Setting Up a Complete Drip System for Raised Beds from a Hose Faucet! 💦🌿 // Garden Answer

Tips for spruce up your garden
218 followers
11 Video Views·Apr 27, 2023
Hey guys, how's it going?
Today we're back at my sister-in-law's house
to continue with our vegetable garden project.
We're kind of doing this in phases.
So the first phase was the hedge of arborvitaes
behind the greenhouse and the greenhouse setup.
Second phase were the raised beds.
We got those all set up and filled in.
And the four little decorative containers set up and planted.
Before we continue on with the fun stuff,
the pretty stuff for this space,
we do need to take a moment
and work on the water infrastructure
because especially in an area like ours
where we don't receive a ton of just natural rainfall
through the summer months,
setting up a drip system is just huge.
You know, plants benefit from consistency.
They also benefit from water at the root level
rather than watering from overhead.
And I also think it's really important
to set spaces up like this
in a way that you can really enjoy them
so they don't become a huge chore.
So you're not dragging a hose out
and having to water once or twice a day
when it's 100 degrees for weeks on end
during the middle of summer.
So that's what we're gonna work on today.
We would like to show you
how we're gonna set up a drip system
to these raised beds, to the containers,
and to the row of arborvitaes behind the greenhouse.
And we're gonna be running this all from a hose faucet.
So you can see the faucet here
that runs from outside the house.
That's the closest water to this space.
I think we've got all the pieces and parts we need.
We actually came yesterday
and kind of made a roadmap in our minds
of how we were gonna put it together
and what we would need.
So I think we have ourselves together.
But we'll show you everything.
All the little parts and pieces.
We'll show you how we're running it
to each individual bed.
And they will all go off on a timer.
So Alyssa won't have to,
I mean, you wanna make sure
you're looking at stuff every day
in case something malfunctions,
because that is possible.
But she won't have to, you know,
get a hose out every day.
It should go off consistently
at the same time every day.
That's our hope.
Let's start with all the pieces
that we're gonna be using right here
at the beginning, at the hose faucet.
Because, you know, there's a patio behind me
and the raised bed garden is in front of me.
And she's probably gonna have some containers
on her patio that she'll still need to water.
And she'll have other things
she wants to take a hose to.
So we really want to be able
to have the drip system set up
and on a timer so that it will run consistently,
but also a way to use a regular hose.
So we've got this Y right here.
Now you can do it this way,
or you can get a timer like this
that has multiple outputs.
But what happens with those,
sometimes they will mess up internally
and start to leak.
We've had it happen before.
These are a lot more expensive to replace
than just replacing a Y like this.
So we're gonna start with this.
Next piece is this little brass 45.
Now this is completely unnecessary,
but what this will do,
see when I connect it here,
it's going to make all of our network of parts
go down more tidy instead of coming straight off
and looking kind of wonky.
And I don't know if it helps like with weight
and torque and things like that
on this part and helps it.
But I like to think it does,
probably does nothing.
Next step is our timer.
This is just a Gilmore battery-operated timer.
Okay, the next thing we need to do
is we need to put a backflow preventer on.
That's what this little black piece is right here.
And you'll notice,
I'm not sure you'll be able to see on the camera,
but there is an arrow on this piece
and that is indicating which way the water flows.
So we need to point the arrow down
in the way the water is gonna go down.
So this part right here is pretty important
because it eliminates anything getting back up
into the water system.
I think some cities even require it.
You have to have it.
Aaron, I might need you to tighten all these pieces up
when I'm done.
I'm trying to get them as tight as possible.
After that, we need our pressure regulator.
Now, it's gonna be different
depending on what kind of drip tubing
you're gonna be using.
If you're using regular like round drip tubing
with the holes every 12 or 18 inches,
you want the 25 PSI pressure regulator.
We decided to go with drip tape in these beds
because we've had such phenomenal luck with drip tape
and it's a lot less expensive,
but you do need to use a 10 PSI.
Or I think you can find them like 8, 10, or 12.
You just wanna be in that range,
not at the regular 25.
We'll put that on.
Okay, so we've got everything that we need up to this point.
You know, the timer, the backflow preventer,
the pressure regulator.
Now we need to adapt from the 3 1⁄4 inch hose size
down to 1⁄2 inch black poly tubing.
So this is the adapter right here.
We're gonna be putting our black poly tubing.
I just brought a little piece over just as an example,
but we'll be running this tubing underneath the grass
over to the garden space
and then we'll be spidering off of that to all of our beds.
The thing about it though
is that all of these pieces have hose thread
and there's a difference between hose thread and pipe thread
which that refers to this part right here,
like how they screw together.
In our area, now they could exist,
we just don't know about it,
but we cannot find adapters that have hose thread.
So that requires us to have this little piece right here,
which takes us from hose thread, which is just wider.
I'm not sure if you can see if you get really close.
See the hose thread right there
has got a wider spacing than pipe thread,
much closer together.
So I couldn't go and put a piece like this
onto a hose thread and have it line up properly.
We'd have leak problems everywhere.
So we're gonna take it from three quarter inch hose thread,
just looks like so many little pieces,
down to our three quarter inch pipe thread
so that we don't have extra leaking.
Oh, for crying out loud.
Okay, here we go.
Now we can come in with our drip tubing,
which Erin, do you have a silver clamp?
Okay, so what we would do here is we would attach,
we're gonna take this all off
just because it's a little easier to attach our drip tubing
because you can see we're kind of close to the ground,
but how we'll attach it
is we will have this little silver clamp,
we'll push the drip tubing up onto this adapter,
and then we use this pair of clamps right here.
Crimpers.
And we'll crimp this black tubing
onto this adapter right here.
But what we're gonna do first
is we're gonna dig about six inches down
so we have a little bit more flex
and so we can hide our tubing.
We're gonna dig around this day lily,
which I should probably clean up.
We'll dig around
and then we're gonna dig underneath the curbing
and we're gonna go straight
toward the vegetable garden over there.
Clear as mud.
Does that make sense?
I hope it does.
I'm such a visual person,
I have to see things as they line up.
And it is a very huge network of pieces
that can be a little bit confusing,
especially if you're just getting going.
So I hope it was helpful to see that.
So I think what we need to do at this point
is just get our drip tubing over to the garden space
and then we will stop and explain again
what we're gonna do to get it to all the beds.
Quick update.
We started digging right here,
dug about six inches down underneath the concrete curbing
and then we just take a wedge of grass.
You can see Aaron is stepping it back into place.
But if you take a wedge like that
and just kind of flip it up on the existing lawn,
then you can run your tubing in there.
We also ran a heavy duty extension cord.
We're gonna bury that in a trench
all the way to the greenhouse
so that Alyssa can have patio lights or a heater
or whatever she would like in there.
So this part right here,
we actually will not tackle until the very end.
We'll make all the connections at the end.
We did put a figure eight ender on this
so that when we ran it through underneath the curbing,
it wouldn't get any soil in it.
So this is where we're at right now.
So what we need to do is run two separate lines
down each one of these kind of networks of beds.
So there will be a line running this way.
We'll put a T in right here.
We'll cut the line, put a T in
so we can run another line this way.
And then we'll probably just put an elbow here
so that we can run a line down this way.
And then we will T off of that
and go underneath each one of these beds to the top.
So we got us some trenching to do yet.
So we do have a metal tooth rake.
One of us will probably rake the gravel away
while the other one trenches.
And we don't have to bury this super deep in this area,
but just enough to where it's not gonna pop back up.
How many inches?
Four?
Oh, two or three.
Oh, I like that.
All right, let's do it.
All right, guys, a little update.
We've made a pretty good progress.
We got the whole thing trenched
wherever we needed that half inch supply line.
We ran that and then we went ahead
and set the first bed up on drip
so I could show you kind of how we're doing it
before we cover the trenches in or fill the trenches in.
First off, you can see the half inch supply line
coming underneath that curbing.
So that's where we just filled the grass back in.
It comes up here and then there's a T,
so a T coupler, so that we could take off down this side.
It also runs right in front of them.
And then in this corner, we have an elbow
and it runs all the way down back to the arborvitaes.
So we set this first three by three raised bed up.
What we did, and we're gonna do this
along the whole line of drip.
So like when we get ready to do this three by six,
we'll access it right down here and make our cut.
But we cut it, we put in another T coupler.
We use the clamps to clamp the half inch supply line
down to the coupler.
And then we went up underneath this box.
So it comes to this corner right here.
Then we put in another elbow, ran our line to the end.
We used a figure eight ender here just to crimp it
so that that's where the water stops.
And then this is how the drip tape works.
So there's these little valves,
which you can get them that have these little on-offs,
which is so handy.
I love that feature.
They're a little bit more money, but totally worth it.
Yeah, even if you don't plan to use them,
I would suggest getting these because you never know.
So you can turn off, like if you say grow a crop
and you've harvested all of this side,
but you haven't harvested this side.
Well, you can shut the water off to this side
and not waste the water
and still water your crop that's in here.
So the drip tape just slides right onto this connector,
which I will show you here in a second.
I saved one of our beds so that I could demonstrate,
but it slides on and then this little thing screws
onto the tape and holds it fast.
And then it runs to the end.
And then we've got a little ender here.
If this gets plugged in any way,
there is like this thing spins off
and you can blow the water line out if needed,
just to clear it out.
But all of the emitter holes,
they are every six inches and you have to face them up.
So they kind of water up
and then like seep out into the soil.
It seems like it should be the opposite way.
Like the holes should face down
because you want to water the soil, which is down.
But if any sediment gets in the lines,
it always settles at the bottom of the tube or drip tape.
And if the emitter holes are sitting there on the bottom,
that sediment can clog them up really easily.
So having them weep up and then out just makes more sense.
It keeps the lines clear.
So when Aaron was working on the trench,
he pretty much did all the digging around this area.
I got all of the drip tape prepped.
So I got all of the couplers put here and the enders.
Enders are a little bit different.
We ran out of the fancy one.
So we're just using these little crimpers.
But let me demonstrate what you do.
So you cut your drip tape the length that you need it.
And then on one end,
this is what the coupler looks like
without the drip tape on it.
And make sure that this is screwed all the way up
as far as it'll go.
This slides on just like that.
And I make sure to have the line or the hole,
rather the emitter hole line up with this
because you want all of that to be on the upper side.
And then you just screw this down
and it locks that tape in place.
And then on the very end,
what you do, there's a bigger side and a skinnier side.
You run the tape up through the skinnier side.
You can see an emitter hole right there.
And I'm gonna do a tri-fold.
Aaron, you were saying some people do four folds.
I don't know how they get them to fit in here.
I can barely get three to fit in here.
Just like that.
So there's three folds inside there.
It just crimps it so that the water stops.
These are definitely more streamlined,
like tidier looking than those big clunky ones.
But the other ones are nice
because they have that release valve on the end.
Anyway, that's how you do it.
Let me show you the punching tool.
So this is how you attach your drip tape to your supply line.
You figure out where you want it,
which it's kind of nice because it's,
did I get that centered?
Almost, almost centered.
You find where you want your hole
and you just pop a hole in it with this.
And then these just pop right in.
It takes a little bit of oomph, but it's not too hard.
One other thing I wanted to show you,
this line that's running on the outer side,
we ended it right here.
You can see the extension cord
going into the greenhouse at this point as well.
That way, if Alyssa wants to have drip in here
for any reason, she can tap into it easily.
Also, I'm gonna need to tap into it today
to run water to our pots.
Okay, so we've got seven beds
and four containers to run drip to.
So we're just gonna get after it and get it done.
All right, guys, we got it all done.
So drip has been run to the arborvitae hedge,
to the four containers that have plants in them already,
and to all seven of the raised beds.
Now Erin is out there just hosing down where we trenched.
You can see right here, we made a little bit of a mess.
In fact, we had already planned on
kind of as a finishing touch to come in
and bring a new layer of gravel
because it was looking a little rough in patches anyway.
So we weren't super careful,
but it is good if you've trenched to kind of wet them down
because it helps settle everything.
That way we know if there's any low spots,
if we need to add any extra.
But, oh, look at all of the drip.
That, for those of us who don't live in an area
with a ton of rain, just looks so, what's the word, Erin?
Relieving?
Yeah, relieving.
Relieving is the word.
Just knowing that everything's gonna get proper water.
Oh my goodness.
Now, we did not run the drip underneath the containers.
In fact, as we were buttoning up
the raised bed project last week,
I thought, oh my gosh, we didn't run.
Like, I knew we were gonna be running drip to everything.
I just forgot that step.
So it was a little bit extra, you know,
to dig out the soil away from the edge of the beds
and run our drip tube down,
but it wasn't that big of a deal.
And honestly, since there's black gravel in here,
you know, when we bring the new layer in,
we'll just make sure it's covered.
So it's tapped into our main line right here,
and then it goes right up behind this container.
For the arborvitaes, now we did leave
kind of a long tail here
because I do plan on putting a container
and possibly that dwarf nectarine tree
I picked up earlier this spring.
I think that would be perfect for this space.
But Erin came along and put two,
two gallon per hour emitters for every arborvitae.
So there's one on every side of it, either side of it.
Probably a good idea to test what we've done today.
In fact, we just said, maybe we should have tested it
before we covered up all the trenches.
We haven't turned it on yet.
I fully expect for a one or two,
or maybe more of these to pop off
because sometimes I can't get these in there very tight.
Oh, I can hear it.
I hear it.
Do you guys hear it?
Yes.
Look, there's water.
Oh, yay.
Oh, look at this.
There's water coming out of those.
See that?
So you see how it just kind of puddles up on the top
and then goes over the side.
Oh, hold on.
This one is needing tightening.
There we go.
None of them popped off, Erin.
You gotta be kidding me.
Okay, so the water is going over here.
Yep, they're fully.
This one is not.
Oh, this one's kind of closed.
There it is.
And this one's closed.
See how these two are going?
There's water coming out.
There.
Nice.
Erin, they're all working and not a single one popped off.
Okay, let's check out these containers.
Yep.
Water's coming out of that drip tubing.
Oh, I forgot to show you.
We used the brown quarter inch drip tube
that has holes every six inches.
And we made sure there was five holes per pot.
I think we only need to use four holes per pot,
but we always start with a little bit extra
because you can cut it down fairly easy.
Now let's check the Arborvitaes.
Yep, they are running.
Oh, is that one not open, the valve?
You gotta kind of hold on to the end.
They're kind of tough.
Yeah.
There we go.
Isn't that awesome?
Yay.
Now I cannot wait to see what Alyssa plants
in these raised beds.
She's already got some seedlings going in the greenhouse.
Well, she has them in the house.
And then she brings them out to the greenhouse
during the day, so they get a lot of light.
We're still reaching freezing
and even like temps in the high 20s at this point.
So with this unheated structure, they'd probably be okay,
but it's just safer to put them inside
unless you're running a space heater,
which you could do now
that there's an extension cord in there.
We still have quite a bit left to do in this space.
We've got a fence and arbors, a fire pit,
stuff to put inside the greenhouse,
just all kinds of fun stuff.
So we will be back here probably in the next few days
to do, what is this?
This is phase three, so we'll be here for phase four.
So I hope this video was helpful
just seeing how we run drip from a hose faucet.
We did have to go a little bit of a distance.
If you had to go any further than we went today,
I mean, you could rent a trencher
that would make life a little bit easier.
But doing what we did today was pretty manageable.
So I think that's it, you guys.
Thank you so much for watching.
Hope you enjoyed it,
and we will see you in the next video.
Bye.
