How To Setup Drip Irrigation For Your Raised Beds

True Gardeners
273 followers
The day is finally here where I am installing the final leg of my irrigation, which is actually
putting drip irrigation into my raised beds. Now I did promise this a long time ago. This won't be
the complete video showing you how to plumb all the PVC, set up all your timers, everything like
that. That is still unfortunately a project that I am kind of neglecting and I need your guys'
encouragement if I'm ever going to finish it. But I wanted to show you guys at least how to
plumb up your irrigation once you're at your raised bed. So that's what we're going to go
over today. I'm also going to do a little of the expansion for some of the in-ground irrigation
back there because my giant cabbage field is almost ready to harvest. And then there's also
going to be tomatoes going in there. I need to get an irrigation solution in place. We're going
to do a little bits and bobs, irrigation for trees, irrigation and ground, irrigation for raised beds.
We're going to cover it all today in this video, but we're going to start with this 4x8 bed. Now
every bed I'm probably going to do a little different because I'm trying to test out different
methods, different formats to set up irrigation to see what is really my favorite and what I'd
like to recommend to you guys the most. The first one here is going to be the most traditional. I'm
going to be setting up standard drip tubing like this guy right here. So let's get right into it.
Now really quickly before I install the irrigation, if you're wondering what these are, these are our
critter cages. I decided to put over my tomatoes here because this bed has literally been dug up
I think six times by raccoons. I know it's raccoons because I set up a GoPro time-lapse
here the other night. I caught them in the act, but if I had not put these critter cages here
I would not only not have any of my lettuce or spinach, only looks like six of my lettuce
survived the onslaught of the raccoons, but I would have also lost these tomatoes that I just
put in. I already lost the majority of the cauliflower, only two remain from the four that I
originally planted in here. So I'm definitely going to put these back on, but for now we're going to
get them out of our way so we can install this irrigation system because I want all the space
that I could possibly get. The first thing before we start plumbing up the irrigation is I need to
set up my actual main line. So this is PVC hooked up to my timer. What I'm going to do is trim it to
a height so that this is sitting just at the surface of the bed there. Now I'm not going to
glue it until the very end just so I could have a little bit of wiggle room and play around with
things, but I already know that right about here is where I need to cut this PVC. So let's go ahead
and do a dry fitting just like that. So I will eventually have to cut this a little shorter.
It's sitting a little high right now, but that's good enough for us to start actually stringing up
our irrigation. If you guys have hooked up this sort of irrigation before, you know that this can
be quite hard to get onto the fittings. A couple tips here is you could just leave it out in the sun
for at least 30 minutes before you start working, which is what I did. And if it's still too hard,
you can get yourself a hot cup of water, put it in a thermos, dip this tubing in the hot water for like
a couple seconds, maybe 10-15 seconds. That'll soften it up. You could slip it on and then when
it cools down, it'll tighten up again on your fitting. Since I left this out in the sun, I'm not
too worried. It should be able to slide it on. The other trick I like to do is wiggle back and forth.
You're not just pushing straight in. If you wiggle it a little bit, it's going to work its way down
those barbs. So the idea here is that I want to come in right at this corner and make use of the
curvature of the birdies raised beds since it's already there. So I'm going to try to angle it.
So right here, I like the way this is curving. Now I am going to be cutting this into little sections,
but for now what I'm going to try to do is just stake this down so I can now mentally
plan out where I'm going to attach everything. So the way I'm going to do this is use these
tees. I'm going to set them up roughly where I think I'm going to be pulling a line from.
For now, I just want to lay some out, get a visual. For a 4x8 bed here, at the very minimum,
I'm going to want to pull a line every single foot. So a minimum of four lines in this bed.
But realistically, closer to like eight inches and running this for a shorter period of time
is more of what I want. When you're thinking about setting up drip irrigation, you have to
remember that when it drips, that drip of water comes down and it spreads out a little bit. And
that width of the spread of water depends on the soil you're using. When you're using raised bed
soil, you tend to have a lot of drainage. So that drip of water is not going to travel very far.
Rather than having a bunch of widely spaced different drip lines, I want to actually put
them a little bit closer together. That way you could have more flexibility when you plant this
bed out. You're not just relying on, for example, where a single drip emitter is where you could
plant. You want a nice full coverage so you could direct seed into this bed. You could plant smaller
things like lettuces throughout here without missing a drip irrigation line. And so that's
why I'm going to actually probably shoot for about eight inch spacing. And then each emitter is going
to be spaced at, I believe, six inches between drip points. And we're going to talk about how
we actually set that up as well. So I'm going to go grab a tape measure because I want to get this
setup as right as possible. And the way we're going to space out this regular old drip line
is about eight inches apart from each line. The reason why we're going that close together
is because we want really good coverage across this bed. If you think about a raised bed soil
mix, it's going to be very quickly draining. So anytime you put a drop of water in it,
it's not going to travel out very far. Maybe it'll travel at the maximum four inches apart
from where that drip is. And that is why we're going for something like eight inches. Now,
the poorer the drainage is of your soil, the further apart you could space your lines because
that poor drainage means that that water drop is going to slowly work its way into the soil
and start spreading out. If you have very sandy soil, for example, that drip of water is going
to go straight through, probably not spreading very much at all. So think about that when you're
setting up your irrigation. What kind of soil do you have? Is it fast draining? Is it slow draining?
And also think about how you're going to use this bed. For example, right now I have mostly
tomatoes in here, so I don't need that good of a coverage of water. But let's say I wanted to plant
this entirely in bush beans or entirely in lettuce. I'm going to want really good coverage of water
across this bed because those plants aren't going to send out roots as aggressively as a larger
plant like a tomato. So by having more lines across this bed, I could have better distribution
of water through the soil. And in exchange, I could just water for a shorter amount of time
instead of having fewer lines and running it for longer. So that's the basic setup here. We're
going to do about six inches from the inside of every side of the bed here. So six from there,
six from here, and then eight inches between each one of these lines. So a total of one, two, three,
four, five drip lines for a four foot wide bed. Now the next thing we're going to do is cut this line
right here, attach these fittings, and then start running our actual drip emitter line. When it comes
to cutting drip line, I just like using pruning shears. They seem to work really well for me.
So let's go ahead and cut this first one. As I install these emitters, I'm going to go ahead
and put a stake down right around it because I don't want it to slide every single time I cut it.
Remember, you've got to wiggle it like this and it'll go in much easier, especially now that,
like I said, it's been sitting in the sun. It's also going to be a whole lot easier to install.
And our final irrigation line I forgot to mention, but it's actually going to be
a corner connector, not a T, because we are finishing the line here. We don't want it to
continue out towards the edge of the bed, and that's going to complete our main line setup
for this bed. Now let's go ahead and grab the tubing and start running all these lines.
I'm also going to install some sprinklers, which I'll set up after we set up that main
line irrigation. To make this whole process easy, I'm going to put a stack of staples at the end
there. Then I'm going to come down here and grab the start of my line. I'm going to go ahead and
attach it right here. All right, let's run this line out to the end. Now we're going to move on
to another bed. I'm going to let these lines sort of relax in the heat of the sun before we finish
up this bed, just because they're so annoying right now, all curled up. So we'll be right back
here, but let's go ahead and set up one of these 4x4 beds. So for this bed, since it's only a 2x4
bed, I don't want to spend too much time setting up complicated main lines or everything like that.
So I'm just going to be pulling straight off the T using one of these two-way manifolds. So what it
is, it's just two little green things coming out the top. You screw it onto your PVC adapter.
This is what's now going to be attached to my PVC stub out, which is right there. And then what I
could do is I could actually pull two drip lines or a drip line and a sprinkler off of this. I
actually already set up the bed over there. I'll show you in a second with a four-way manifold. So
that one has three drip lines and one sprayer. But let's go ahead and install this guy. I'm
going to have to cut this so it's nice and level. Before I actually glue this in, I'll have to come
back in, clean the PVC so it's a nice clean connection. But now all we have to do is install
our drip line. So let me go ahead and grab this. This is six inch emitter drip line. This is a
quarter inch line, which is the thickness of the actual tubing. The last one was supposedly half
inch, but it definitely looks bigger than this. So all I need to do here is hook it into one of
these little green guys, push it all the way to the end. And sort of the way I've envisioned this
is I'm going to have one of these lines wrapping around the outside perimeter. So actually one
thing I need to grab are some staples. So I'm going to go ahead, start right there and start
distributing this line out. Basically you want to put a staple every time you turn the line.
That's going to keep it from scrolling away from you from the actual location you want it in. So if
I put it right here, now I could bend it and I'll have this radius here protected as I pull the line
through the rest of the bed. And then what I think I'm going to do here is actually stop it
right here at the edge of where the next one's going to start. So you'll see exactly what I mean
in a moment here. Let me cut that and attach this last line. I think this system is actually quite
nice. If you don't have a very big bed, you don't want to deal with setting up a bunch of connectors.
It's just one thing with a bunch of little connections on there. And from it, you could pull,
in theory, I saw one that goes up to eight different splits. That would be a little bit
crazy looking. But for a bed like this, I'm actually really happy with the solution. The
last thing I need to do is close off those lines. So I have what are called these little goof plugs.
They're just plugs that are designed to fit into irrigation lines or holes. Like if you goofed up
and you added a sprinkler line and now you want to remove it, this is what you would use to seal up
that hole. So I'm going to go right there and there we go. That was honestly the fastest, easiest
irrigation I've ever set up for a raised bed. Just pull a couple of lines and you're done. And with
six inch spacing, this is going to have very even water distribution throughout. I don't even need
like a sprinkler if I wanted to germinate, say a bunch of carrot seeds. With something like this,
I feel pretty confident that I would get good enough water distribution to start just about
anything. And now in this bed, I actually do have plans of putting in some potatoes, but yeah,
this bed's ready to go. Let me show you the four by four. It's the same basic idea, except it's a
four-way manifold instead of the two-way. So here we are in the four by four birdies bed where I
have the four-way split manifold. So I have one line that wraps all the way around the outside,
another one that takes the inner loop, and then the last one here completes this inside section.
Since I didn't think I needed the fourth one, what I decided to do over here is actually add in a
sprinkler. So this is one of those vortex sprayers that just sprays a mist of water. That's going to
be ideal if I want to germinate a bunch of little tiny things in here or just make sure everything
in here gets nice and wet. Like let's say it's a really hot day, I want to cool down the plants a
little bit. I would go ahead and open this up just like that. If I don't need it, I just simply twist
it shut and now this is not going to do anything while the rest of the drip lines work. So honestly,
I'm pretty happy with these guys. We'll see how they hold up over time, but very easy setup,
very simple. I'm quite pleased with it. Before I move on to the in-ground irrigation expansion,
I wanted to go ahead and start PVC gluing these parts together. Now the PVC glue will be a permanent
connection. It's also going to make sure this doesn't pop off when I turn it on. It is important
that you wipe the pipe itself and actually the piece that you're connecting onto it. Any like
little grain of sand or anything like that can cause a leak or at least potentially cause a leak.
So what I'm going to do is now get my primer. It's the purple stuff. What this does is it softens the
PVC pipe, makes it easier to sort of make the connection. It also makes that bond stronger.
What it does is it's essentially melting that plastic a little bit. Then I'm going to come in
with the actual cement. It's hard to not put too much. There we go. One wrap like that. That's
actually probably too much cement, but it's okay. This isn't a critical connection here. I do like
to wiggle it when I put it on to make sure that it's all nice and spread. Any extra drips like
that right there, I'm going to go ahead and wipe away. So this should set, like I said,
about 30 minutes and we'll come back, run the system and see how it works. Before we turn on
the water and test the system, I have to close off the ends of these half inch drip tubes. So
there's two different ways you could get a made closure like this guy here. The reason why I don't
like these is because first of all, they're expensive. They add up very quickly when you
start closing each line. And also they add a lot of extra length to the end of your build. So if I
wanted a drip emitter right here, I wouldn't be able to do it. I'd have to push it like all the
way back here. So for me, they're less flexible and they're more expensive, but I'll show you how
to do it anyway. It's the same system as anything else. All you have to do is come in, push it on
just like that. And then you twist this part here and that's going to seal that tube up against that
actual connection mechanism. So there you go. It's a very clean look guaranteed to work,
but I just don't like having to pay for it. Now, the other option is to just use some
electrical tape. This is something I picked up from a farmer. I think it was from a farming podcast,
but the idea here is that you take the end of your drip tube, like this guy here,
you fold it over. The nice thing about this is that you could fold over a very small section
and this will still work. I have drip lines that I've sealed like this, like three years ago,
and they're still holding up just fine. You take your electrical tape and you start wrapping. The
nice thing about electrical tape is that it's very stretchy, which means that you can pull it
super tight up against this line, which will guarantee that that's not going to actually
drip any water at any point. It's going to be well-sealed and last for a long time, but you
want to make sure you put a lot of wraps on just to protect it from degradation and the sun and
things like that. So I'm going to go ahead and do a lot of tight wraps now all the way up to the
back end. And there we go. That is a now fully sealed drip line ready to go and drip some water.
So I'm going to go ahead and close these off and then we'll go turn this on and see if it works.
While we wait for the PVC cement to actually cure, let's go ahead and start building out
the irrigation to my giant cabbage patch. So over here is where the main line comes up out
of the ground. I did bury this and run it under the pathway here, comes up to here,
splits out of T to a on and off valve, which goes to this bed, which is my pollinator patch.
And then previously I had run this out to the garden itself, but when I cut it out to redo
this area for the greenhouse, I just went ahead and attached it back to the actual pollinator patch.
That was just like a easy way to set it aside and forget about it for a while. So now what we need
to do though, is come back into here, cut out that connection to the pollinator patch, and then
reassert that line back into the garden. So first thing I'm going to do here is actually just go
ahead and cut this part out. And then what I'll do here is actually use one of those more fancy
closures, just because I don't want to worry about it down here. I just want to set it and forget it.
I'm never going to look at this and it might get overgrown. So I'd rather have a fully
100% permanent solution. Let's go ahead and seal that off. So now I have this connection closed off
and all I'm going to do here is take a straight connector and jam that into this side, just like
that. Now that that's in, we could go ahead and attach another section of the mainline tubing.
And now we're ready to go add some lines to this area over here. Now we've attached that new main
line off the original one. And what we're going to do here is I've actually tucked it in to this
whale. I built this whale about a couple months ago to capture runoff water from my greenhouse
roof and divert it back into the garden. The way this works is that this is all a basin full of
wood chips. And then when the water floods it, it helps irrigate my garden as well. But we're not
going to get rain for probably at least 10 months from now or something like that. Here in San Diego,
March is pretty much the end of the rainy season. We might get a little bit in April and one or two
random showers in the summer, but I'm not counting on rain for the rest of the year from this point
forward. So what I'm going to do here is once I'm done installing the irrigation is bury this line
up with extra wood chips, just to give it a better visual look. And also this needs to get replenished
anyway. So the goal here with the onions is I have one, two, three, four rows of onions. And what I
want to do here is just run a individual quarter inch drip line for each row of onions. This is
the exact same stuff as the other one, except that it happens to be black because my local retailer
carries that, but it's quarter inch line with six inch spacing between the emitters. So all I need
to do now, just take my hole punch, punch a hole right here. And then I always make sure I put the
barb onto the quarter inch line first, because it's easier to do that and then push it in rather
than put the barb in and then try to get the hose on it. So I'm going to go ahead and attach this,
boop, just like that. And I'm going to run it all the way down to the end of the bed where I'm going
to then plug it up with one of those little goof plugs, like I showed you earlier. So I'm going to
do this four times, fill out this onion section. Then we'll move on to the cabbage region and also
a fruit tree that I installed back there and do something a little bit different for those guys.
So we're not actually going to be adding any irrigation to the giant cabbages here because
they're already basically mature. If I were to add a bunch of irrigation water right now, what would
happen is that they'd crack and split open and be sort of ruined. But we do need to actually add
irrigation to the tree right back there. That's the tree that I planted in that how to grow a
fruit tree faster video where I did the multi-year hold method and I haven't added irrigation to it.
So let's go ahead and take a look back there and see a couple different solutions on how to do that.
We're down here at the edge of the cabbage patch where I have leftover line. This is that same line
that we actually pulled the irrigation for the onions off of, but it was a little extra. So I
decided to just wrap it around the bed instead of cut it short so I could do things like exactly
what we're about to do right now, which is add a sprinkler to that fruit tree. So by having it back
here, I'm able to bring water to the furthest edge of my garden where otherwise it'd be actually
pretty challenging to bring water to this tree. So what I have here is a three-way connector. So
that's a barb with one, two, three. One of them is going to go into that main line and then attached to
that same setup is I have two shutoff valves. These are going to do two different things for me.
First of all, I could toggle them on or off if I don't want the sprinklers running. And also I might
be able to just turn them halfway on if the flow on the sprinkler is a little bit too intense and
spraying too far. At least that's my hope here. So I've already made a hole right here in the line.
I'm going to go ahead and punch that right in like so. And so like I mentioned, I have two
different styles of sprinkler here. This is the one that I'm hoping I'm going to be attaching to the
tree. I actually don't remember the details on these, but both of them are 360 degree, which
means that they'll spray in a circle. So this guy's going to come up here and go at the base of this
fruit tree. And we'll see how far that actually runs. And then this one, I'm going to be running
into that hugelkultur patch so I can water my wheat. So we now have all the irrigation set up.
I want to actually test it to see what all of this looks like and whether it actually works.
As I mentioned, it's the end of the day and all the irrigation is now in place. I've turned it on.
So let's walk around and see how it's working. First up is the 4x8 bed. This is the first bed
that we did. And right here, I wanted to show you guys exactly why you space out your irrigation
emitters. So they're not all in a straight line. So right here I have a wet zone, down here I have
one, and over there. So now this section is not going to remain dry, whereas if I had the emitters
right next to each other, every other spot in between would be drier. So that's why you want
to offset the lines when you install it. This is going to be wonderful. I already put the cages
back on to stop those raccoons and I can't wait to see this bed do really well. So just for context,
the back is all determinate tomatoes, a couple cauliflower, and over here I'm going to put in
probably four indeterminate tomatoes. So now let's take a look at these beds where we set up the
four-way manifold system. So there it is right there. And this is also working really wonderfully.
This one is spraying a little bit loose, a little bit wild, but perfect distribution across the bed.
And if we need it to germinate, like let's say I put a bunch of carrots in here,
I just turn that guy on and this is now spraying all over the bed on a nice even misting layer. So
that's going to be wonderful for germination. That's the goal there. And then down here we have
the 2x4 bed, which you can also see all those little dark spots. Those are just perfect little
drips. So this is going to have perfect coverage of water. A lot of happy plants are going to be
grown in here. I can't wait to see how this does. So here's where we connected back into the main
line and we jumped into the swale where I pulled four quarter inch lines off into the onions. So
now it's definitely getting water. You could see all the wet spots in between. Now I have a chance
of actually growing some big onions, maybe not as big as these cabbages, but pretty dang big
nevertheless. So this line then comes down here, wraps its way all the way around the bed. And once
I harvest these cabbages at the end of this week, I'll be putting two of those lines, two of the
lines right here, the same ones that we did in that 4x8 bed back over there. The idea is that
I want this to be very well watered for the tomatoes that are going to go in here. I'm going to probably
have one row there and one row there. I did give this area a whole year break without tomatoes,
so I'm hoping that's enough. And now there is one of the sprinklers for the tree. So there's the
fruit tree. And if I come down here, this is where that little shutoff valve is. So I could just turn
it off. Now that sprinkler's off and then I could just flip it back on if I wanted to. The same goes
for this patch over here. I don't know if you see that little sprinkle coming through. I could just
toggle that off if I want my wheat to not get any more water or crank it if I want that to get
plenty. The idea is that this wheat patch is not going to want water once this starts to actually
turn golden brown, like fully golden brown. I'm going to want to not actually add too much water
here because that's going to make the wheat crop worse. So for now I can run this, but as soon as
this starts to turn brown, I'll turn it off. So there's raised bed irrigation and also a couple
little side quests to expand my irrigation by the cabbage patch. Now please leave comments if you
complete guide on how to install PVC, how to install timers, zones, all that stuff. I have
all the footage. I just haven't been motivated to organize it all because I recorded a lot. I wanted
it to be an extremely thorough guide for you guys. So if some people were to watch that,
they'd basically be able to tackle setting up an entire backyard with irrigation if they wanted to.
So thanks for watching. Any questions, put them down below.
