Archäologisches Zeichnen: Fundkomplex Urnen Legden-Haulingort (Teil 1)

LWL-Archäologie für Westfalen
1 Abonnent
16 Videoaufrufe·03.10.2023
Es geht weiter mit dem Zeichenblog der LWL-Archäologie!
Die archäologische Zeichnerin Maike Kloss zeigt und erläutert Ihre Arbeit am Zeichentisch. In diesem Video dreht sich alles um eine besonders schöne Urne aus einem Fundkomplex aus Legden-Haulingort.
Wie wird Keramik gezeichnet? Was ist zu beachten und welche Hilfsmittel erleichtern die Arbeit? Auf diese und weitere Fragen erhaltet Ihr in diesem Video eine Antwort.
Lasst uns wissen, wie Euch das Format gefällt und stellt uns Eure Fragen!
I am Maike Kloss.
In today's drawing blog,
I present the Fundkomplex-Uhren
from Leckplen-Hauling-Ort,
which I have drawn,
documented and archived
as an archaeological artist
at the Außenstelle Münster
of the LWL Archaeology in Westphalia.
The Fundkomplex
contains 29 vessels,
22 of which are watches
and 7 vessels.
Among them are
two decorated vessels
and two vessels with handles.
The most beautiful of them,
a decorated urn,
I have chosen to show
how ceramic vessels
are archaeologically documented.
The vessel is drawn
from its most complete,
most beautiful side,
usually in 1 to 1 scale.
Usually only the right half
is drawn,
but with special vessels
it is completely drawn.
First, I create a precise
outline of the urn
with the pencil on transparent paper.
In plastic drawing,
vessels are drawn with ellipses
to show the three-dimensionality.
In archaeological drawing,
a vessel is drawn
with a parallel top and bottom edge.
This has the advantage
that the scientist
then draws all exact dimensions,
such as the height and width
of an object,
from the drawing
without having the object in front.
I draw a baseline.
Then I take a profile comb
with which I grab
the outlines of the urn.
The metal sticks of the comb
can be carefully pushed
onto the urn.
First I grab the bottom,
then the left side
and then the right side.
I mark the seat
and draw the upper line freehand.
To do this, I lay a ruler
on the edge of the urn.
So I can see exactly
how the upper edge is moving.
Where the edge is missing,
I make first markings.
In the next step,
I create a profile drawing
in the outline drawing.
Here, too, I use a tool,
a pliers.
With the pliers,
I determine the strength
of the bottom
by measuring the outer height
and the inner height of the vessel.
The difference then results
in about the strength of the bottom.
I also grab the inside of the vessel
with the profile comb
and thus complete
the inner profile line.
A profile drawing is like
a cut through the vessel,
as if I were, for example,
cutting through an apple in the middle.
Since the vessel is hollow,
I can only look at the outer edge of the urn.
At the profile of a vessel
or an object,
the scientist can at first glance
recognize certain vessels
and typefaces
and thus classify them more easily.
Now I begin
to grasp each individual piece,
each crack.
With the help of a pick,
I can pick up the measure
and transfer it to the drawing.
The exact number of dots
or decorations,
their exact shape
and their exact position are drawn.
In doing so, I orient myself
to the cracks and breaks.
To the outer edge,
I consider the optical
and perspective shortening.
This means that the distances
of the holes are a little smaller
and the lines of the cracks
are a little shorter.
This creates an optically
three-dimensional impression.
The vessel has four
approximately parallel dotted lines.
There is a break on the neck
and on the belly.
The breaks are drawn
parallel to the lower and upper edge
just like the dotted lines.
Between the neck and the belly
on the shoulder there are
six triangular compartments
consisting of a diagonally downward line
from which on the left side
many lines are carved in differently.
Here, too, the exact location
and number of dots are captured.
When the drawing is finished,
the drawing is finished with ink.
To do this, I place another
transparent paper over the drawing.
First, I fix the outer outline
with a rapidograph
in the strength 0.35 mm.
The inner life is modelled
with a rapidograph
in the strength 0.25 mm.
These line strengths are suitable
for archiving and processing
for printing in print media.
The vessel is drawn
only in a black colour,
so to speak.
This is called a line drawing.
The vessel is drawn
as if the light
shines from the top left.
Thus, the brightest
spot on the shoulder is at the top
and the darkest spot
at the bottom right of the ground.
In decoration, a dark shadow edge
on the left and a light edge on the right
are created.
I create an optical plasticity.
If the vessel has a rather
smooth surface,
it is represented by dots
placed at regular intervals.
I represent cracks,
flattened areas or a coarse-grained surface
with different lines
and lines.
I create light and shadow
by differently placed dots.
The surface, structure
and characteristics of the ceramic
are represented as precisely as possible.
Non-existent parts
of the vessel, such as here,
at the top in the middle,
are drawn by dots placed
at regular intervals.
Gradually, I draw
each crack and decoration
from left to right.
I put a thick sheet of paper
under my drawing hand
to prevent the waves
in the paper.
I do the precise modelling
only at the end of the drawing
For the archaeological drawing,
it is a plastic
and at the same time schematic
as well as a scientific
analytical drawing.
This means that it is not
a personally designed drawing,
but a representation
that documents the vessel
as precisely as possible
for scientific purposes.
In addition, the vessels
are reconstructed as fully as possible,
so that a relatively precise
representation of the original
vessel is created,
even if only parts of the vessel
are present.
When the vessel is finished,
I move the transparent to the right
so that the continuation
below appears.
Then I draw the profile
with the 0.35 mm
rapidograph.
Finally, I set a scale
and stamp,
in which I transfer all important information
about the vessel
under the drawing.
Now the drawing is finished
and ready for the next step,
the archiving,
the further processing
to print in print media
or as a final image
in this video.
