I found this weird table and restored it.

Restore all old things
33 followers
hello beautiful people and welcome to another video I've got this weird old
table that I found on Facebook marketplace that someone painted half of
it just the top and the paint is supposed to imitate stone I think so
it's got texture but this table has lots of issues there are some bits that are
broken lots of missing pieces of veneer and generally it just needs a lot of TLC
looks like there was an apron or something attached underneath but it's
completely missing so I can only guess to make it easier for myself I'm going
to take the legs off it will also make gluing these two boards together much
easier I'm just using my marking knife to have a gap between those two boards
so I can get some glue in and that's way too much glue but oh well I'll clean it
up in a minute this is the main problem as you can see there's a huge crack and
fortunately there are only small bits of wood missing so just gluing these parts
together and using some wood filler should do the trick because of the shape
of the top I couldn't simply use a clamp to clamp those two boards together so I
temporarily attached two pieces of plywood by using CA glue and activator
and that gave me a nice and flat surface for my clamp and when everything was dry
as you can see it was pretty easy to get those pieces of plywood off okay let's
take the paint off I was actually quite curious to see what's underneath I knew
it was some sort of veneer but I didn't know what kind and because the base of
this table is not veneered it's just mahogany or actually I think it's a mix of
mahogany and sapele I just wanted to see what I was working with I used carbide
scraper and a card scraper or a furniture scraper I think some people
call it to remove the varnish and it came off quite easily I was very careful
with the corners because the veneer was quite fragile and lots of pieces were
missing so I didn't want to damage it anymore and when I was done with that
the shop inspector came to give me the initial approval for the project there
were lots of dents and scratches in the veneer and some of them were quite deep
so I decided to use some moisture and just a regular iron to raise the grain
and make it easier for myself to sand the veneer when you think about it this
is what plants do they transport water from the roots to the top of the plant
and that's what happens when you apply water to the wood grain it absorbs it
and it expands and even though it's not alive anymore it you know this still
works so when you have a dent you put in some water add some heat to make it a
bit quicker and it expands it raises the grains and it makes it easier to sand so
you don't risk sanding through the veneer and this way you can fix quite a
lot of scratches and dents I also use some transparent wood glue and some sawdust
to help me fill in those little gaps between panels and the veneer I could
have used wood filler but this just looks better because you know the sawdust
comes from the wood that you're working with so it's the same color these are
all the pieces of veneer that I have left over from previous projects plus
some veneer that I buy and I didn't have anything that would exactly match the
veneer on this table for obvious reasons because this is very irregular and
unusual but I decided to go with a piece of walnut veneer because it already had
some vertical stripes that kind of matched what was on the veneer and I
knew that with a little bit of help and some tricks I could make it work there
were lots of very small imperfections in the veneer and I didn't want to replace
them with veneer because I don't think that would have actually looked better
so I just used some wood filler and for the pieces that were loose I used CA glue
and activator to attach them I'm not going to show you all the repairs
because there were just too many of them but that's basically what I did if there
was a gap like this one or maybe a bit smaller I used a piece of veneer and if
it was something very tiny I just used wood filler as you can imagine when you
work with old furniture and you source it from places like Facebook marketplace
you can't exactly pick and choose and sometimes there just isn't anything
interesting available and that's kind of what it feels like that the last month
or so has been like but I have found some pretty interesting pieces and the
next couple projects will be very cool so stay tuned for that and as always I
wanted to say huge thank you to everyone who supports the channel because this
means a lot whether it's via BuyMeACoffee by hitting the super thanks
button or simply by liking commenting or subscribing it really means a lot and
I really appreciate it I'm not just saying that and for those of you guys
who don't know subscribing is free but the reason people always ask for that is
because I think that sometimes YouTube just unsubscribes you from the channel
that you used to watch because that happened to me and things that I used to
watch a lot I just don't see any videos anymore so I need to search for them
specifically otherwise I won't find them and obviously with the algorithm it just
helps to place my video amongst all the millions of other videos and help people
find it so yeah thank you for that if you're a regular viewer to my channel
you know that I often use whatever is available when I'm sanding or removing
varnish and in many cases like this when you have irregular shapes and like
very difficult to reach places I just use whatever works so there is no wrong
and right method and you know works for me so you do you if you think that there
is a better way but that's just what I do I've always found it quite interesting
and slightly amusing how people get upset about doing things certain way
when it comes to woodworking I mean come on this is just a piece of furniture
that you're working with and you're trying to do your best not everyone is a
trained woodworker and even if you are there is not necessarily just one way of
doing things just do your best as long as you're happy with the results
two thousand years later this is probably a good example of how you can do the same
in many different ways and some people would simply use paint stripper and a
brush and try to do it this way but not everyone wants to pay for paint stripper
or deal with the chemicals or has a way to dispose of it so I try to show many
different ways of doing the same thing so people in different circumstances can
do the same thing there was a piece of this decorative element missing so I use
my dental tool and a little bit of wood filler and I shaped it too much the rest
of those bits and it worked again just one way of doing it those screws were a
bit rusty so I just used a wire brush to clean them up and make them look a bit
shinier because I was not going to take that piece apart for those of you who
say that it takes a long time between videos this is why I can't really get
anything done because all those cats I'm just kidding I love them but yeah they
do come around quite often and they distract me from work and as you can see
I absolutely hate it this bottom stretcher thing had a very irregular
shape so I just use my sandblaster to clean it up because otherwise it would
have been quite difficult to do it with a sandpaper maybe not difficult but more
time-consuming I find this oddly satisfying it feels a little bit like
doing dental work but it worked very well and yeah it was actually quite fun
and pay attention to different colors of the wood because this will matter later
on as you know I'm the biggest fan of sanding so this is just one of my cool
little tools that comes very handy for areas like this one
after getting the final approval from the cut inspector I use 180 grit
sandpaper to get rid of all the scratches and the leftover glue and saw
dust and some wood filler there were still some tiny bits of white paint deep
in the grain so I just used this very precise dental tool to get rid of them
and for those couple deeper holes in the veneer I just used some UV resin and UV
light to cure it and that was a pretty simple fix for the edge of the table to
make sure I didn't go through the veneer I did all the sanding by hand and
as it's usually the case I like to sand and clean the bottoms of all the pieces
that I work with so that's what I did for this one and now I can address the
veneer repairs that I've done and try to blend them in even more so as you
remember I used walnut veneer for the repairs and the veneer has different
color from the veneer used on this table and to help it blend in a bit more
I'm just using some water-based wood dye and giving it some color and as you can
see this is already getting much closer to the rest of the veneer but I'm not
done yet I did that for all the repairs that I've made as a base for the next
step so this is almost dry and it's looking pretty good I mean not exactly
the same color but it's pretty close I may do another coat so this is the big
piece that I replaced and it's already pretty nicely blended in I mean you can
hardly tell that this is a different piece of veneer but what I'm gonna do
I'm just kind of try to imitate the same vertical lines in different shades
to blend it in even more so I'm just gonna add a drop of black into this dye
just to get a different shade and just so you know I cannot draw to save my
life so this is something that I've never felt comfortable doing but there
is really not a right or wrong way of doing it as long as it looks kind of
like the rest of the veneer if you didn't know this has been replaced you
would not know this looks really good I'm pretty happy with it this is wet
because I just applied mineral spirit or white spirit just to see what it looks
like and see if there are any scratches and there were some patches of light
wood but it's not because I sanded through the veneer it just looks like
there are layers of color in the grain and I don't know it just looks a bit odd
so I'm gonna try and fix this with a little bit of dark mahogany stain and
I've been just basically very lightly trying to add some color into these
patches and in case this works I just want to film it so you guys know what I
did if it doesn't work well it already looks much better because it was
definitely lighter and you could easily see it's much much better now so I hope
it looks okay once I apply the finish and I'm also blending the edges with a
piece of cloth that has some white spirit on it just to make sure there's
no sharp edges let's hope it works I couldn't decide for the longest time
what to do as far as the finish but I ended up choosing polyurethane and I
probably should have used wood filler but I didn't have any so I just applied
polyurethane directly to the wood and because it's quite porous you can see
the grain despite me using five coats of polyurethane and I wanted to get this
video out so I didn't have more time to apply another couple coats and I will do
it after the video is out but just so you understand that if you can see a
little bit of wood grain showing through the finish that's why but it is very
glossy it is very nice and shiny and I'm quite happy with it if you remember
I mentioned that the base is made from different colors of wood and I'll
address that in a minute but I'm just spraying a base coat of polyurethane
first as you can see I applied several coats of polyurethane and it's looking
pretty gorgeous I did give it a little bit of light sanding between the second
and the third coat just to make sure there were no specks of dust or anything
stuck in the finish and this is my plan how to fix the problem of different
colors of wood I'm gonna use lacquer toner and I'm gonna start with mahogany
color just to give those bottom pieces a little bit of red because otherwise it
would have been quite difficult to blend them in with the rest of it and then I'm
gonna use walnut color on top of mahogany and this just gave me the best
result and this is not an exact science and you basically try and see what works
and I was pretty happy with how it came out I was basically going back and
forth between those two colors until I was pretty happy with the blend and I
felt like all the pieces look the same I'm pretty much done with the project
and before you see the final results as always comment like and subscribe if you
enjoyed the video and if you're feeling super generous you can hit the super
thanks button and I'll love you forever you guys have a wonderful week and see
you in the next video
