Join me in this video as I share my first experience with my newly purchased laser cutter. While it may seem unusual to create small structures before the scenery can support them, I realized that constructing the large buildings for my layout would require a tool like a laser cutter. I wanted to ensure that I could achieve consistent and repeatable results, especially for building structures as wide as a train station or as tall as an apartment complex. I owe my inspiration to @StevesTrains, whose video reviewing the Aufero laser cutter a few weeks ago encouraged me to take the leap.
Welcome back to The Union Project. In this episode we'll discuss why purchasing a laser
cutter is a totally justifiable decision despite the fact I've barely completed the track work
and I have a hundred other projects I should be working on. Let's get started.
As I enter the eighth month of this project things are progressing well. Last time I talked about
using foam core building mock-ups to help get a sense of structure size and scale.
Seeing how big these buildings are has become intimidating. I've scratch built structures using
styrene and 3d printed detail parts in the past but creating things at this scale feels near
impossible. So I recently came across a video by Steve's Trains where he detailed his first laser
cutter purchase. After watching the video I was hopeful that this might solve my problem.
So without any consideration or research I just simply went ahead and purchased a similar laser
cutter. And hey because there was also a coupon code. Steve has already thoroughly covered a lot
of the details for the laser so I'm not going to go into anything about that. Instead I just want
to share my experience using the laser cutter as a novice and what I learned from my initial
attempts. Styrene has a low melting point so I had to experiment with the laser's temperature and
speed to find the optimal combination for clean cuts as the cutter would melt, scorch or warp the
plastic. I didn't have a lot of luck. Despite spending too much time on trying to find the
perfect setting I simply couldn't achieve the result I was looking for and I started to regret
my hasty purchase. I changed my approach and decided to use the laser as a scoring tool rather
than a cutting tool. Working with styrene you typically score and snap the plastic so I figured
that if I took the same approach here I might have a greater success. The laser was able to create
clean unscorched score lines on the styrene which then easily broke along those lines.
This also meant that etching small details such as brickwork was straightforward.
I set out to build a small structure to test the combination of the laser cutter and my 3D printer.
I settled on a small concrete block structure located in the North Bathurst Yard at Union
Station. With minimal details, windows or doors, it was a good candidate for the test.
I drafted the structure with Adobe Illustrator. It's a program I'm comfortable with and it's
compatible with the laser cutting software. I arranged the panels to minimize the scoring lines
and added a layer for concrete block etchings. With the completed design I loaded into the laser
cutting software and adjusted the settings for cut lines and etching lines. The cut lines,
or scoring and snapping lines, required multiple low power passes of the laser while the brickwork
or etching lines required a single pass. During the cutting process I learned that the laser
follows the profile of every shape in the design. This means that multiple shapes stacked one on top
of another will result in multiple cuts for each of those shapes which cause some areas of the
plastic to be scorched and others clean. Once the pieces were cut they broke apart easily and
removing the fragments from the windows was simple. While the styrene required some touch-ups
and the heat did create some warping, preparing the walls was still much faster and easier than
doing it by hand. I designed and 3D printed windows and doors in a similar process that
I've done for past projects. The assembly of the building was a breeze. I used super glue to attach
the pieces together and I also added some extra supports to the interior of the building to hold
up the roof. To prime the building I used some flat brown spray paint I had on hand.
For the paint job I used some cheap acrylics from the dollar store.
I attempted to add a light wash for the mortar lines to help bring out some of those laser cut
details. I also used some paint markers to create graffiti around the building. This is going to be
a detail I want to add to most of the layout so this was a great test bed.
When it was all said and done I think the results are really effective
and I believe that the cost of the laser cutter is now well worth it.
Overall I'm really happy with how the building turned out. That said if you're thinking about
getting a laser cutter keep in mind that it takes a lot of effort to prepare the artwork for the
cutter. I have experience using drafting programs and programs like adobe illustrator so it's not a
real problem for me but if you're new to this be prepared to spend a lot of time drafting
relatively simple objects. This 20 by 30 foot building was my proof of concept. I wanted to
make sure that I could create something like this at this scale before moving on to more complex
urban designs. I'm confident in my ability to use the laser cutter so now I can return my focus to
the hundred other projects I should have been working on. Thanks for tuning in and I'll see you
next time.