WIENBRIDGE OSCILLATOR || HARLEY OSCILLATOR || ECT281 ELECTRONIC CIRCUITS|| KTU MINOR
Oct 4, 2023
This Lecture contains Wien Bridge Oscillator and Harley Oscillator
In the syllabus, you are given Wainbridge Oscillators, Handley Oscillators and Crystal Oscillators.
I think you have studied the RC Phase Shift Oscillator in the first year.
So, you are not given the RC Phase Shift Oscillator in the syllabus.
Similarly, you are not given the Colpitts Oscillator in the syllabus.
You have to study only these three oscillators.
These are Wainbridge Oscillator, Handley Oscillator and Crystal Oscillator.
You have to study only these three oscillators.
So, let us see Wainbridge Oscillator.
You have to study the circuit diagram properly.
It is a sure question.
There are chances that Wainbridge Oscillator will ask you 80% of the questions.
Marko Kudela is for the circuit diagram.
Because you do not need derivations.
You have said in the syllabus that you do not need to study the derivations.
You do not need to study the derivations found in the frequency of oscillation.
So, the most important thing for you is the circuit diagram.
You have to study the circuit diagram properly.
So, Wainbridge Oscillator.
Wainbridge Oscillator is an RC Oscillator.
What is RC Oscillator?
It is an Audio Frequency Oscillator.
As we said earlier, RC Oscillator is an Oscillator used for low frequency applications.
So, what is an RC Oscillator?
It is an Audio Frequency Oscillator.
RC Oscillator has a name.
When it becomes an RC Oscillator, we are using resistors and capacitors in its feedback.
RC network is used in the feedback path.
The signal generated by this is a sinusoidal signal.
What is the sinusoidal signal that is generated?
It generates a sinusoidal signal.
In the last class, we discussed about two-stage RC coupled amplifiers or cascading amplifiers.
That is, one is an RC common emitter amplifier and the other is a common emitter amplifier from its output.
We learned how to connect two stages.
Here, in Wainbridge Oscillator, we are using two-stage RC coupled amplifiers.
This is a transistor.
This is R1 and R2.
This is voltage divider biasing.
RC is the collector resistance.
RE is the emitter resistance.
It is not used in the first stage.
The output of this is used as the input for the next RC coupled amplifier.
In the next stage, we are using voltage divider biasing R1 and R2.
This is a transistor.
RC is the collector resistance.
RE is the emitter resistance.
This is RE for thermal stability.
These are the things that we discussed earlier.
This is the amplifier part from here to here.
There are two-stage RC coupled amplifiers in this.
This is the first stage and this is the second stage.
Here, we are using two-stage RC coupled amplifiers.
The second condition of the Barkhusen criteria that we have to achieve is the angle of Aβ is equal to 360 degrees.
When we connect the 360 degree phase shift to these two RC coupled stages,
the feedback network should not give us any phase shift.
The phase shift of the feedback network should be zero.
So, we are using a Wainbridge circuit at the feedback path.
This circuit does not give us any phase shift.
In order to avoid phase shift, we have a series of resistors and capacitors here.
We have a parallel resistor and capacitor here.
The phase shift of the two RC coupled stages cancels out.
We get a zero degree phase shift.
This is the feedback network.
This is the feedback network of this circuit.
Now, let us see whether it came from the output.
See, it went to the feedback network.
Now, we have to connect this feedback network to the input.
We have connected the feedback network from this point to the input of the first stage.
This point is connected to the emitter of this transistor and this point is connected to the RC.
This is correct.
Everyone can draw and study this today.
This is the circuit diagram of an RC Wainbridge oscillator.
This is the RC Wainbridge oscillator.
RC Wainbridge oscillator is an audio frequency oscillator.
It uses the principle with RC network in feedback path and generates sinusoidal output.
This is my circuit diagram.
It contains two stage RC coupled amplifiers.
This is the first stage and this is the second stage.
A common emitter amplifier introduces 180 degree phase shift.
One is 180 and the other is 180.
So, total 360 Barkhusan criteria is satisfied.
So, angle of A beta is equal to 360 Barkhusan criteria is satisfied.
So, our feedback path will not produce any phase shift.
So, we are using a Wainbridge circuit in the feedback path, RC Wainbridge circuit.
So, we are using a Wainbridge circuit in the feedback path.
This series and this parallelometer will produce zero phase shift.
We are using this to control the gain.
So, study this connection properly.
This is the circuit diagram and this is the working of RC Wainbridge oscillator.
The frequency of oscillation produced by the RC Wainbridge oscillator is f is equal to 1 by 2 pi RC.
Study this equation and the frequency of oscillation equation.
Advantages of Wainbridge oscillator over RC phase shift oscillator.
Advantages of RC phase shift oscillator.
The amplitude of the output waveform, the output voltage can be continuously varied.
The frequency of oscillation can be varied by varying capacities of feedback network using a 2 stage GaN condenser instead of 3 stage GaN in RC phase shift oscillator.
The third advantage is a sample sort of amplitude stabilization is possible just by using sensor in place of R4 or by using thermistor in place of R3.
These are the main advantages of RC Wainbridge oscillator.
This is a circuit diagram of Hadley oscillator.
This is an RF oscillator.
Hadley oscillator is an RF or radio frequency oscillator.
We classify based on the frequency of oscillation.
Hadley oscillator is an example of a radio frequency oscillator.
We have used an LC tank circuit in the feedback.
We have used an inductron capacitor tank circuit in the feedback.
This is an LC network L1, L2.
This is an IFT, Intermediate Frequency Tuned.
You have not done this in the lab.
You will be coming to the lab.
If you come to the lab, you will learn this.
This is an IFT.
We have used RC in place of RC.
This is a common emitter amplifier.
This is R1, R2.
This is a transistor.
This is a resistor called RE.
This is a bypass capacitor called CE.
This is a common emitter amplifier.
RC is a common emitter amplifier.
We have placed an RC resistor in it.
We have connected an IFT like this.
Once L1 and L2 have joined C, we have connected it as an IFT.
We have connected a terminal to VCC.
And then another terminal is C-B which is a block capacitor
which is connected to L2 as input for transistor.
This is the Feedback Network and this is the Amplifier Session.
This is the Transistor Input.
This is the Audio Tone Generating Circuits for Code Practice, Telephone, etc.
This is the Frequency of Oscillation Equation.
This is the Frequency of Oscillation of Hadley Oscillator.
This is the Transconductance of Transistor.
R is the Resistance used in Load.
That is greater than or equal to L2 by L1.
Rπ is the Internal Input Resistance of the Transistor.
Rπ is the Internal Input Resistance of a Transistor.
Rπ is greater than or equal to L1 by L2.
This is the Working of Hadley Oscillator.

