FLEXUAL BEAMS || EC 465 MEMS || S7 ECE KTU || LECT 9 || MODULE 2
This video explains
1.Over view of module 2
2. Flexual beam
3.Types of beams
FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
#ktu #mems #ktuececlassroom
hi all, today we are going to start our new module, module 2, so in this module
there are two sessions, first one includes flexural beams, it may contain
some types of beam and it's working and second part of this session is this
module is actuation and sensing technique, we have studied some senses
and actuating devices, here we study a detailed analysis of thermal sensor and
actuator, electrostatic sensor and actuator, piezoelectric sensor and actuator
and magnetic sensors, so let us start our second module, first what is flexural beam?
flexural beams are commonly encountered in MEMS as a spring support element
essential skills and common practices for MEMS researchers including
calculating the bending of a beam under simple loading condition, analyzing
induced internal stress, determining the resonant frequency associated with the
element, so what are the types of beams? A beam is a structure member subjected
to lateral loads that forces or moment having their vectors perpendicular to
the longitudinal axis, beams are usually described in a manner in which they are
supported, so the boundary condition pertain to deflection and stops and
supports of a beam, here we are considering two-dimensional beam with
moment confined in one plane, each point along the length of the beam can be can
have a maximum of two linear degrees of freedom, one and one rotational degree of
freedom, here the beam has two degrees of freedom, one is like this and another is
like this, these are the two linear degrees of freedom and one rotational
degree of freedom, so three possible boundary conditions are summarized below
according to their restrictions of degree of freedom, so first one is fixed
boundary condition, in the case of fixed boundary condition, it restricts both
linear degree of freedom and rotational degree of freedom, so there is no moment
is allowed at the support, at fixed support a beam can neither translate nor
rotate, example the ground end of a flagpole is a fixed boundary condition,
next is gated boundary condition, in the case of a gated boundary condition, it
allows two linear degree of freedom but restrict rotational degree of freedom, so
that's about gated boundary condition and third one is free boundary condition,
the case of free boundary condition provide both linear degree of freedom
and rotational degree of freedom, at a free end, a point on a beam may translate
and rotate, example the free end of a diving board is an example of free
boundary condition, these are the three boundary conditions which we mentioned
fixed, gated and free, in the case of fixed there is no linear degree of
freedom and no angular degree of freedom, that means the one end is fixed, example
we said that the ground end of a flagpole is an example of fixed boundary
condition, in the case of a gated boundary condition, the number of linear
degree of freedom is 2 and number of angular degree of freedom is 0, so it can
move in a linear path like this or a gated path, in the case of free boundary
condition, it can move on linearly, it has a rotational degree of freedom, so it
have a two number of linear degree of freedom and one number of angular degree
of freedom exist in the case of free boundary condition, so these are the
boundary conditions, flexural beams can be classified according to the
combination of two mechanical boundary conditions associated with it, for
example a beam fixed at one end and free at the another is conventionally referred
to fixed free beam, commonly called a cantilever beam,
cantilever is a beam fixed at one end and free at the other,
in MEMS research the following types of beams are most frequently encountered,
fixed free, fixed fixed, fixed gated,
fixed free means one end is fixed and the other end is free,
fixed fixed means two ends are fixed,
for example bridges, we can say bridges,
two ends of the bridge will be fixed,
fixed gated means it has a linear degree of freedom but no rotational degree of freedom,
one end is fixed and the other is gated,
so the figure below depicts several commonly encountered beam stretches on a substrate,
we can see the commonly used beam stretches in a substrate,
A, B, C, D, E, F, G, H, K,
these are the beam stretches of various types,
now let us look at each one,
first one, a fixed free cantilever parallel to plane of substrate,
with a free tip capable of moving in a direction to the normal of the substrate,
lateral and plane movement of free end would encounter much significant resistance,
A is fixed free,
this portion is fixed,
the rest is free,
here there is no touch with the substrate,
it is free,
there is a possibility of free movement,
this is a commonly used flexural beam structure,
next one, a fixed fixed beam,
fixed fixed means,
as we said earlier,
it is called a bridge,
fixed fixed beam,
that is parallel to the substrate plane,
this is what we see,
both the ends are fixed,
beam means parallel to,
parallel to the substrate plane,
this is fixed fixed,
otherwise it is called a bridge,
there are actually two ways to classify this beam,
it can be considered a fixed fixed cantilever,
parallel to the substrate plane,
with a thick and stiff part in the middle,
alternatively,
this beam can be considered a two fixed guided beam,
joined in parallel to support a rigid part,
see,
two portions are fixed,
one portion on top,
this is how it is,
it can be considered as a guided beam,
this is another structure,
now,
what do we see in D,
what is D,
it is a cantilever,
here it is fixed,
one end is fixed,
other end is free,
here it is free,
this is a cantilever,
what is E,
E is a fixed free combination,
here it is fixed,
what is F,
F is a bridge,
both the ends are fixed,
let us see D,
D is a fixed free cantilever,
with the free end is capable of moving in perpendicular to the substrate,
its behavior is similar to that of A,
A gives M,
E is also a fixed free cantilever,
and capable of movement within the substrate plane,
next is a fixed fixed beam,
fixed fixed beam or bridge,
what is F,
fixed fixed,
fixed fixed beam or bridge is F,
G,
G is a fixed free cantilever,
carrying a stiff object at the end,
G is a fixed free cantilever,
here it is free,
but what is fixed here,
an object is placed at the end,
such a structure is seen in G,
H,
the beam is very similar to case C,
except for the fabrication method,
H,
H is similar to case C,
except for the fabrication method,
I,
I is a fixed free cantilever,
with folded length,
I is fixed here,
everything else is free,
but what is done,
the end of this is folded,
next is J,
J is a fixed free cantilever,
connected in parallel,
the combined spring is stiffer than any single arm,
to get a little more stiffness,
we have combined two arms and formed a cantilever,
this is the same,
cantilever itself,
but here two arms are given,
here it is,
next is K,
K is a four fixed guided beam,
connected to a rigid shuttle,
which allowed to move in the substrate plane,
but restricted out of the plane,
translational movement,
K is fixed,
there is no translational movement,
these are the various beams,
of different boundary conditions,
we are using,
the commonly encountered beam stretches in MEMS,
are double clamped suspension structure,
and single clamped cantilever,
we usually use cantilever stretches,
to form MEMS devices,
so,
what are flexural beams are commonly encountered in MEMS,
as a spring support element,
flexural beams are used as spring support elements,
flexural beams analysis focuses on,
calculating the bending of a beam,
a beam under simple loading condition,
analyzing induced internal stress,
determining resonant frequency associated with the element,
flexural beam analysis focuses on,
bending of a beam,
internal stress,
resonant frequency associated with the element,
next we discussed types of beams,
beam is a structure member subjected to lateral loads,
beams are usually described by the manner in which they are supported,
deflections and slope of supports of the beam,
boundary condition depends on deflection and slope,
maximum two linear degree of freedom,
and one rotational degree of freedom,
if we consider a two dimensional beam,
we can divide it into fixed boundary condition,
guided boundary condition,
and free boundary condition,
based on this we explain the working of the beam,
fixed means,
restrict both linear degree of freedom,
and rotational degree of freedom,
that means no movement is allowed at the support,
flag end of a flagpole is an example of fixed boundary condition,
guided boundary condition,
allow linear degree of freedom,
but restrict rotational degree of freedom,
free boundary condition,
provide both linear degree of freedom,
and rotational degree of freedom,
beam may translate and rotate,
beam has both linear and rotational degree of freedom,
free end of a diving board is an example of free boundary condition,
so these are the three possible boundary conditions,
fixed, guided and free,
in the case of fixed boundary condition,
the number of linear degree of freedom is zero,
guided two,
and free,
linear degree of freedom is two,
a fixed case,
it will not allow linear or angular degree of freedom,
so both are zero,
in the case of guided,
it allow linear degree of freedom,
but restrict rotational degree of freedom,
or angular degree of freedom,
so that remains zero,
in the case of free,
it allows both linear and angular degree of freedom,
so number of linear degree of freedom is two,
and number of angular degree of freedom is one,
so this shows the,
in the case of fixed boundary condition here,
no movement,
in the case of guided,
guided means it has some linear movement,
linear movement,
like this,
in the case of free,
it can have both linear and angular degree of freedom,
ok,
so based on this,
we can classify the beams,
mostly into three types,
fixed-free,
fixed-fixed,
and fixed-guided,
these are the commonly encountered beam structures,
used for MEMS devices,
so I hope all of you understand,
the lecture what I given,
so thanks for watching,
will see you in next lecture.

