DIY: Connecting a Gutter to a Drain Pipe

TightWadDIY
899 followers
9 Video Views·Jun 9, 2015
Rainwater from gutters can be very harmful to the foundation of your home. You should always either channel the water away from your house with gutter extensions or connect your gutters to a drain pipe that moves the water to another location. This video shows how to do the latter. This is an easy project that can be done quickly if the drain pipe is already buried.
Welcome back YouTube. This is the tightwad and today we're going to be running
This downspout gutter that comes off the back side of my house
down into a pipe
That is buried along the edge of this house. There's already a drain pipe buried for my other gutters
This one was detached because I was using it to collect rainwater for water in my garden
but I did away with my water tank and
Now I just have it rigged up
To run off into a flowerbed so that it doesn't flood the area in the back of my house
So the things we need are a shovel. I'm gonna hacksaw. I have some
Pieces of the gutter and I have this T adapter. The pipe was a little bit deeper than I anticipated
So instead of my hacksaw, I'm gonna use my reciprocating saw to cut the pipe
I have to cut about four inches of pipe off in order to fit the T into place
You can see I've removed about four inches of pipe and the T
Will go down in here and the pipe clips or clicks in the both ends
I might have to cut it off a little bit more but it's better to cut too little than too much
The new T is now installed. I felt it click in on both sides and now I can work my way up
to the spout from the gutter
First thing I'm gonna do is add an extension to the gutter to get it as close to the ground as possible
With the extension in place, I only have about a foot maybe a foot and a half left to cover
I'll use this drain pipe made to drain water away from your house because it'll easily fit over the gutter and
Down into the four inch pipe. So I'll use the reciprocating saw to cut this as well
As you can see my gutter comes down goes into the extension
Down into this plastic sleeve and into the T and we'll know that about 15 minutes
This project is almost complete
The last thing to do is to put in some sheet metal screws through the gutter connection and through the connection here
To hold everything in place. Then you just backfill with dirt and you're good to go
I've secured both sides here and here with screws and
Ready to backfill with dirt as always. I appreciate you watching if you feel like this video was helpful
Please give it a thumbs up
Subscribe to my channel for more home repair and lawn repair videos
Feel free to leave any kind of questions you may have in the comment section below
