RC HIGHPASS FILTER TO PULSE INPUT || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, today we are going to discuss how an RC high pass filter responds to a pulse input.
How an RC circuit behaves to pulse input signal.
We have studied the step signal and square wave response of a high pass filter.
For those who have studied the step signal and square wave response of a high pass filter,
you can easily understand how an RC circuit responds to a pulse input signal.
Those who have not seen that video, please watch that video and then attend this class.
First, let us see the circuit diagram of a high pass filter to pulse input.
This is the circuit diagram of an RC high pass filter.
First, we have a capacitor and then a resistor.
This is the circuit diagram of an RC high pass filter.
Here, we have an input signal and an output signal.
Here, we have a resistor and a capacitor.
A current flows through this and that current is taken as I current.
The input signal we are giving here is a pulse input.
What is a pulse input?
To give a pulse input, the input signal will be like this.
This is the diagram of a pulse input.
This is a pulse input.
This is an input with a voltage amplitude of V and a pulse width of T and P.
We need to know what a pulse input signal is.
We can define a pulse input signal.
What is V input?
For 0, for T less than 0.
Its value is V for 0 less than or equal to T less than or equal to T P.
0 for T greater than T P.
We have defined the pulse input.
Its value is V for 0 to T P.
Its value is 0 to minus infinity.
Its value is 0 to T P.
You know how to form a pulse signal.
How to form a pulse signal?
A pulse signal can be formed by using two step signals.
Let me show you how to form a pulse signal.
This is a step signal.
This is U of T.
This is the first step signal.
Its value is V amplitude.
I have drawn a signal called U of T with a value of V amplitude.
I am drawing the next step signal.
This is U of T.
The amplitude of this step signal is minus V amplitude.
The signal with a value of minus V amplitude starts from here.
This is T P.
Its value is 1 from T P to infinity.
I am taking two step signals.
U of T is equal to V for T greater than or equal to 0.
U of T is equal to minus V.
I am drawing the next step signal.
Its value is minus V for T greater than or equal to T P.
This signal was delayed by a T P time interval.
Similarly, I am drawing a unit step signal with a value of minus V amplitude.
If we add these two signals, we get the pulse signal.
If we add these two signals, we get the pulse input.
I have defined the pulse input here.
V is equal to 0 for T less than or equal to 0.
V for 0 less than T less than or equal to T P.
Similarly, 0 for T greater than T P.
Now, let us see how the circuit behaves when this input is given to the circuit.
First, we apply the input signal.
I am drawing a V out here.
First, we get minus infinity from 0.
The value of 0 is not given in this signal.
At this point, a positive V value is given.
We have learnt that a capacitor cannot oppose sudden or instant changes.
In the time period 0, the input voltage changes to V.
The sudden increase occurs at the output side.
The output voltage is V.
In the time interval 0, the output voltage is V.
A capacitor cannot oppose sudden or instant changes.
Otherwise, the capacitor will act like a short circuit.
The time 0 changes to V.
Similarly, the output side changes to V.
At this particular time, when T is equal to 0, the output voltage is V.
Now, let us look at the first case.
Case 1 is T is equal to 0.
At T is equal to 0, the capacitor does not oppose sudden or instant changes.
Case 1 is T is equal to 0.
There is a positive step at the input.
Since the voltage across the capacitor cannot change instantaneously,
the changes in the input appear at the output in totality.
Hence, output at T is equal to 0 is V.
Now, let us look at the second case.
Case 2 is between 0 and T.
Between 0 and T, the positive step at the input is V.
In the time interval 0, the output voltage is V.
The output voltage is greater than the capacitor voltage.
Hence, the capacitor starts charging.
The output voltage is greater than the capacitor voltage.
Otherwise, the input voltage is greater than the capacitor voltage.
Hence, the output voltage is greater than the capacitor voltage.
The output voltage is greater than the capacitor voltage.
Hence, the output voltage is greater than the capacitor voltage.
Hence, the output voltage was exponentially decayed.
So, this is the same thing that we got when we gave the step signal.
So, we have done the expression of the same output voltage that we got when we gave the
step signal.
So, we can define this case 2.
Let us look at case 2.
Case 2 is at t is equal to 0 less than t less than tp.
At 0, the capacitor charges towards V and voltage across R decays exponentially.
Vout is equal to V raised to minus t divided by RC.
Let us look at case 3.
Case 3 is at t is equal to 0 less than t less than tp.
At 0, the capacitor charges towards V and voltage across R decays exponentially.
Vout is equal to V raised to minus tp divided by RC.
Let us look at case 4.
Case 4 is at t is equal to 0 less than tp.
At 0, the capacitor charges towards V and voltage across R decays exponentially.
Vout is equal to V raised to minus tp divided by RC.
Let us look at case 5.
Case 5 is at t is equal to 0 less than tp.
At 0, the capacitor charges towards V and voltage across R decays exponentially.
Vout is equal to V raised to minus tp divided by RC.
Let us look at case 6.
Case 6 is at t is equal to 0 less than tp.
Vout is equal to V raised to minus tp divided by RC.
The total time interval is T.
Vout is equal to V raised to minus tp divided by RC.
This is the working of the pulse input to a RC high pass filter.
This is the working of the pulse input to a RC high pass filder
Now, we should know one more thing about this.
We should know how to change the response time interval.
Now, we have to know the RC time constant.
RC time constant is very much greater than TP.
This is TP.
RC is too much greater than TP.
RC is too much less than TP.
We know that RC is a time constant.
If the RC is very much greater than TP,
the capacitor will charge very slowly and will discharge very slowly.
The output waveform that we get is
when the pulse input is positive,
the capacitor will charge and the output will decay.
If the pulse width is more,
if the RC is more,
the capacitor will charge very slowly.
The output will decay very slowly.
That is why we get an output waveform like this in RC greater than TP.
Now, look here. RC is very much less than TP.
RC is very much less than TP.
If the RC time constant is less,
the capacitor will behave very fast.
The capacitor will charge and discharge very fast.
Then we give a pulse input.
This is our input pulse.
When we give the input pulse,
we said that the capacitor charges and the output decays.
Then the capacitor charges very fast here.
The output will also decay very fast.
Here, the output reached zero very fast.
In the next half cycle,
we can see that the capacitor charges very fast.
If the RC pulse input time constant is very less,
if the RC is very much less than TP,
we will get a spike wave.
We will get a spike.
When we give the pulse input,
we will get a spike.
If it is somewhere else,
we will get a very slow signal like this.
So, today we discussed that the pulse input is given to the RC circuit.
When we give the pulse input,
the circuit behaves like this.
The waveform we get will be in this shape.
I hope everyone understood this class.
I have conducted this as a tutorial session.
We have already discussed about the square wave and step signal.
So, you can do this separately.
Similarly, you can give an exponential signal as an input.
You can give a ramp signal.
We know many signals.
You have studied elementary signals.
We can give those elementary signals as an input.
When we give the pulse input,
the circuit behaves like this.
I hope everyone understood this class.
See you in the next lecture.

