ECT281 ELECTRONIC CIRCUITS|| KTU MINOR || TRANSISTOR BIASING
yes sir
ok
what is biasing?
tell me what you know
what is biasing?
which biasing have you heard?
forward and reverse biasing
ah, you have heard forward biasing
and reverse biasing
we are discussing about transistor biasing
ok
we are discussing about transistor biasing
why transistor biasing?
we use transistors for different applications
for example, we use it for amplifiers
we use it for switches
we are using transistors for different applications
when we use transistors for different applications
we have to properly bias them
only then we can use it for different applications
what is biasing?
forward biasing and reverse biasing
is it correct?
but we know transistor have
how many terminals does a transistor have?
three terminals
what is it?
emitter, base, collector
transistor has three terminals
how many junctions does a transistor have?
two junctions
transistor has two junctions
what are those junctions?
emitter base junction and collector base junction
ok, wait
for example, a transistor
you know how a transistor works
this is a transistor
transistor has three terminals
collector terminal, base terminal and emitter terminal
transistor has three terminals
how many junctions does a transistor have?
what are those?
if we draw like this
emitter, base, collector
emitter terminals
how many junctions does a transistor have?
emitter base junction
collector base junction
it means two junctions
for example, junction 1
junction 2
junction 1, junction 2
we base this junction on biasing
for a transistor
we work for different applications
we also know
for a transistor
how many regions of operation does it have?
for a transistor
there are four regions of operation
we operate a transistor in three regions
active region, cut-off region, saturation region and inversion region
for a transistor to work in different regions
we have to bias that transistor
what should we do for a transistor?
we have to bias it
for a transistor to work in active region
transistor's emitter base junction
forward bias and collector base junction
are reverse bias
for a transistor to work in cut-off region
emitter base junction and collector base junction
are reverse bias
for a transistor to work in saturation region
emitter base junction and collector base junction
should be forward bias
for a transistor to work in inversion region
emitter base junction should be reverse bias
collector base junction should be forward bias
this is the junction of a transistor
this emitter base junction
this junction
this emitter base junction
collector base junction
these two junctions
if they are both forward bias
it will work in saturation region
if they are both forward bias
it will work in saturation region
if the emitter base junction and collector base junction
are both reverse bias
if they are both reverse bias
it will work in cut-off region
if the emitter base junction is forward bias
if the collector base junction is reverse bias
it will work in active region
if the emitter base junction is reverse bias
and collector base junction is forward bias
it will work in inversion region
to operate the transistor in these two regions
to operate the transistor in saturation region and cut-off region
transistor will behave as switch
what is it will behave as ?
it will behave as switch
if we operate a transistor in saturation region or cut-off region
in saturation region, the switch is always ON switch
which is normally ON switch
if the switch is in cut-off region
transistor normally works as an off switch.
Now, if a transistor has an emitter-based junction,
collector-based junction, forward bias,
collector-based junction, and reverse bias,
the transistor works in the active region.
The transistor works in the active or linear region.
If a transistor works in the linear region,
the transistor works as an amplifier.
If a transistor works in the linear region,
the transistor works as an amplifier.
If a transistor works in the linear region,
the transistor works as an amplifier.
This is the basic concept of biasing.
You can hear me, right?
Connection comes out.
There is a network issue.
It is getting cut off.
If there is any issue,
please call me.
Otherwise, I will tell you.
These are the four different regions of operation of a transistor.
Have you seen a curve like this?
Have you seen a V-I curve like this?
Have you seen this?
Have you seen an output curve like this?
This is IC.
This is VC.
This is the output curve with collector current, collector emitter voltage.
Have you seen this curve?
You must have seen it in lab workshops.
We call it regions based on this.
This is the saturation.
This is the active portion.
This is the cut off.
This is the inversion.
If you look at the V-I curve,
this is the saturation region.
This is the saturation region.
This is the active region.
This cut off region is for transistor off acivity.
Inversion region is below cut off region.
These are the four different regions of transistor.
Based on the mechanisms in each of these regions,
we can handle transpose accession with applications.
We have q point of the transistor.
We are providing biasing to fix that point
If we fix it in saturation or cut-off, transistor will work as a switch
At the same time, if we fix it in active region, transistor will work as an amplifier
Now, let's see
So, a transistor should be operated in linear region when it is used as an amplifier
The biasing is done
In this output waveform, if we bias it in linear region, transistor will work as an amplifier
Now, let's see what is Q-point
Q-point is a DC load line
This is a DC load line
This is a straight line
We call this DC load line as a straight line
What do we fix in this load line?
We fix Q-point or the operating point of a transistor
We are providing biasing to fix this operating point
What do we do to fix this operating point?
We bias the transistor
If we fix it here, transistor will work in active region
If we fix it here, transistor will work in cut-off region
If we fix it here, transistor will work in saturation region
What do we fix in Q-point?
What do we fix in DC load line?
Now, let's see how to draw a DC load line
Do you know KCL and KVL?
Do you know Kirchhoff current law and Kirchhoff voltage law?
There is no response
Am I there or not?
Yes, I have studied
Let's see
If there is no derivation, it is okay
You have studied to draw this picture
BCC by RC
BCC by RC and
The straight line joining BCC is called DC load line
BCC by RC is collector current
BCC is collector emitter voltage
This is a fixed bias circuit
We apply KVL in input and output
Total voltage is VCC
VCC is total voltage in input and total voltage in output
Total voltage in input is VCC
Total voltage in output is VCC
Let's see the output voltage equation
VCC is applied from here to here
VCC applied from here to here is split into two
Some is lost here and some is lost in transistor
VCC lost here is IC into
Voltage dissipated here is current into resistance
Total voltage VCC is equal to IC into RC
Transistor goes across is collector emitter voltage
That is called VCE
Total VCC is equal to IC into RC plus VCE
If we want to draw DC load line in this diagram
We need to get X coordinate and Y coordinate
If we want to draw DC load line in this diagram
We need to get X coordinate and Y coordinate
To get X axis, we need to get IC
To get Y axis, we need to get X axis
Let's see what is X coordinate
To get X coordinate, we need to get Y axis
Y axis is IC
To get IC, we need to get VCE is equal to VCC
To get VCE, we need to get VCC
To get Y axis, we need to get X coordinate
To get X coordinate, we need to get VCE
To get VCE, we need to get IC is equal to VCC divided by RC
Is it clear?
You can chat
You can put in chat box
If you have any doubt, you can ask
It is important
If you have any doubt, you can ask
That's all for today
To draw DC load line
Draw a circuit
Write the output equation
If it is difficult for you, write it down
VCC is equal to IC, RC plus VCE
When the output is low, this is the output
The voltage is going down here and here
Here is IC, RC and here is VCE
VCC is equal to IC, RC plus VCE
These are the output characteristics of a transistor
We have only studied this in first year
To bring DC load line inside this
We need to get X axis and Y axis
To get X axis, we need to get Y axis
Y axis is IC0
IC0 is VCC is equal to VCE
The value of VCE is VCC
To get Y axis, we need to get VCE0
We need to get VCE0
When we get VCE0, IC is equal to VCC by RC
We got two points
We got VCC by RC
We got VCC
In X axis and Y axis
We are drawing a straight line
When we draw a straight line
That straight line is called DC load line
In this DC load line, we will fix the operating point of a transistor
The operating point of a transistor
Or Q point is fixed in DC load line
If we want to make a transistor work as an amplifier
Where do we fix the DC load line?
Where do we fix?
In which region?
If we want to make a transistor work as an amplifier
What are the regions?
Active region
Saturation region
Cut off region
Inversion region
If we want to make a transistor work as an amplifier
Where do we fix the Q point of a transistor?
In which region?
In active region
We need to fix Q point in active region
If we want to fix Q point in active region
Active region is the middle region
Active region is the middle point of DC load line
If we fix Q point in middle of DC load line
We can make a transistor work as an amplifier
This is the way to fix Q point in DC load line
Which one do we use?
We use BIAS
I hope you understood these things
Now we are going to the next topic
Stabilization factor
Before that I want to say one more thing
If we fix the Q point
We can make a transistor work as an amplifier
If we make a transistor work as an amplifier
There are chances for variations in Q point
One second
Even if we fix Q point like this
Sometimes we don't get proper amplification from Q point
We fix Q point for better amplification
We fix Q point in the middle point
It works as an amplifier
But it doesn't work as an amplifier
Some factors that will change the Q point
There are some factors that will change the Q point
What are those factors?
Temperature
Fluctuations in power
Aging of components
And replacement of active elements
Such as VJT and FET
VJT, FET, etc
We are making a transistor work as an amplifier
It is working properly
Sometimes the temperature variations
Affects the performance parameter of the transistor
The power supply that we are using
If there is any variation in the power supply
The supply voltage is 12V
If the voltage is not enough due to the variation in the power supply
There will be variations in the current and everything
The amplifier will not work properly
Third is aging of components
When we first made a circuit
We used a new transistor
As time goes by
The devices that we use work properly
That is aging of components
Replacement of active elements
When we studied the transistor
We learned that the transistor has a current gain
It has a beta current gain
When you experimented with the current gain in the lab
You will understand
When you do the carriage of a common emitter
Each person gets a different value
Not everyone gets an ideal value
Each person gets a different value
If a transistor is a component of a circuit
If we replace that transistor with another transistor
What happens to the current gain?
Variations occur
These are the factors
Change the Q-point
These are the factors that change the Q-point
Next
These are the factors that change the Q-point
Next
Stabilization factor
When we studied these parameters
Fluctuation in power supply
The variation in power supply
We don't have to go that deep
Because in the power supply that we use
If there is a variation in the voltage given by the KCB
Sometimes we don't have to work the circuit properly
Aging of components
When we use aging of components
The performance will decrease
Replacement of active elements
One active element can be replaced with another transistor
What we mainly concentrate on is
Temperature
What is temperature?
Variations due to temperature
Let's see how it affects the circuit
The variation due to temperature
Should not affect the circuit
What do we do for that?
We study various biasing circuits for that
Voltage divider biasing
Collected base bias
Fixed bias
Various biasing circuits
We use all these biasing circuits
The variation due to temperature
Should not affect the circuit
That's why we use different biasing circuits
The change due to temperature
Changes the parameters of the transistor
Which all parameters are changed?
The changes due to temperature
Changes the parameters of ICO
Changes the parameters of Beta
Changes the parameters of VBE
Which all parameters are changed?
ICO, Beta, VBE
Changes the temperature of these parameters
Let's see how it changes
ICO means leakage current
Leakage current of a transistor
ICO doubles approximately for every 10 degree rise in temperature
For every 10 degree rise in temperature
ICO leakage current doubles
Similarly, VBE
VBE stands for Base Emitter Voltage
VBE stands for Minimum Voltage for a transistor
VBE reduces for every degree rise in temperature
If the temperature is high
The voltage of a transistor should be 0.4
If the voltage is 0.4, it is easy
But before that, the transistor should be switched on
That is VBE
VBE reduces for every 2.5 mV rise in temperature
These two parameters IC0 and VBE are varying
Beta is the corresponding parameter
So, the main item is temperature
The corresponding parameter for temperature is ICO, Beta, VBE
How is the variation of each parameter?
ICO doubles for every 10 degree rise in temperature
VBE reduces for every 2.5 mV rise in temperature
Beta is the corresponding parameter
What is the stability factor?
The stability factor is to maintain the Q-point stable
There are three stability factors
S, S' and S''
S is the stability factor
S is the variation of collector current
Transistor is a current controlled device
Variation occurs for the output current of the transistor
Variation occurs for the IC
Variation occurs for the collector current
If the stability factor is S
What is the variation of the collector current through the leakage current ICO?
ICO is the variation of the collector current through the leakage current
If the stability factor is S
Dou Ic divided by Dou Ic
Instead of Dou, we can give the symbol Delta
Delta Ic divided by Delta Ic
The stability factor S is defined as
Variation of collector current with variation in ICO
Variation occurs when VBE is changed
VBE is changed with 2.5 mV depending on the degree
The next stability factor is S' or SV
What is SV?
SV is Dou Ic divided by Dou VBE
The change in the base emitter voltage corresponds to the change in the collector current
This is the ratio
The next stability factor is S' or SV
How is it?
VBE is Dou Ic divided by Dou VBE
These three factors vary the collector current
Variation occurs for the total collector current
Total Delta Ic
Delta Ic is equal to S into Delta Ic
Delta Ic is equal to S' into Delta VBE
The total collector current variation corresponds to
S' into Delta Ic plus S' into Delta VBE plus S' into Delta VBE
The lowest value of S is unity
This is the total collector current variation
This is the stability factor
When we do biasing
We can learn different types of biasing
We can learn different biasing techniques
Is it clear so far?
Please chat
I am saying this to know if you are sleeping
Everyone should respond
Is it clear so far?
Ok
Let's see different biasing techniques
What is biasing for?
We do biasing to fix two point, chosen point or operating point
There are two types of biasing
Single power supply and dual power supply
You can learn single power supply only
Biasing using single power supply and dual power supply
Different biasing schemes are
Fixed Bias, Collector to Base Bias, Voltage Divider Bias
These three are different biasing schemes
First, let's see Fixed Bias
Fixed Bias is the simplest biasing circuit
You can draw this circuit
Fixed Bias is the simplest biasing circuit
The specialty of this is VCC
Fixed Bias is
This VCC voltage is directly given to the base of this transistor
By a resistor called RB
This VCC voltage is not a constant voltage
It is a constant voltage
It is given to the base of this transistor
Fixed Bias is for this kind of circuit
VCC is the transistor is driven from VCC through RB
The resistor is suitably selected to ensure proper region of operation for the transistor
Next, you have to learn the stability factor of this
You don't have any derivation, so you don't have to learn this
You have to learn this one
In the case of Fixed Bias, stability factor is
S is equal to dou IC by dou IC naught
This is mainly found
Dou IC by dou IC naught is beta plus 1
In the case of Fixed Bias, the value of the stability factor is beta plus 1
The next biasing scheme is Collector to Base Bias
The difference between this and the other is
When it was Fixed Bias, we gave a resistor from VCC to the base of the transistor
When it was Collector to Base Bias, we gave a resistor from the collector of the transistor to the base of the transistor
In the case of Collector to Base Bias, the base is biased from the collector rather than VCC
That is the main difference
Don't draw both the circuits
The main difference is
The transistor is given to the base of the transistor from the collector
The transistor is not given to the base of the transistor from the VCC
This is Collector to Base Bias
In the case of Collector to Base Bias, the stability factor is
The stability factor is
S is equal to dou IC by dou IC naught is equal to beta plus 1 divided by 1 plus beta RC by RC plus RB
Please understand this equation
The stability factor is
beta plus 1 divided by 1 plus beta RC divided by RC plus RB
In the other case, S is equal to beta plus 1
The value of S is beta plus 1
If beta is equal to 100, then S is equal to 101
In this case, S is equal to 101 beta plus 1 divided by 1 plus something
The stability factor is less than Collector to Base Bias
The stability factor is more when compared to Collector to Base Bias
The stability factor is less when compared to Collector to Base Bias
The stability factor is more when compared to Collector to Base Bias
The next circuit is Voltage Divider Bias
Voltage Divider Bias is the circuit used for derivation
In Voltage Divider Bias, we are using a potential divider circuit
R1 and R2 are Voltage Divider or Potential Divider Circuits
RC is Collector Resistance
RE is Resistance for Thermal Stability
R1 and R2 are Voltage Divider Circuits
RC is Collector Resistance for Gain Control
RE is Resistance for Thermal Stability
The reason for Potential Divider is
We are giving a voltage Vcc
Only one portion of this Vcc will come to the base
The portion coming to the base is
Vcc into R2 divided by R1 plus R2
That is the voltage coming to the base region of the transistor
Only a fraction of this voltage is coming to the base region
That is why we call this circuit as Voltage Divider Circuits
In this case, the stability factor is
Beta plus 1 divided by 1 plus Beta Re divided by Re plus Re
Stability factor is
The value of S will be less
That is why most commonly used in Amplifier Circuits is
This circuit
Because it has more advantages like Thermally Stable
More Thermal Stability Circuits are Voltage Applied Amplifier Circuits
These are the three advantages of Voltage Applied Amplifier Circuits
Another advantage of Voltage Applied Amplifier Circuits is
Thermal Runaway Circuits
Thermal Runaway Circuits are used for
Transistor Current Conduction
Current Conduction is increased due to Airways Leakage
Finally, Transistor is damaged
This is called Thermal Runaway Circuits
From this Thermal Runaway Circuits
RE is used for Thermal Stabilization
RE is used for Thermal Runaway Circuits
So, Voltage Applied Amplifier Circuits are most commonly used
Voltage Applied Amplifier Circuits
Disadvantages of Voltage Applied Amplifier Circuits are
Parallel Combination Circuits
R1 and R2
These are the disadvantages of Voltage Applied Amplifier Circuits
Most commonly used in Amplifier Circuits is
Voltage Applied Amplifier Circuits
Fixed Bias, Self Bias, Voltage Divided Bias
Derivation is not required
Thank you for watching

