STRESS STRAIN RELATION || EC 465 MEMS || S7 ECE KTU || LECT 8 || MODULE 1
Oct 6, 2023
This video explains stress strain relationship
FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
In the last class, we discussed about what is stress and what is strain.
Today we are discussing about stress-strain relationship.
We are doing tensile test to decide the stress-strain relation.
We apply a tensile force on a road in longitudinal direction.
The amount of relative displacement and applied stress are plotted on a stress-strain curve until the beam breaks.
At low levels of applied stress and strain, the stress value increases proportionally with respect to the developed strain, with proportionality constant being Young's modulus.
This region is called elastic deformation regime.
If we remove stress in this region, the material will return to its original shape.
That is why it is called elastic deformation regime.
If we remove stress in this region, the material will return to its original shape.
If this stress exceeds a certain level, the material will enter into plastic deformation regime.
You can see that there is no linear relationship between stress and strain in the plastic deformation regime.
If we continue to deform the material, it will not be able to return to its original shape.
For example, we take a metal and bend it.
If we bend it slightly, it will return to its original shape.
If we bend it at a certain angle, it will not return to its original shape.
That is why it is called elastic deformation regime.
The stress-strain curve is different for each material.
There are two noticeable points for this.
Yield point and fracture point.
Before the yield point reaches, the material is called elastic.
Between yield point and fracture point, the specimen undergoes plastic deformation.
There is a plastic deformation regime between yield point and fracture point.
What happens when fracture point reaches?
It is destroyed.
Irreversible failure occurs to the specimen.
The y-coordinate of yield point is the yield strength of the material.
The y-coordinate of fracture point is designated as the ultimate strength of the material.
A material is strong when it has high yield strength or high ultimate strength.
Silicon is even stronger than stainless steel.
Because silicon has high yield strength and high ultimate strength, it is stronger than stainless steel.
The stress-strain curve is different for each material.
Let's see some important properties of materials.
Dactility is an important mechanical property.
It is a measure of degree of plastic deformation that has been sustained at a point of fracture.
Dactility is degree of plastic deformation.
If a material has no plastic deformation, it is called brittle material.
Silicon is an example of a brittle material.
It fails in tension with only little elongation after the proportional limit exceeds.
Dactility may be expressed quantitatively as either percentage of elongation or percentage of reduction in area.
Dactility is a measure of degree of plastic deformation that has been sustained at a point of fracture.
If a material has no plastic deformation, it is called brittle material.
Silicon is an example of a brittle material.
Toughness is the ability of the material to absorb energy up to fracture.
Toughness is the result of tensile stress-strain test.
Toughness is the area up to the point of fracture of the stress-strain curve.
For a material to be tough, it must display both strength and ductility.
Resilience is the capacity of a material to absorb energy when it is deformed elastically and then upon unloading to have this energy recovered.
Stress and strain are tensile forces.
Their relationship can be conventionally expressed in matrix form in which stress and strain are expressed as vectors.
A cube is considered to visualize the stress-strain.
The stress component acting on the cube is given.
A cube has 6 faces.
There are mainly 12 shear force components.
The components of each face are of equal magnitude and opposite direction.
The components are equal magnitude and opposite direction to balance the total force.
The number of shear stress components is reduced to 12.
To identify each component, two subscripts are added to the shear stress component.
The component represented here is tau xy, tau yx, tau xz, tau zx, tau zy, tau yz.
tau xy, tau yz, tau xz, tau zx, tau zy, tau yz are equal.
This means that the number of shear stress components in a mutually perpendicular plane is always equal.
So, the number of independent shear stress components can be reduced to 3.
Initially, there were 12 possible shear force components.
We reduced them to 6 and converted them to 3.
Now, let's look at the normal stress component.
Earlier, we had categorized stress into two categories.
Here, there are 6 possible normal stress components.
Each face has a normal stress component.
In equilibrium condition, the magnitude of the normal stress in the opposite face is the same.
But the stress component acts in the opposite direction.
We can reduce the normal stress component to 3 and convert it to 3 independent normal stress components.
In the case where the opposite faces are the same.
The symbol denoting the normal stress is denoted by sigma.
We can represent this sigma with two subscript letters.
The three independent normal stress components are sigma xx, sigma yy, and sigma zz.
We can simply represent this as T1, T2, and T3.
The shear stress components are tau yz, tau xz, and tau xy.
We can represent this as T4, T5, and T6.
We can write the matrix formula as T1, T2, T3, T4, T5, and T6 is equal to coefficient matrix into strain.
We can write it as T is equal to C into x.
The other name for coefficient matrix C is stiffness matrix.
Similarly, we can rewrite this to find the strain.
We can write S1, S2, S3, S4, S5, S6 as strain is equal to a matrix into stress.
The name of that matrix is compelence matrix S.
Compelence matrix S is the inverse of the stiffness matrix.
We can write S is equal to C inverse.
It is wrong to denote compelence matrix as C and stiffness matrix as S.
Stiffness matrix is denoted as C and compelence matrix is denoted as S.
Don't get confused.
Compelence matrix is denoted as S and stiffness matrix is denoted as C.
This completes the first module.
I hope everyone understood.

