WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
Hey guys, how you doing? It's Henry at mowers and blowers. Welcome to part 4 of my Toro wheelhorse
1438 HXL, but we have a 17.5 horsepower
Repowered engine that I built from a block that I got from Mickey
Tractor I got from Nick a lot of parts. I got from my other friends Dave mark
People that contribute to the channel as well as my neighbor Brian who gave me the crankshaft bolt
Which we will try to put on what we were missing from our last episode was that the belt?
I didn't have any belts that fit. So what did I do? I mean, I you know, you guys know
I don't usually buy anything I get everything for free
For free
That's right free, but I didn't have a belt. So what could I do? I had to go buy it off of eBay
So I found out from the parts diagram that this Toro wheelhorse takes a half inch by
87 and a half. It's hard to find a
87 and a half belt. I hope that it's not gonna be too much trouble
But I only got a half inch by 87 and this was nine dollars and sixty five cents
We tax and everything was like eleven and a half. So I got this in the mail today
We're gonna install this on the original crankshaft pulley double stack pulley that we put on there
we tried the bigger John Deere diameter one to try to fit the belt that I had but
We're gonna try to put the original on and see if it works
While we were waiting for the belt. I recharged the battery that I took out of blue Bayou. It's a
160 CC a battery that I got about a year ago from Advance Auto Parts
I've been charging it up and putting my battery analyzer on it after we charged it for like two three days
What does it say?
healthy 100% charge 100% good battery and it's right now rated at
274 CC a even though the battery is rated at 160 CC a so looks like this battery ought to work now
This stator does charge at 15 volts. So it's a little high to be honest with you
but
We'll see if it stays steady
so it is a gloomy rainy day, but
It's not raining right now. So let's see if it starts up or can choke it
new battery
Bulbs get brighter because it's off the stator
Some seems to be some smoke that's burning on the
muffler on top of it
so that means it could have a little bit of a
Oil leak on the valve cover gasket. Let me put my finger right underneath it. It's not the muffler. It's just a valve cover
And it's dry maybe it was just a little bit that needs to burn off. We'll see
Let's get that pulley on
There you go stop by itself you don't have to stand here waiting for it to get there
But first I want to show you what I got in the mail today from Cal Cal they make outdoor
hunting and outdoor boots
Waterproof boots for gardening
hunting just outdoorsy stuff camping hiking whatever you need it to be because I'm a
firearms guy I figured not that I go hunting but I
Like rugged boots when you go outdoors and also I like camouflage check this out
This is the camo gen 2 model
notice the curvature here where it matches with your
calf as opposed to a straight boot
Also, as you can see, it's got like a shin guard and a rear guard almost like motorcycle boots
You're going off-roading and
motocross
Has a pull-up thing
natural rubber
well ventilated
You could actually bend this down and fold it didn't want it so high
Check out the tread
It's like off-road tires for excellent grippage. It's a hundred percent waterproof
Or if you need to walk your dog and it's raining really bad out or you're having a hurricane and a flood
100% waterproof you can fully submerge these into a small creek or a lake or something like that
It keeps your feet dry
Rugged boots. They feel great feet are fully insulated from the weather
These are great boots to have check out this short clip from Cal Cal
Pretty cool, huh? I'll leave a link in the description if you guys are interested now back to the video. I've got my belt
Got the original pulley. We're gonna move the John Deere oversized
mower deck pulley
Opposite
It's because my impact wrench doesn't fit underneath unless I jack it up and move the deck. So it's paying balls
Hold the shaft of the double stack pulley this direction
Loosen the nut. That's how you get it off without having to use an impact or stick rope into the combustion chamber
And hold the piston. It's kind of dangerous could break your connecting rods, but that's how you move a pulley without an impact
All right, well I did it
Neighbor of mine. He always comes by and talks to me and stuff and I enjoy talking to him
you know kind of breaks the monotony of just being alone all the time in your
driveway fixing shit, you know
I always bring out the stuff to the driveway because it's better lighting for the video and also
My dog Boba is right at the window. So he won't feel like he's alone. I'm such a loser
But I mean, you know when you have a dog man
They become part of your family and you care about them like they're a member of the family, you know, and so
I'm a loser that way. But anyway, I don't know if you guys saw but in time-lapse
I could remove the belt that I put on and put on the new belt right the new belt
I did a comparison about how much longer this old one was and it was like it went like here
So it was considerable maybe three four inches too long. So that's why you know, it wouldn't work
Anyway, I put it on it was a pain in the ass because I had to re-put
Replace the keepers around the double stack pulley and getting it over the keepers on the tension pulley was a pain in the ass
And it was so tight with those black covers over the spindle pulleys
And yet they're just like, you know, I don't want to take them off, you know too much trouble
I just wanted to weasel them into the pulley. Anyway, anyway, I
Think I got it going on. So what?
So it's not engaged
Everything works
When I put this down
It rubs on this valance over there. So
Because it's not the original engine, I guess it's a little lower the older style maybe by half an inch or something like that
So maybe I should take the valance off. You know what I mean by the valance so it clips onto here
But it rubs onto the thing. So but then it wouldn't clip if I did remove it
Maybe I should just cut off a little bit of them down
It appears that still smoking at the muffler
so I figured there's some kind of oil drip onto the muffler and also when you're
Stopped right? It still wants to lurch backwards a little so this foot pedal needs to be adjusted
so that it
Right in the middle, you know right now. It feels like it's it goes that way so I have to look into that but
That's fantastic. So far. I've only spent nine dollars and sixty five cents on the belt
Tractor was free engine was free parts. I got from friends
Subscribers tribute to the channel, so I think I'll probably lose this for $800
Crazy, right?
Prices these days are high
Take as little as 500 bucks
And if I don't sell it this year, I'll sell it next year some nut will buy it. I'll look into all the other stuff
That's outstanding
I
Just cut off like an inch the lip and now this thing should close okay and
connect to
See, it's got like this tab over here
right and that connects to
This thing here
I
Gotta go and show something to somebody
I've been getting a lot of flakes lately. I want to just get rid of this one. This is just a push mower
That I fixed engine runs, but it doesn't run great doesn't run smooth
Anyway, I have it listed for 150. I'll take as little as 80 bucks. Let's hope we sell it. I want to get rid of it
So as you guys saw I was talking to the old guy
we
talked about the Utes because he had a sticker that was a
Feather with a circle with the U in the middle as I say Utah Utes
He's like son of a gun you must watch a lot of college football
Sure do
You don't find too many people who root for the Utah Utes here in Long Island, New York, you know what I mean?
Because who do you like? I like that. I said I like the Sooners
He was all you don't find too many people who follow the Sooners in New York either. I was born in, Oklahoma
How about it an Oklahoman and a Utah guy in Long Island, New York anyway
So he had a Craftsman lawnmower that crapped out after 23 years
I says, oh you really got good use out of it. It's like I sure did
Anyway, so I had it listed for 150
We took it down from the pickup and started up started on the first pull after I primed it three times
Is that great beautiful whatever and he didn't need a bag because he mulches and we talked a little bit about why we mulch
And not pick up grass clippings
Anyway, so he says can you do a little better and I says
140 I
Didn't think you would bite on 140. He's like, okay
I was gonna say a hundred bucks, but I mean, you know, I said 140, you know, so I'm pretty happy
I'm pretty happy 140 bucks for that piece of junk that
Bores just you're running them. I mean five years ago
Right before the pandemic you think I would get a hundred and forty bucks for that little thing
I mean, that's your basic push mower. No bag. No, I mean, so pretty stoked
I mean, I would have been lucky to get 80 bucks for it like five years ago, but yeah
140 bucks
15 minutes, you know what? I mean? He texted me. I said they gave him an address. I met him over there. Boom
Anyway, that's a good afternoon so far
All right, so that's another project finished
Got the Toro
working running great
mowing great
Looking great. I still have
This one here that needs a new engine. I
Have a polar command engine over there to be put in
This is stuck. It's wheels are
There's no air in them. It's a hydro
Can't push it easily
I'll get to that when I finish the next victim, which is this one
Has a seized engine on it. I want to try to unseize it. So that's my next episode
Pretty good. Huh guys four episodes on that Toro wheelhorse
1438 HXL now, it's a 17.5
38 HXL
Repower project for that Toro. I always like those Toro mowers pretty cool looking
And there was a lot of people who liked them. So hopefully I'll get close to $800 for it, which would be amazing
We just spent nine dollars and 65 cents on the mower deck belt. And also we took the battery from
Blue Bayou, so that's like 40 50 bucks, right?
so I'm in this for like 50 60 bucks tops and
I'm gonna have to go buy some new batteries eventually when I start working on two more tractors, but this is my next victim
I
Sold it to my neighbor
Three four years ago. She never looked at the oil
So one day she was mowing just stopped
So I'm gonna go and see if I can unseize the engine on my next episode and get this thing running again
If not great parts for other builds, you know other quantums and now I have a couple of decks
I need to try to find a couple of
Dunski motor Dunski mowers with good motors on them and
You know, we'll keep these for inventory for next spring
Hopefully I'll be able to get a couple of engines by then
I'm sure I will but it's been pretty dry these days not many people throwing stuff out
At least I haven't seen them or gotten any good tips recently
But I did spend a lot of time trying to get that tractor going
Anyway, hope you guys enjoyed the series on the Toro wheelhorse. We'll see you guys next time. I'm always a bowler
See you guys next time I'm Morrison blowers and blowers