IITK NPTEL Structural Geology_LAB 13: Geological Cross Section [Prof. Santanu Misra]

IIT Kanpur July 201
20 followers
Dec 3, 2023
Hello all, welcome to online NPTEL structural geology course, in this lab session we will
learn how to draw a cross section from a geological map.
So this a geological map in which we have four sedimentary units, silt stones, shells,
sand stone and dolomite, this is silt stone, this is shell, this grey one is sand stone
and this circular one is dolomite.
So in this, this dip of a litho context is given and this is the true dip so this present
the strip and now we will draw a cross section along A and A , perpendicular to the strike
of the bed.
If we make section other than the perpendicular to the strike, then we have to calculate the
apparent dip along that section.
Suppose if we will want to draw a cross section diagonally suppose from this end to this end,
then along this section we will, we will determine the apparent dip of each context and then
draw a cross section, for this session we will construct a cross section perpendicular
to this strike.
So we will use the true dip for that purpose.
So first what we will do, we will, we will turn the paper and then and then, we will
take a sheet, put this map on the this sheet and mark A and A
and we will also mark the context of the either units.
We will draw a line through this point and this end represent the A and this one will
represent the A dash and we know the dip of the context, so we will use the protector
and draw a dip, before that we will draw a one line, so this context represent 50 degree,
so I will draw 50 degree and it is dipping towards west so I will come 50 degree, so
this is 10, 20, 30, 40, this is 50.
Then I will draw a dotted line form this point.
The same way I will draw the dip of each context subsequently and other one is 55, so this
is 50, this is 55 and now this context, the dip of this context is 50 degree, but it is
dipping to the other which we have drawn.
So it is dipping towards east, so I will draw 50 degree, dip 50 degree from the east, so
this is fifty degree, this is 48 degree, then 45 degree then again it is dipping to the
west.
So I will take 60 degree, this is 60 degree and 58 degree, then 54 degree then 40 degree
dipping towards east.
So from the map what we see that some bed are dipping towards east and some beds are
dipping towards west, so after constructing the dip, what we see that they are intersecting
so which means that the beds are folded.
So now what we will do we will try to smooth this and make a fold, so this is dipping 60
degree and this is dipping 45 degree and the same bed when they are dipping opposite so
they make same fold.
So now I will construct, so this is the complete section of this map when we see along A and
A , means the cross section the in-depth view of the map.
So we will try to fill it with these legends so we know that this is silt stone and this
one is sand stone so this is grey in colour and this one is dolomite, so from the map
we see that this one is here and this one is sand stone, so this grey one, this one
is dolomite, this one, this one is again sand stone, so for this one, this and this one
is shell, this one is silt stone, again this shell again sand stone and then dolomite and
in the end we again see this one is sand stone.
So in then cross section it will look as it is folded and if we want to visualise this
section before erosion we have to deconstruct above the section line A, A by connecting
the corresponding litho boundaries
and after connecting the litho boundaries we see that the first fold nearer to A in
this section line is anti firm and the fold in the middle is sin form and the fold nearer
to the A is again anti firm.
And if we see the map, we can see that the litho boundaries between then dolomite and
the sandstone is dipping to the west, if we move from A to A again they contact between
the dolomite and the sandstone is dipping to the east.
So these two litho boundaries is dipping away from each other which means that it represents
and anti firm while the boundaries between this silt stone and shell they are dipping
towards each other which means it is sin form and again this dolomite and dolomite and sandstone
contact is dipping away from each other which represents it is anti firm, so the fold axis
will pass through this.
So it represents this anti firm where the dolomite is exposed and here the silt stone
is exposed and again the dolomite is exposed.
If we fill this sandstone grey and this dolo this dolomite with this index and then it
will look like this, the complete pattern.
So this is the cross section of this geological map along A and A .
