Longitudinal strain under pure bending | Deflection of beams | MEMS KTU | MODULE 2 | EC365 | LECT 10
This video explains
1. Longitudinal strain under pure bending
2. Deflection of beams
FOR FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
#mems #ktumems #ktu
Hi all, today we are discussing Longitudinal strain under pure bending.
Consider a beam which is loaded.
Even the load can be concentrated load or distributed load.
When a beam is loaded, stress and strain are created throughout the interior of a beam.
Consider a beam.
This is a beam and I have shown a beam section.
Consider a beam and apply a load to it.
Load is a particular point.
This is called concentrated loading.
Or you can apply a load for a long time.
This is called distributed loading.
If we apply this loading to a beam,
what will develop in that beam?
Stress and strain will develop.
It will create stress and strain throughout the interior of that beam.
We can find the stress and strain here.
To determine the magnitude of the stress and strain,
find the internal forces and internal couples that act on the cross section of the beam.
The load causes the beam to bend, deforming axis into a curve.
Longitudinal strains in a beam can be found by analyzing the curvature of the beam and associated deformation.
Consider a portion of a beam.
When we apply loading to this beam,
what happens?
The beam will bend.
There are two types of bending here.
One is a concave side in the upper portion.
The other is a shortened side in the upper portion.
Similarly, the length of the beam in the lower portion will increase.
The lower portion will elongate.
Consider a dashed line.
The length of the line remains the same.
This is called the neutral surface of the beam.
There is a neutral axis of cross section.
The intersection between the neutral surface with any cross sectional plane is called the neutral axis.
This point is called the cross section.
How do we find the longitudinal strain of the beam?
Based on the curvature and deformation in the beam, we can find the bending in the beam.
Any interior point is linearly proportional to the distance between this point to the neutral axis.
Maximum tensile stress and compressive stress occur at the top and bottom surfaces.
Under pure bending, the maximum stress is constant throughout the length of the beam.
These are the three important guidelines we observed from stress-strain distribution.
Now, we are going to find the maximum longitudinal strain of the beam.
We are going to find the stress and maximum longitudinal strain of the beam.
Normal stress is denoted by sigma.
Normal stress at a distance h is denoted by sigma of h.
If the forces acting on an area dA are dF of h, then the force acting on dA is dF of h.
This force contributes a moment.
The equation for moment is force into distance.
Moment is the double integral of dF of h into h.
Stress is denoted by dF of h divided by dA.
dF of h is denoted by sigma of h into dA.
Force by area is denoted by stress.
Stress by area is denoted by sigma of h into dF of h.
Under the assumption that the magnitude of stress is linearly related to h,
and it is highest at the surface.
The equation for moment is sigma of h divided by dA into h.

