint originated and fan outward form a generally straight more rarely curved axial line.
So this line you see here it is very much straight.
However in few cases we may see that this can be curved, but this is very rare and then
it resembles a shape and imprint of a feather.
So sometimes you may mistake it by considering that this is a fossil of a feather or something
like that, but it is not.
The origin of the plumose commonly is that some rock heterogeneity you can consider them
as ripple on bedding planes or inclusions.
So this could be a concretion, nodule, clast, fossils etcetera in the beds.
The hackles are often very fine near the joint origin while the differential relief may amplify
lengthwise towards the joint margin towards the fringe we will see the example very soon.
Now hackle diverge sharply at angles about 30 degrees from the central axis and gradually
this angle increases.
So it curving to angles of about 70 degrees near the margins of the joint surface.
Now this plumose marks and the rib marks these are also important in terms of or in correlating
the stress versus the fracture velocity.
So I have stress axis in this side and fracture velocity in log scale in this side.
At low stress if the propagation velocity is relatively fast then we see this radiating
rib marks, but we hardly see any plumose marks as it is represented here with this illustration.
If the velocity is more or less constant or very slow, but stress is intermediate then
we see some sort of radiating rib marks and also plumose marks and these are known as
transitional markings.
But if the fracture velocity is very high and also the stress then we see features like
this so we see plumes and fringes the rib marks are absolutely absent in this kind of
tectonic settings.
Now rib marks they do form a series of regular concentric and arcuate changes or ramps in
the orientation of the joint surface giving some sort of caspate waveforms or rounded
ridge or furrows.
The central zone of rib marks or you can call the mirror is often circular or elliptical.
Now there is another terminology that is Wallner lines and these are similar to the ribs, but
they occur at one or two sets oblique to the hackles.
Now what we see here we will see fantastic images of plumose marks in the next slide,
but you see probably the plumose marks like this here and these are your rib marks.
So this is a jointed surface and these things are your rib marks.
Now do not focus on these planes these are most likely the marks of the water.
So these this has nothing to do with the structural geology or tectonics, but these are rib marks
in this joint surface.
Now not necessarily you see both rib marks and plumose marks at the same time.
So here for an example that you can figure out that joint originated from here and then
your plumose marks are going like this and just drawing this or looking at it even you
can see in the next surface you can clearly figure out that the joint propagated from
this side to this direction.
Now this does not have any rib mark, but in this case again you can figure out that it
probably originated somewhere here and then it is going like this.
It is a feather like feature and in this case this plume line is little bit curved and these
are your rib marks and these are the steps as you can see here they appear something
like this.
So this is how if you see this kind of features in the field first you identify that this
is essentially a jointed surface and when you are convinced that this is a jointed surface
then you try to figure out that what was the propagation direction of the joint and then
you also try to see whether it has rib marks and other features or not.
Now the mechanics of the joints are also very important.
So we mostly talked about it and we know that most of the joints are generally mode 1 fracture.
So extensional or dilational, but there are deviations.
So a generic classification of joints has been based on the size of inferred imperceptible
displacement related to the three principle stress axis of a region.
Now if the total displacement is normal to the fracture surface it is an extension or
dilatant joint or mode 1 fracture as we are talking about.
If the shear component has some finite, but very very negligible value then the fracture
is called shear joint.
So we can have extensional joints and we can have shear joints.
These definitions are or classifications are essentially restricted to the point when
joints just have formed.
Now an extensional or dilational joint or a shear joint at later stage of the deformation
can eventually produce a fault and so on.
But this is exactly what we are not going to look at right now.
So there are some common joints I am just reading their names and their characteristics
that we generally find in the textbooks or sometimes in the class lectures or in the
field.
The field in the structure says that this is this kind of joints and you can also figure
it out by yourself after this lecture I believe.
Now I just giving here only four names, but there are many other names, but these fours
are the mostly a common used terminologies related to identifying joints in the field.
One is sheet or exfoliation joints mostly seen in the granitic rocks.
So these are dilatant joints formed during erosion or homogeneous rocks such as granite
are sub parallel to the topography and this orientation results in set of flat lying curved
and large joints referred to as sheeting or sheet structure.
Now if you go to the field and see a granitic exposure, you must have seen that it is like
exfoliating, so it is like onion.
So some curved joints appeared, they are going out, they are falling apart.
So this is a process of weathering and these are essentially termed as sheet joints.
Now you can have bedding parallel and bedding contained joints.
So far we have seen bedding contained joints which are perpendicular to the bedding planes,
but you can also generate bedding parallel joints and both of them can happen during
the decompression.
So horizontal dilatant joints may form bedding parallel joints due to unloading or decompression
and these decompression joints can also form as I was talking about vertically and commonly
about against layer boundaries and dissect layered rocks in blocky elements.
We have learnt about stylolites in one of the previous lectures when you are talking
about the diffusion creeps.
So stylolites are actually kind of joints and stylolitic joints have a characteristic
saw tooth profile.
So in other joints it is more or less straight, flat, the surface is characterized except
the plumose related undulations or rib related undulations.
But stylolitic joints are essentially different because these are amalgamated, there is no
opening or shearing, but compaction is working there.
So styloliting joints therefore have a characteristic saw tooth profile and inter digitizing cone
like form in these dimensions and the mechanism is pressure solutions.
We have learnt about it in one of the previous lectures.
And finally the most spectacular joints are columnar joints, you are seeing this in the
background and columnar joints are most prominent in basaltic seals and lava flows.
So they form a 3 dimensional network of interconnected fractures that dissect the rock in long and
spectacular polygonal units commonly 5 or 6 sided columns.
So columnar joints are very spectacular if you see them you are lucky, but we see in
India if you travel to Lakhadip and so on there you see this columnar joints spectacularly.
So with this note I finish this lecture, this is a relatively shorter lecture, but
you will be having a long lecture on faults and faulting and there we will mostly look
at geometry and mechanisms of these 2 terminologies or these 2 very very important structures
of structural geology and also in geology faults and faulting is the topic for the next
lecture.
Thank you very much, have a nice time, I will see you in the next lecture.
