EASY Irrigation Sprinkler System Leak Repair

TightWadDIY
899 followers
3 Video Views·Aug 19, 2016
Irrigation leaks are easier to fix than you think. If you notice water coming up around or near an irrigation or sprinkler head, you know you have a problem. Leaving this problem unfixed can cost you alot of money on your water bill. The most common culprit is a split in the tubing that attaches to the head itself.
Hey guys, it's the tightwad and today we are
working on a another
sprinkler head in my yard
This one is sprouting water or spouting water. Excuse me all along the curb here under the sod
So we're gonna dig it up and see what's under it that
One thing I like to do is to flag the irrigation head while it's turned on
So that I can find it because they do retract down in the ground and make some difficult to find
I have some cardboard to put the sod and dirt on so I don't make a mess of my grass
I have a replacement head here
The valve that screws into the head here and some of the black funny pipe
Also have a coupling in case I need it to connect two of the pipes together
Hopefully I won't need that but I don't really know where the main line runs here. I have a pipe cutter
This is actually a PVC pipe cutter, but it works fine on this black pipe as well
I have a long spade shovel, but any shovel will work
It just makes it easier to dig deeper and get it all up at one time with this type
So I'll have some gloves to protect my hands and we will go ahead and get started. So the first thing I'm gonna do is
Dig up around the head. Let's try to stay about six inches away
So I don't have too much disturbance of my lawn
But I know that I won't cut into the pipe
Forgot to put my gloves on but I'm gonna put them on now
How the you can see the head
Was not even connected to the pipe. So I think the heads probably still good
somehow that hose
Separated from the head
You can see now that the hose
Split on the end right here, and that's what caused our problem. That's a common problem with this black hose. I've had
Six or seven different irrigation heads do this. So there's two things you can do
You can dig out all the way back
to the main PVC pipe, which is usually within a foot or two of your
Sprinkler head or you can simply cut off the tip of this and put the head back in and that's what I'm going to do
Today because I don't want to disturb my yard this time of year
If I was doing that kind of work, I would like to do that in the spring
So the grass will grow back in nicely, but I like to keep a nice lawn
So today we're just gonna cut it. I'm just gonna take my PVC cutters and
Cut it definitely make sure you're past the end of the crack
These you just squeeze and they cut right off
this is nasty, so I'm gonna get some water and
Rinse it really good before I put it back together. You don't want all that mud inside your
Sprinkler head because it just clogs it up and makes it where it doesn't work very well
So let me go rinse this off and I'll be right back
A great practice thing anytime that you have to replace a sprinkler head is to flush your lines
After you've got your pipe cut off
You can put some kind of system in there to catch water turn on your irrigation line
Let it spray out any dirt or rocks that may have gotten in the lines. You want to check your fittings for cracks?
This is actually a new one that I had
I'll clean off the other one later, but the fittings they screw right into the bottom of your sprinkler head
You don't have to use any Teflon tape or glue or anything
They screw right in and hold pretty tight
Finger tighten them all the way down. I don't use any tools to tighten them since they are plastic
They could crack fairly easily and now we just have to put our black funny pipe back onto the threads here. They're not really
threads
So whenever you put it on you just kind of have to twist it in but I'll show you that
all right, so when you're putting this back on if you got enough pipe you can put it in and
Screw it back and forth twist it back and forth. If not, you just kind of jam it on there either way works
I'm able to get it just pretty good in right now. I
like to get it as close as I can to the elbow in the pipe and
This one is ready to go. I'm gonna backfill it with dirt and
Replace the sod around it. I'm gonna water in the sod real good so that it doesn't die and
We will see what we have
While you're putting your backfill in make sure that you hold your
irrigation head
upright and
raking
All the loose dirt first and pack it around the system to hold it up before you try to place your sod back in
Kind of compact it around it so that it holds it upright
The the top of your head should either be level with the dirt or just below it because the
The part that actually sprays out the water when you turn on your system
Lifts up out of this existing part
It's just this center cap and that's what lifts up
So you don't want the whole thing sticking out of the ground or you'll have issues running over with your lawnmower or breaking it
I'm just gonna set the sod back in here like it was before
And
I'll test it as is first and then I'll come back and make sure I pack in some sand
And some good soil around it so that this sod will heal quickly
Now that my repair is complete. This is my main
Water line for my irrigation system in the main valve. So I'll give this quarter turn to open the main valve
Then I'll come over to
The valve that controls that zone and I'll give it a quarter turn as well
We'll go check the head and see how it's free
You can see that the head is standing up pretty straight coming out of the ground, which is good
and it appears to be
spraying a normal stream of water
We can turn it to see the alignment is way off
Shooting at my neighbor's house over here
So I can spin the whole head
by hand
To get it adjusted, but you can turn the head
Back and forth so you get it adjusted the direction you need it to be
This is a fairly simple repair if you don't mind getting your hands a little bit dirty
I hope you found this video helpful
And if you did give me a thumbs up and subscribe to my channel
If you want to see a video showing how I fixed my air conditioner
For a very low cost click the video in the top left corner
If you want to see a video showing how to install pine straw like a professional click the video in the top right
I hope you guys have a great day
