noc18-me58 Lec 14-Relations for Stress and Strain along Thickness of Laminate

IIT Kanpur July 201
20 followers
Dec 3, 2023
Hello, welcome to advanced composites. Today is the second day of the ongoing week which
is the third week of this course. Yesterday we just started our journey in terms of developing
strain displacement relations in context of classical lamination theory and the first
relation we had developed was that for U which is the displacement of a point on the plate
in the x direction and we had expressed this U displacement in terms of U naught which
is the displacement of point corresponding point with same x and y coordinates on the
mid plane of the plate and also the slope of the plate that is partial derivative of
W with respect to x. So, the relation which we had developed was
U which can vary. So, it is U which is a function of x and y and z is nothing but U
naught which is the mid plane displacement minus z times delta partial derivative of
W and W is a function of x and y. So, it is because it is being calculated or measured
at mid plane. So, partial derivative of W naught with respect to x.
So, this is the relation for U likewise this plate right now I bent it in the I applied
forces. So, that it develops a curvature which is delta W over delta x. I can also bend the
plate in the other direction and using similar thought process I can develop another relation
for V which is the displacement in the y direction. So, that is x V which is a function of x y
z is equal to V naught which is the mid plane displacement located at coordinates x and
y minus z del partial derivative of W with respect to y. So, these are the relations
between U and V in terms of mid plane displacements U naught and W naught.
Now, we know that strain in x direction epsilon x is equal to del U over del x. So, when I
do this and I differentiate the entire thing I get del U naught over del x minus z del
2 W naught over del x square. Now, I call this thing as epsilon naught x which is the
mid plane strain in the x direction and I call k x which is the curvature of the mid
plane of the plate and I define it in such a way. So, I can write the relation that epsilon
x is equal to mid plane strain in the x direction plus z times curvature of the plate at the
mid plane. Now, for this remember here epsilon x is a
mid plane strain it depends only on x y. So, if I have to expand it is a function of only
x and y. Similarly, k x which is the curvature of the plate it only depends on x and y. So,
it is a function of x and y only, but because I have this z in this relation the overall
strain for any point which is away from the mid plane is actually a function of x y and
z. So, this is the relation I developed from the first from this relation likewise I can
also develop a relation that epsilon y is equal to partial of v with respect to y and
if I do similar mathematics what I get is del v at the mid plane with respect to y plus
z times k y which is the curvature in the y direction where k y in the y direction is
defined as minus second derivative of mid plane deflection in the z direction with respect
to y. So, I can also express this relation as epsilon
y is equal to epsilon y at the mid plane plus the z coordinate of the point times k
y which is the curvature in the mid plane direction and finally, we will also develop
relations for the shear strain. So, we know that gamma x y equals gamma x y equals what
it is del u over del y plus del v over del x and if I do the entire mathematics again
what I get is del u naught over del y plus del v naught over del x minus 2 z del 2 of
second derivative of W naught with respect to x and y and then I define a shear curvature
k x y naught is equal to negative of twice second derivative of W naught with respect
to x and y. So, I get my final relation for shear strain
and that is equal to mid plane strain component plus z times k x y. So, what we will do is
we will summarize these strain displacement relations. So, I can say that epsilon x epsilon
y gamma x y and all these are functions of x y and z these are equal to their mid plane
components epsilon x evaluated at mid plane epsilon y evaluated at mid plane and gamma
x y evaluated at mid plane plus the value of z coordinate times mid plane curvatures
k x naught again evaluated at mid plane k y naught evaluated at mid plane and k x y
naught evaluated at mid plane. So, these are the strain displacement relations.
Why are they strain displacement relations? Because on the left side I have a strain and
on the right side I have mid plane strains and mid plane curvatures and I know that mid
plane strain epsilon x is del u over del x epsilon y naught is del v over del y and gamma
x y naught is del u naught over del v plus del v naught over del x and likewise we have
definitions of curvatures also in terms of mid plane deflections which is w naught and
then there. So, these are 3 strains and then the what are the other 3 strains? The other
3 strains are gamma y z equals 0 gamma x z equals 0 and epsilon z z equals 0 and these
are based because of our assumptions. The first 2 strains are 0 because of the normality
assumption and the last strain epsilon z z is 0 because of the assumption of in extensibility.
So, this concludes our discussion on strain displacement relations and what we will do
next is we will see that how these strains can be related to now stresses. So, if I have
a laminate and let us say this is x axis this is my y axis and downwards is z axis and let
us say there are several layers and likewise I have similar lines visible from the other
side and let us say I number these layers let us say I call this layer number 1, 2,
3, 4 and 5. So, this is a 5 layer laminate and what I am interested in is in finding
the stress let us say in some layer. So, I am interested in finding stresses in kth layer
where k could be an index anywhere between 1 to n if there are n layers in the laminate
then k will be anywhere between 1 to n. So, suppose I am interested in finding out
then what do I do? What I do is we know that what is the strain and stress relationship
for any layer if I know epsilon x epsilon y and gamma x y for any layer then for that
particular layer I can write sigma x sigma y and tau x y and this is we are discussing
for kth layer. So, we will put a subscript k this is equal to. So, for each layer there
will be a q bar matrix there will be a q bar matrix. So, it will have q 1 1 bar q 1 2 bar
q 1 6 bar q 2 2 bar q 2 6 bar and q 6 6 bar and then these are all this is a symmetric
matrix. So, I do not need to write other elements. So, this stress is equal to q bar
matrix times the strain. So, if I am interested in finding stress at any point then what do
I do? I have calculated strains at that point and I multiply the strains with the proper
q bar matrix. So, what is this? So, this is epsilon x epsilon y and gamma x y and these
strains are varying from layer to layer. So, this is for kth layer and this is also
for kth layer. So, in short I can write that my stress vector for the kth layer is equal
to the product of the stiffness matrix for kth layer times the strain vector for kth
layer. But we know that q bar matrix I mean this
changes, but this strain vector is nothing, but different components it has a mid plane
component and a bending component. So, this I can express it as the mid plane strain and
mid plane strain does not change from one layer to other it is at the mid plane plus
z times k mid plane curvature and the value of z is for the kth layer. So, I can write
sigma for kth layer is q bar matrix for kth layer times the mid plane strain vector plus
z for kth layer because curvature is again independent of layer times q bar matrix for
kth layer times curvature at the mid plane. So, this relation will help us calculate strain
stresses at any point in a given layer. So, what do I do suppose there is a particular
point in a given layer first step is that I find out its value of z based on our coordinate
system. So, once I calculate find out its z value then I if I know the mid plane strain
and mid plane curvatures then all I have to do is multiply that mid plane strain by q
bar for that particular layer. So, I will get the first component and then I multiply
q bar with the mid plane curvature and I also multiply it with the z coordinate and
I get and I add these up and I will get the stresses at that point in the laminate.
So, this is one thing the other thing I wanted to discuss is that how do stresses and strains
variation of stresses and strains along the thickness how do they change. So, what essentially
what we will discuss is that suppose there is a laminate and let us say it has three
layers and this is the mid plane. So, this is z is equal to 0 and this is the x direction
and at the mid plane z is equal to 0 and this has let us say it has three layers layer number
1 2 and 3 then what happens as I travel from here to here how does a stress change how
does a strain change and how does the stiffness of the layer change as I move from z is equal
to. So, suppose this is t by 2 and this is another t by 2. So, the overall thickness
of the laminate is t then as I move from top surface of the composite to the bottom
surface of the composite how is a strain changing across the thickness and how is a stress changing
across the thickness. So, this is what we will discuss in our next
class and also we will then further advance this theory and we will go to the third stage
of this overall process which will involve developing relations at the laminate level
between forces moments strains and curvatures. So, that is the conclusion for today's lecture
and I look forward to seeing you tomorrow.
Thank you.
