Lecture 55: Tutorial 11

IIT Roorkee July 201
61 followers
Oct 22, 2023
Hello everyone, now we will have a tutorial session and in this class we will solve some
numerical problems based on our discussion made in the last four classes.
Problem number one, the statement is a country discards roughly 158 million tons of MSW.
The high heating value of those discards is about 6000 BTU per pound, a mass burn waste
to energy facility can convert those wastes to electricity with a heat rate of 17000 BTU
of thermal input per kilowatt hour of electrical output, roughly 20% efficiency.
the electrical energy that could be produced per year if all the discards were used in
this type of WTE system, compare it with the total energy generated which is about 4500
into 10 to the power 9 kilowatt hour per year.
So this is the problem statement, now we have to solve.
So what we will do, we will see that what is the electrical output we can get from
this waste and then total electricity production which is provided here.
So we will take the ratio of that.
So electrical output that equal to how much it will be, we are using 158 million tons
of MSW.
So this 158 into 10 to the power 6 ton per year, so that is million to this 10 to the
power 6 ton per year into then we are multiplying it by 2000 pound per ton because this is unit
conversion.
So ton to pound, so this is multiplied by this 2000 and then what we will do, the heat
content of it.
So now we are getting the total waste generated in pound unit.
So then we will multiply it with the heating value that is 6000 BTU per pound.
So now which we are getting that will be in BTU unit per year, but we need kilowatt hour
per year.
So then 1 BTU that is it is given here that is the heat rate of 17,000 BTU of thermal
input per kilowatt hour of electricity.
That means for the production of 1 kilowatt hour, we need 17,000 BTU.
So then we have to divide it by 17,000 BTU per kilowatt hour.
So then it is we are getting 111.5 into 10 to the power 9 kilowatt hour per year.
So this is the electrical output which is generated by the consumption of this amount
of MSW.
So first part we have got the answer.
Then second part we have to compare it with the total energy generated that is equal to
this one 4500 into 10 to the power 9 kilowatt hour per year.
So this is the production, so 115.5 into 10 to the power 9 kilowatt hour per year and
this is total production.
So this is the energy from waste to energy conversion and this is the total energy production
in the country.
So then we will get this is the fraction.
So multiply it by 100, so that will be in percentage, so 2.4% is in percentage.
So total energy consumption, so 2.5% of the total energy consumption is coming from this
waste to energy plant, okay.
So now we will move to problem number 2 and the statement is estimate the landfill area
needed to handle 1 year's MSW for a town of 2 lakhs people.
Assume per capita national average discards of 5 pounds per day, no combustion, a landfill
density of 1000 pound per year cube and one 10 feet lift per year.
Assume 20% of the cell volume is soil used for cover.
So this is the problem statement.
Now we have to find out the area requirement for this landfilling.
So at first we will calculate the volume of the MSW, then we will see the volume of
the cells, then lift is given.
So from that we will get the value of the area requirement, okay.
So now let us see the volume of MSW.
So volume of MSW is equal to mass of MSW divided by density of MSW.
So mass of MSW can get total number of people and the generation per 1 persons.
So that is 5 pounds per day per person.
So 5 pounds per day per person that we are getting into 365 day per year.
So this is per year per person production of waste and we have this number of total
people.
So we will multiply this 2 lakhs.
So this the numerator term is the total waste generated, the mass of the waste generated.
Then we will divide it by the density of it.
So we will get the volume.
So then we are getting 365000 yard cube per year.
So this is our total volume of the MSW.
Now it is given that 20% of the cell volume is soil used for the cover.
So 80% is MSW and 20% is the volume of the soil which is used for this purpose.
So this is MSW volume.
So what will be the cell volume?
We have to divide it by 0.8.
That means the cell volume will be more than the volume of the solid waste.
So then that is 365000 yard cube divided by 0.8 that is equal to 456250 yard cube per
year.
So this is the volume of the cell.
So which is used to discharge the MSW for 1 year.
Then per year lift it is given, 10 foot lift per year.
So the area of the lift per year of 10 foot per year of depth that will be, so area into
lift that is equal to volume of the cell.
So area is equal to volume divided by lift.
So here it is given 456250 yard cube per year we have got.
So we are interested to convert it now into feet cube.
So then this is the unit for the conversion of yard cube to feet cube.
So 27 feet cube per yard cube.
So this one, so that is now getting feet cube per year and our lift is 10 feet per year.
So we will divide it by 10 feet per year.
So then the value we are getting by this expression is 1, 2, 3, 1, 8, 7, 5 feet square.
So this is the area which we are getting from the calculation and volume also we are getting
but actually the area requirement will be more.
Because there are some additional activities which will be associated with the active filling.
So the actual sizing of a landfill would include a number of additional factors such
as additional area requirements for access roads and auxiliary facilities, reduction
in landfill volume as biological decomposition takes place and increases in compactions as
additional lifts are included.
So because of this the actual requirement will be differed to some extent from this
one and it will be more than this.
Now problem number 3, the statement is wastes such as tires can be disposed of using a process
known as pyrolysis.
A car tire has a mass of 20 kg, 47% by mass of a car tire can be converted into carbon
and 25% by mass can be converted into gas which is mainly methane.
What volume of methane at room temperature and pressure is produced in the process if
80,000 tires are treated through this process?
So this is a problem statement of a pyrolysis process waste tire is converted to different
pyrolysis products and it is assumed that the gas which is produced only methane is
present to make the calculation more simple.
So here we will have to do some mass balance.
So let us see mass of 80,000 tires that is equal to 80,000 into 20 kg that is into 20
into 1000 gram, so 16 into 10 to the power 8 gram.
So this is the mass of 80,000 tires.
Now 25% of this is converted to gas.
So 25% of this is equal to 25 into 16 into 10 to the power 8 divided by 100, so that
is equal to 16 into 10 to the power 6 gram of methane.
Now molecular mass of methane is equal to 16 gram.
So moles of methane is equal to this much 25 into 16 into 10 to the power 6 divided
by 16.
So 25 into 16 by 16 into 10 to the power 6 mole, so that is equal to 25 into 10 to the
power 6 moles.
Now 1 mole occupies 22.4 liter or decimeter cube, volume at NTP we know it very well.
So volume of this moles of methane will be 22.4 into 25 into 10 to the power 6 decimeter
cube or liter, so that is equal to 5.6 into 10 to the power 8 liter and that is equal
to 5.6 into 10 to the power 5 meter cube.
So this is the volume of the methane which is generated to this pyrolysis.
Now the room temperature is 30 degree centigrade.
So volume will be T plus 273, so 303 divided by 273 into 5.6 into 10 to the power 5 meter
cube that is equal to 6.215 into 10 to the power 5 meter cube.
So this will be the volume of methane at 30 degree centigrade.
This we can get that is equal to P1 V1 by T1 equal to P2 V2 by T2.
So here P1 and P2 both are same in this case.
So by using this formula we are getting this the volume of methane at 30 degree centigrade.
Now problem number 4, the statement is in an MSW gasifier air flow rate and feed flow
rate are 10 normal meter cube per second and 8 kg per second respectively.
The MSW does not contain any sulphur, nitrogen and chloride.
The syngas contains carbon monoxide 40%, CO2 2%, H2O 30%, CH4 5% and C2H2 2%.
Calculate the rate of production of syngas in normal meter cube per kg of MSW.
So again this is another problem related to the handling of MSW through gasifier and through
the gasifier we know that producer gas or syngas when we use the oxygen we get syngas
and when we use the air we get producer gas.
So this is the case of producer gas production.
Now what we will see this is also again can be solved on the basis of mass balance of
nitrogen.
So we know that if the fuel gas production normal meter cube per kg, so this is so in
the fuel gas what will be the nitrogen production or the nitrogen available in this fuel gas.
So this is the production rate into the nitrogen concentration of it.
You see the CO, CO2, H2, CH4, C2H2 these are the gas components present in the producer
gas.
So 100 minus this if we take so that will be nothing but the nitrogen which is available
in it and it is coming through the air we are using for it.
So this nitrogen into this and feed rate that is normal meter cube per kg so this
kg per second so that will be the normal meter cube per second unit we are getting the fuel
gas production.
So right hand side in that case we will get air flow rate that is normal meter cube per
second into 0.79 because 79% of volume of the flue gas or air we are getting here air
flow rate the nitrogen this is output and inlet is this one air flow rate.
So air flow rate into the 0.79 that is the percentage of nitrogen present in the air.
So this is the total volume of nitrogen present in the air and this is volume of nitrogen
present in the fuel gas.
So this expression is just on the basis of nitrogen mass balance.
So now we will be putting the values provided here.
So in this case we are getting 10 into 0.79 air flow rate.
What is the air flow rate?
10 normal meter cube per second so 10 into 0.79 divided by 1 minus 0.4, 0.02, 0.3, 0.05,
0.02.
So this is the fraction of it so different gas components and then this has to be multiplied
by the feed rate that is equal to 8 kg per second.
So this is the syngas production.
So we are getting by solving this at 7.9 into 0.1 into 8 that is equal to 4.702 normal
meter cube per kg MSW.
So this is the syngas production okay.
So now we are able to solve the problem.
Next problem statement number 5, a pyrolysis plant handles 0.5 TPD MSW and produces gas
char and liquor.
Operating temperature is 788 degree centigrade and pressure of the reactor is 1 atmosphere
respectively.
The gas composition volume percent is H2 39.10, CO 33.50, CH4 13.10, CO2 14.3.
The mass percent of production of gas char and oil are 35, 20 and 45 respectively.
Define the number of moles of each component of gas produced per day.
So we have to calculate the number of moles of each component of gas produced per day.
So this is a problem related to pyrolysis of MSW.
So here we are taking a basis that is 500 kg MSW per day.
So mass of gas produced is equal to 500 into 35% of it so 0.35 so that is 175 kg per day.
So mass of char produced equal to as it is 20% so 500 into 0.20 so 100 kg per day.
Mass of oil produced which is 45% so 500 into 0.45 so 225 kg per day.
We are getting the gas which is having different components.
So average molecular weight of gas produced will be 39.10% hydrogen so 0.3910 into 2 so
this is 33.2 that is nitrogen so plus 0.335 into 28 plus 0.131 into 16 oxygen plus 0.143
into 44 that is carbon dioxide 14.3%.
So then we are total we are getting 18.55 kg per mole.
So this is the average molecular weight of gas produced.
So gas produced in kilo mole per day that is equal to we have 175 kg per day.
So 175 divided by 18.55 we are getting so that we are getting 9.43 kilo mole per day.
So this is the gas production per day.
Now we have to calculate individual gas molecules production per day.
So hydrogen production so 9.43, 9.43 is the kilo mole total gas so individual will be
in the same ratio.
So 9.43 into 39.1 divided by 100 so 3.69 kilo mole per day.
So carbon monoxide production that is equal to 9.43 into 33.50 by 100 that is 3.26 kilo
mole per day.
Admittance produced equal to 9.43 into 13.10 into 100 13.10 divided by 100 that is equal
to 1.24 kilo mole per day.
And carbon dioxide produced will be 9.43 into 14.3 divided by 100 so that is 1.35 kilo mole
per day.
So on the mole basis these are the production of different components per day.
So the problem is solved now.
Now we will move to the next problem, problem number 6.
The statement is a dry MSW has the following composition on mass basis.
Carbon 40 percent, hydrogen 5 percent, oxygen 30 percent, ash 25 percent.
Determine the stoichiometric oxygen requirement for the combustion of the MSW.
Assume the ash as inert and average molecular weight of ash is 56.
If the ratio of nitrogen to oxygen in air is 4 is to 1 volume by volume ratio, determine
the stoichiometric requirement of air.
So this problem is basically related to the incineration of MSW.
So we have to calculate the stoichiometric requirement of air.
So again we will take here a basis that is 100 gram dry MSW.
So carbon is 40 percent so 100 into 0.4 so 40 gram that is equal to 40 divided by 12
so 3.33 moles per 100 gram MSW carbon is present.
So hydrogen is equal to 5 percent so 5 gram so mole will be 5 by 1 this is 5 moles and
oxygen is equal to 30 percent so 30 gram so 30 divided by 16 so that is equal to 1.875
moles and ash 25 percent so 25 gram and divided by 56 molecular weight so this 0.4464 moles.
So these are the number of moles present in 100 gram of dry MSW.
So we can get the average molecular formula of the MSW as C 3.33 H 5 O 1.875 and ash 0.4464
so this is the molecular formula of the MSW.
Now if we take the general expressions for the incineration or combustion so C A H B
O C ash G plus D O 2 that is giving us E mole H 2 O plus F mole CO 2 plus G mole ash.
So in this case A we have got the value 3.33 B is 5 and C is 1.875 and G is 0.4464 so this
is given so we have to calculate the value of D.
So by doing some balances of elemental mass that is carbon balance from both side hydrogen
balance oxygen balance ash balance etc.
So we will get some relationship with this E and these known variables and from that
relationship we will get the value of all these unknown variables and once we will be
able to find out the value of D that the stoichiometric requirement of oxygen we will be able to calculate
and since 4 is to 1 the ratio nitrogen is to oxygen in the air so from that we will
also be able to know the air requirement stoichiometrically.
So now if we consider the carbon balance so that is equal to 1 and this is F moles
so A is equal to F from the carbon balance.
If we do the hydrogen balance so left side is B mole and 2 E mole so B equal to 2 E and
if we do the oxygen balance then C plus 2 D left side and right side is E plus 2 F so
oxygen balance.
So these are the relationship we are getting again A is equal to already we have got 3.33
so A equal to F equal to 3.33 now B equal to 5 so E equal to 5 by 2 so 2.5 and C is
equal to 1.875 already we have got.
So these expressions we will put these values 1.875 plus 2 D equal to E is equal to 2.5
already we have got and plus 2 into F, F is that is 3.33 we have got so then by rearranging
we are getting 2 D equal to 2.5 plus 6.66 minus 1.875 so we are getting 7.285 or D is
equal to 3.6425.
So now we are able to calculate the value of D so 3.6425 moles will react with this
MSW to get the different products therefore for 100 gram of MSW oxygen requirement is
this much this moles into 32 so that is 116.56 gram so stoichiometric requirement of oxygen
is this much gram per 100 gram of MSW or 1.1656 gram oxygen per gram of MSW.
So this is our requirement of the oxygen.
Now nitrogen in the air containing 3.6425 moles oxygen that is equal to 4 is to 1 ratio
so 4 into 3.6425 so that is equal to 14.57 mole.
So mass of nitrogen will be this into 28 molecular weight so 407.96 gram so this is the nitrogen
and this is our oxygen so then we will be this much of oxygen so we are getting the
mass of air is equal to 407.96 plus 116.56 that is equal to 524.52 gram.
So stoichiometric requirement of air is equal to 524.52 gram per 100 gram of MSW.
So now we are able to solve the problem and we have seen the stoichiometric requirement
of air.
So now we have solved all the problems and thank you for your patience.
