We got a Snap-on® rechargeable flashlight about 3 years back and we’ve used it A LOT. It’s a great flashlight. Nothing’s perfect - so what needs to be improved?
We use this light quite a bit, so that tells you that it works well in a variety of conditions. It’s a great handheld flashlight, but it really shines (see what I did there?) as a stationary unit that can be attached to any ferrous (iron-based) surface and the light directed where you need it.
It is magnetic both at the bottom and side of the unit. You can turn on the end light (like a typically hand-held flashlight), or turn that off and use one or two sides of the wand light that can be extended out the side of the light. Using a combination of magnet sources and which light you are using, it’s pretty easy to get an area illuminated.
At a price point approaching $200, it better be good - and it is. But it would only be worthwhile if it is used ongoing, and serves well in a variety of work conditions - including where there is a lot of dust, mud, grease, or grime. With the rubber moldings covering the unit, it makes it quite durable so it can be wiped down or cleaned.
Its shape resists rolling, like off a car hood. If it does roll, the magnetic side is likely to grab.
It is charged using a standard USB-C cable. When charging, the status light will flash green. When fully charged, it is solid green. When the charge in the unit is getting low, or you are drawing a lot of current (when both sides of the wand light are on), the status color will be yellow. It holds a charge well, and in over 2 years, we’ve seen only a slight diminishment in the charge capacity.
What do we think could be improved? One thing we think would be an improvement is if the status light would flash when the charge is getting really low and charging is needed right away. The new version description says that it has a power level indicator, so perhaps that has been resolved. Also, as it is now if you swing out the wand light, the front light can’t be used. I’d like the choice to use the front light when it is pivoted and I want more of a spotlight directed at what I want to look at. It’s not a deal-breaker as far as I’m concerned, but it would be a nice choice to have.
If after all the benefits we’ve stated, this is still too much, there are alternatives. This is a professional unit, and it’s build shows it. We’ve had several viewers who are mechanics write and tell us how much they use this light and highly recommend it. Since it is an industrial model, it has an industrial price.
There are “knock-offs” out there and they will work well for most homeowner settings. Pure economics dictate they won’t last as long, but that may be okay. Another approach is to use a headlamp device. They are getting better and better and put light where you are looking. There are several models and companies out there, and depending on the type of work you do, that may be the right choice for you.
Light output is 600 lumens using a single side of the light wand, and 800 lumens when using both. The single-end spotlight puts out 300 lumens. For comparison, a 100-watt light bulb emits about 1600 lumens, a 60-watt bulb puts out about 800 lumens, and a 40-watt bulb produces about 450 lumens. To get one, you can visit https://shop.snapon.com/product/Articulating/Dual-Sided-Flex-Light-(Green)/ECARD062G.
THE BOTTOM LINE? You’ll need to make the determination if your investment is worth it for this tool, but one thing is for sure. Great lighting, conveniently “on tap” when and where you need it, sure makes it easier to JUST DO IT YOURSELF.
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Almost three years ago, we did a review on this
professional grade snap-on rechargeable flashlight. Did it live up to the hype? Hey, stay tuned and
I'll tell you about it. Dirt Farmer Jay from DirtFarmerJay.com. We said when we did the review
on this originally, we'd come back a year later. So here are some of the features of this. First
of all, it's a regular flashlight. So if I put that on, I can blind you pretty good with that,
can't I? Well, it's been almost three time passes, but we want to let you know whether or not this
flashlight has really lived up to the hype and the expectations we had for it in that review.
Now, if you want to see that review, you can just look at the link above, pause this,
go over and watch it, and we'll give you a comprehensive review of it as well as the uses
that we use and all the different ways that we do use it around the farm here. And at the end
of the video, you can just stick around if you want. We'll pitch it over there as well so you can
just take a look at that original, which has a lot more detail than this. But let's just hit a couple
high points on this. As you can see, cosmetically, we've used it a lot out around in the grounds here
as well as in the shop and more than once, several times in emergency lighting situations or
where we're out kind of an area and we need to illuminate an area like a dining tent or the tent
before we go to bed for the night, that sort of thing. This flashlight does some cool things
because of its different configurations. As a professional tool, it's going to live in a hardened
environment, especially if you are a mechanic or something like this. Well, with the overmolding on
it and all that, it cleans up pretty well and it feels good in the hand. It's easy to hold on to,
even when your hands get greasy or it's wet outside, it does a great job. So we give that a
thumbs up. That has lived up to the expectation. The other thing is the battery charging capacity
on this. This uses a standard USB port that you just plug in there using a USB cable and through
one of your plug-ins. And so this gets charged up there and the indicator light that's right there
changes from yellow to green when it's fully charged. The third area is the magnets. You have
a very strong magnet on the end of the unit that allows it to stand off a wall or flat on it. And
we found that those magnets have not diminished at all. They still work very hard. There's no
problems with them popping through or anything like that. All right. So after nearly three years
of use, is there anything that we'd like improved? Yeah. There's two things that we think could be
improvements. One is the indicator lights right here. So the only thing that gives you a clue
that you're getting low on power is when that drops from green to yellow and gives you a caution
light and says, hey, you better watch out. But it doesn't really give you a fuel gauge that says how
close you're getting and if you need to run back some place or grab another flashlight or whatever
before it goes out. So a little bit more help that way. Now my understanding is the newer version of
this actually has a fuel gauge. So it sounds like they recognize the issue and solved it on the new
edition. The second thing that I think could be a real improvement is there's different lighting
configurations on this. So you have a side wand that you can use to light down like that.
Or you can take it and stand it up and light an area. You can hit one side or the other.
Or I could light up both sides, which is great for emergency lighting. Or you can hang it for a
food area tent or something like that to give general lighting in there. And it works pretty
well. So I like that. But here's the problem that I see that should be overcome. And that is,
if I am using the end, just a regular LED, there's my light. And it's a more focused light that I'm
pointing at something. I can't move that end around to aim against something. Let's suppose
if I had it off the end of a table. And I wanted to aim that beam over there. I was working
something. Watch what happens when I raise that. It kicks off. You are not given the option.
As soon as you start to open the wand, this end LED is no longer usable. Well, that means I can't
use it off the edge of a table. I can't stick it someplace and put the beam where I really want it.
I can't put it over the edge of a table and point it up someplace that I'm working on to
illuminate a ceiling area, all that. That option has been taken away from me. And you end up using
the general lighting. So that's something I wish they would work on to improve as well.
Now there are, in all fairness, other options out there. At nearly $185, this is a professional tool.
And if you read the comments in the early review, you're going to find this is fairly polarizing.
People that use these tools for their living or professional mechanics, not only in the garage,
but in the field, they tend to really love this tool. It's durable. It lasts a long time. The
magnets are strong. There's more than one story of forgetting the flashlight that was stuck and
finding a hundred miles away, the flashlight's riding along, waiting for them to retrieve it.
The side also resists rolling. So people really like that. So that's going to tend on a curved
hood and that sort of thing, not to roll as easy. But for $185, in all fairness, there are other
options. You can certainly go up and buy knockoffs of this that have some of the same features,
but the law of economics kicks in. You need to make a decision. Do you want to buy a less
expensive one, replace it more often, or do you want one that's going to last years and years?
As promised, here is that earlier review we did almost three years ago.
We'll give you a lot more detail on how we use it, some of the practical ways.
And while you're at it, check out this other video from our catalog that YouTube
thinks is a perfect match to your interests. And we think you're going to enjoy it too.
And until the next time, this is Dirt Farmer Jay from DirtFarmerJay.com.