How to Build a Mini RAISED BED Using ONE PALLET, FREE Backyard Gardening!

Tips for spruce up your garden
218 followers
What's going on growers? It's James Pagione coming to you live from Jersey. Today me and
Tucker are going to show you how to easily take one pallet and turn it into a mini raised bed. Let's go!
First thing we need to do is collect the pallet. Ideally we want one with a stamp on it that says
HT. That stands for heat treated. We do not want one with a stamp that has MB on it. That stands
for methyl bromide and it's toxic. What I did was went to my local recycling center and fortunately
they had a bunch of pallets stacked up. They allowed me to grab one. This made it so I could
select a good one. I think it's worth taking a little bit of time to find a pallet that's quality.
It will make building your bed a lot easier. Instead of trying to use a pry bar and popping
the nails out like this, that's going to be a lot of work. Plus it will increase the chances of us
splitting the wood. We don't want to do that. Instead we're just going to take a skill saw
and then run this skill saw basically as close as we can up against these nails without hitting them.
This will make it a lot easier, a lot quicker, and it's just going to go so much faster. Before we
start making our cuts we're going to adjust the blade so that the length is about the same as the
width of this board. This way we don't cut into the board beneath it that much. Now let's start
making some cuts. That side's done. Now I'm just going to flip it and do the same thing on the other side.
Both sides are all finished. Now for the center. I want to keep these boards whole, so what I'm
going to do is just take a sawzall and then start cutting out the nails from the back side
instead of trying to pry these out because I don't want to split the wood.
There we go. Got the nails cut out. Didn't split the wood. I'm going to do the same thing for the
rest of the pallet. There we go. All these boards are cut. Now what I'm going to do is just flip
the pallet over and do the same exact thing that I just did on this other side here. There we go.
Completely disassembled. That was actually really easy. Next we want to make sure we have a square
cut and as you can see my cut wasn't perfect. I'm not great at the skill saw. So in order to make
this edge square what we can do is either set up a square like this and then just bump it up against
here and use the skill saw or we can just take a drop saw which I'm going to do. Just bump it
against the edge and then make a cut. We're going to cut off as little as possible just so we don't
waste some of the length of the wood. Now we have a nice square edge. We're going to do the same
thing for the rest of the boards just cutting one side. Got one side all cut. Now what I'm going to
do is search through the boards, find my shortest board and then I'm going to measure that and then
cut all of them to the same exact length. I got my boards all lined up to find the shortest one.
We got Tuck over here. This guy's a beast. He's always out here. If you love seeing this guy in
the videos spam some hearts down low for the boss, the king, the guardian of the garden, Young Tuck.
He's a pretty good guy. We also wanted to mention to check out some of the merch at
jamespergione.com. We've got the new gardening is life merch with the garden with the flower of life
on it. We think it's pretty cool and we're really happy with the way they came out but let's get
back to the actual build. So we lined up all of our boards here on this one side. Now I can go
through and find my shortest board. This is my shortest board right here. So I'm going to measure
everything off that. When I get the measurement it's 43 and about a 16th so I'm going to cut
every board to 43 inches. I also noticed I have a few boards that are my worst boards in here
like this one right here it's cracked and also this one isn't great either. So I'm going to
save these on the side and use those as braces and the rest of these boards are pretty good to go.
I got my board measured. I measured from the edge that we squared up. Now it's at 43 inches right
here. I made my line with the actual square and now we're just going to cut them all on the drop
saw. Got this one all cut. Now what I'm going to do is just take this board and I'm going to use
this one as a template for all the other ones. This way they're all exactly the same length. I
don't have to measure anymore. After marking all these I realized to make up the frame of my actual
bed I'm only going to need nine pieces. So I'm going to do three in the front three in the back
and then the other three will be cut in half to make up the the two ends. So I just need to pick
out essentially my best nine pieces. The other pieces I'll use for braces and you'll see as we
progress a little further along. So I really only need nine pieces. I've already got two cut. I only
need to pick out seven more. I selected my best nine pieces. I've got them right here. I also have
them all marked using the same piece of wood the template. Now what we're going to do is just cut
them all so they're the exact same length. Everything is cut to exactly the same length.
Now I have it lined up on how we're going to build the bed. So this right here is going to be one of
the sides. These three pieces. This is going to be one of the sides. These three pieces. And then this
is going to be the two ends. I'm just going to cut this exactly in half. We want to make sure that
the pieces we're cutting in half that we don't have a knot right in the center where we're going
to be cutting in half. That'll like allow it to split or make the board a lot weaker. So we're
going to use these ones as the pieces that we cut in half. What I'm going to do is get this full length.
We know it's 43 inches exactly. So we're going to measure half of that. 21 and a half. Then we're
just going to make our cut right at 21 and a half. We want to make sure we're missing these nails
though. So if I have to use a different board to make sure I miss the nails then I will. But we
want to make sure we're missing those nails. All of our pieces are cut and we can begin assembly.
So first I'm just going to lay these end pieces down and one of the side pieces. Then what I'm
going to do is just take these, lay them out just like this. I'm going to make sure the ends are all
lined up. Then I'm going to take my clamp, clamp it down. See if I'm pretty close. Those look good
like that. We're going to clamp it together just like that. Then do the same thing on the other side.
Should be lined up pretty nicely. Looks good. Just like that. Now what we're going to do is we're
going to measure the height of this right here. So it looks like 10 and a quarter inches. Then we're
going to take one of our braces, we're going to cut it down and then we're going to have this brace be in
the center just like this. This is going to hold this side all together. Mark that with a square
like that and then these are going to be 10 and a quarter inches and this whole board is over 43
inches. We know that. So we're going to be able to get four braces out of each board here.
Take this and this is what's going to go right in the center just like that. I got this piece of
wood centered here. I'm just going to make sure it lines up at the top down there at the bottom.
Now I'm going to take my pre-drill. I'm going to pre-drill a hole.
One here, one here just to make sure I don't get any splitting. Then I'm going to take
inch and a quarter screws. I'm going to attach it just like this and I'm using inch and a quarter
because you see they're not going to go through just like that. I'm attaching with two screws
just like this. This way that the board doesn't shift on me when I pick it up. Do the same thing
here. There we go. That's all in. Now we can take these clamps off. That right there is going
to be one of our sides. Looks pretty nice. We're going to do the same thing for the other side
and then I'll come back to you with the ends. Second side is all finished. Now let's move to
the ends. So this is what we're going to do for the ends. Got the end pieces here all cut the
same length. I'm going to lay them out just like this. Take my clamp. This one I'm going to clamp
in the center. Make sure we're lined up pretty good. Looks good. Then we're going to take our
leftover scrap. These pieces that we're going to be using for braces and we're going to put them
on the end just like this. So first thing I had to do was just cut it to length. Should be my exact
same as the other one about 10 and a quarter. So we'll measure this 10 and a quarter then get a
cut. Got that cut. We cut off the nail side. Both these sides are cut and we're just going to line
it up just like this. We're going to make sure it's flush at the top and on the sides just like
that. Then we're going to pre-drill. Take our screws and connect it all together. There we go.
All attached. This is going to be our one end. We're going to do the same thing for the other end
then we can attach the whole thing together. Both ends are finished. Let me bring you over to a
section over here and show you how it's all going to come together. So what we're going to do is
we're going to build it on this flat piece of wood right here. I'm going to take this end. It's
going to go just like this and you can see there's a little bit of a gap. The height difference.
That's okay because this is going to be the bottom. The top is going to be down here because this is
going to make it sure it's nice and flat. This flat board we're working on. Then we're going to
attach this to connect everything together just like that. But to make it easier what I'm going
to do first is take this board and attach it to this just like this. Let's get this all attached
here. I'm just going to line it up just on the edge. Put another screw down here. Let's do the
same thing on this side now. Line it up at the top and then we'll screw it in. There we go.
This end is done. Looks nice. We're going to do the same thing with the other end and then we
can finally just do the last attachments and be finished with the bed. Let's start getting it all
attached now. So this right here. This is going to be the top but I'm going to place it on the bottom
so it's a flat on this piece of wood. Then I'm going to take this side piece here and I'm going
to put it right against the edge just like this. You'll notice it's a little bit tall. It's a little
bit longer on this side but that's okay. This is going to be the bottom. The top is going to be
all flush because we're pushing against this piece of wood here. Now all I have to do is take my
screws and just attach it all together. You can see how that helped pull it out a little bit to
make it nice and flush on the end. Now we're going to do this bottom one. One corner done. We're going
to do the same thing for the other three corners. There we go. There's the final screw. Let's flip
it over the way it's going to go. Take a look at it. There it is. I think it came out pretty nice
just to start with one simple pallet and build a raised bed for free. Can't beat that. Now we just
got to fill it with soil and get some stuff planted. I'm going to take another look at it. I'm really
happy with the way it came out. I just got to level it, fill it with some soil, get some plants in it
but I think it just I think it looks beautiful. To be able to build a bed like this for absolutely
zero dollars just for it to be free and I think it's someone something that everyone can basically
do. So let's actually get some soil in here, get some plants in and then see what it looks like
when it's actually filled. Looks good. Now level it all out. Then we got to grab some plants to
get in here. Looks good and after using that whole pallet these are only the really pieces that I was
left with. So we did a good job of using all the wood besides just the pieces in the center that
hold the whole thing together. So let's get some flowers, some herbs, some lettuces and stuff and
get them planted. Most of the bed is finished being planted. I'm just going to stick one more
lettuce in right here. Just pop it out and then pop it right in just like that. All I have to do is
just water it. I'm happy with the way it came out. Tuck wants to get on here and grab some stuff.
He sees all the good food. He's hoping we get some carrots in here so we need to make sure that
we do that. But I'm surprised how much food I can actually plant in here and even flowers, all
different kind of plants. I think it just looks fantastic and it'd be fun to stick in the garden
or even just have on a porch or something. So it's super versatile. You can plant a bunch of
different things. It's got a decent height to it. If you want you could put some landscape fabric on
the inside or if you want you could even use an oil on the outside to preserve the wood. But I
wanted to build this whole thing for free. That was one of the ideas to just take a simple pallet
and turn it into a raised bed and not spend any extra money. This way you can save some extra cash
if you want to buy some plants, some flowers, or even some soil. Look at this guy. He's looking for
a good snack. He's looking where all the carrots at. That's what he's asking. So spam some hearts
down low for the big boss because he's always out here always having a good time with us.
But that's today's video growers. Thanks for watching. Uh thanks for coming out with us.
Thanks for just spending the time building this bed. We had a lot of fun doing it. We hope you
guys take the opportunity to grab some pallets, build a bed, and get some more food planted.
I mean the only way you're going to be able to eat organic food is if you grow it yourself.
So nothing better than just coming out grabbing some fresh stuff. This guy is ready to get some
snacks. He wants some fresh carrots in the garden. He's getting antsy. We hope you guys enjoyed it.
We also want to mention to check out some of the merch down at jamespergione.com. Grab one of the
gardeners life shirts with the flower of life on it. And before we let you go we need to mention
a thank you to one of our new chow members Stephen Caldwell. Thanks for being a part of
Thanks for having your hand in everything we're doing back here. So we hope you guys
enjoyed the video. Got some value out of it. James and Tuck we back to you again real soon. We out.
