ECT202 ANALOG CIRCUITS || RC HPF-STEPINPUT || EC205 || ECT 281 ELECTRONIC CIRCUITS || KTU
Oct 3, 2023
This video explains how RC Highpass Filter responds to step input.
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
Hi all, in the last class we discussed about wave shaping circuits.
In wave shaping circuits, we divided it into two parts, which are linear wave shaping circuits and non-linear wave shaping circuits.
We started with linear wave shaping circuits.
Linear wave shaping circuits are RC circuits using resistor and capacitors.
We are going to learn about linear wave shaping circuits.
In the last class, we learned about RC high pass filter.
How does the RC high pass filter work?
How does the high pass filtering function perform?
We also learned about its frequency characteristics.
Today we are discussing about the response to step input for a RC high pass filter.
How does the RC high pass filter perform for a step input?
We know about the circuit diagram of the RC high pass filter.
How is the circuit diagram of the RC high pass filter?
The circuit diagram consists of a capacitor and a resistor.
This is the circuit diagram of the RC high pass filter.
The circuit diagram of the RC high pass filter consists of a capacitor and a resistor.
Now, we are going to give a step input to the RC high pass filter.
Step input is denoted by U of T.
U of T is equal to 1 for T greater than or equal to 0, 0 otherwise.
This is a unit step function.
Unit step function is U of T.
U of T is equal to T for T greater than or equal to 0, 0 otherwise.
This is a unit step signal.
We are using a unit step signal here.
The amplitude of the unit step signal is taken as V.
If we multiply this signal by V, we get a unit step signal with amplitude V.
U of T is equal to V for T greater than or equal to 0, 0 otherwise.
This is a unit step signal with amplitude V.
Its value is V from 0 to infinity.
Now, we are giving a unit step signal to the input of the RC circuit.
The speciality of the RC circuit is that it cannot oppose sudden changes.
When we give a unit step signal to the input of the RC circuit, its value is V for T greater than or equal to 0, 0 otherwise.
Since the RC circuit cannot oppose sudden changes, the output is V.
This is a unit step signal.
We are giving a unit step signal to the input of the RC circuit.
Its value is V for T greater than or equal to 0, 0 otherwise.
Since the RC circuit cannot oppose sudden changes, the output is V for T greater than or equal to 0, 0 otherwise.
The equation for the output is Vout is equal to Ve raised to minus T divided by RC.
The output has completed more than 95% of 3RC and more than 99% of 5RC.

