Wie man ein Schaukelpferd baut | Handwerkskunst

SWR Handwerkskunst
8 followers
7 Video Views·Feb 7, 2023
This is where a classic is born.
It's not a children's game until this toy is finished.
It takes skill and dedication.
And it is loved by everyone, over generations.
On the Swabian Alps, where the role models have enough space to go wild,
this is exactly the right place to make a swing horse out of local wood.
Up here, at an altitude of 700 meters, in Engstingen,
a small village about 20 kilometers south of Reutlingen,
Peter Heist is a carpenter.
In his woodshed, he looks for the right raw material for the swing horse.
He has a large selection, such as birch, oak, ash, pears.
Peter Heist has been a carpenter for 40 years.
He especially likes to make things for children.
In the past, only toys, today whole game landscapes.
When it comes to wood for a swing horse, it's not just about
what color it has and how hard it is.
It is so that we want to find something suitable for the children.
And for a child, a small child, alive, fresh,
still given all the nice things, what can you take?
So we chose the birch, because it actually has a very nice,
pleasant, retaining color.
This very dark, almost dusty,
you can still see all these ridges.
But then, when it blooms in spring,
it has this very big light and fine.
And in the wood it has such a compromise,
it has both a fine, tender, almost soft surface
and this retaining kind between flared formation
and these strips that are usually always visible on the outside of the wood.
And we just said, a cherry tree,
if the children can climb up and get the cherries,
that's just what can go well with a child.
That actually looks pretty good.
So that also has the right strength, has 80 millimeters,
that would be quite okay.
So we can still take this.
For the curves we have now come up with
that you don't take the cherry, that it's all in one,
but that we then take a darker wood again,
that then also emphasizes the heaviness a bit.
And there is the pear.
And it probably even has boards that you can use right away.
So this is not a telling board.
But that always disappoints.
So when it is hoisted afterwards and probably even oiled,
you will see at the end that a very nice fiery color comes out of it.
Then we take this and that too.
I didn't have a rocking horse myself,
but of course we somehow had people in the family
who had rocking horses.
I thought it was very nice to rock as a child.
When a child grows up,
it is usually the case that you say,
there is actually nothing more with rocking.
But we want to build such a big horse now,
that even the older children,
so shortly before school age or maybe even shortly after school,
or in a freshly trained way,
can actually still rock.
We get the templates,
see how we get it divided,
and see what I can already see.
We have branches here.
We have to see what might happen on the other side.
We just take them in transfer,
say here like this and like this.
Branches don't just look stupid,
they can also fall through and leave ugly holes.
The templates he uses to build the horse
now have to fit exactly around the branches on the boards.
His employee Simon helps him with the four-eye principle.
And the closer the templates fit on the board,
the less material they need.
It will probably work.
Then we turn it around like this.
Then we take the chainsaw
and see if we can get this piece through here.
A pipe system is installed in the entire workshop,
which sucks the dust off the large machines,
e.g. on the scaffolding.
We now make sure that we get these pieces of wood aligned.
Here, for example, it is clearly visible
how the wood has curled up.
We want to take that out now,
so that the surfaces to be glued
fit well together and the glue lasts.
To put it simply,
a straight board is created here from a chrome board.
Now we can see
that if the woods were not aligned,
like this side, for example,
they would have to be glued together at some point.
Here it would have turned out quite well,
because both boards now have this curvature.
But you can still see a small layer of air in between.
And if we then say
we want two planes, aligned surfaces,
then we take that,
clean it up quickly,
put it on top of each other,
then you can already hear
how it fits and how it sits very tightly on top of each other.
Good.
We have now aligned,
we have a surface,
and we now have the option
of making the boards really parallel,
thick and shape-sustaining
on the so-called thick planer .
And that's what we're doing now.
So we turn on the machine,
it gets a little loud
when it turns on the suction area.
Many of the machines that are in the workshop,
like this thick planer,
are over 50 years old
and work like on the first day.
They don't operate with a touchpad,
but with the crank.
Somehow it fits the swing horse.
That's not high-tech either.
The old Greeks already had wooden horses on wheels.
The first swing horses were certainly already available in the 17th century.
And since then they have been in the children's rooms all over the world.
Somehow swinging doesn't come out of fashion.
I also believe that probably already in some early cultures,
when people sat together and had conversations,
songs also took place.
And then they sat down and performed their songs in this way.
And everyone actually knows that when such a movement takes place,
when you have a small child and swing it,
it is always calming and has something,
of course, sleeping in, but also something somehow balancing.
And I think that for us,
now with the horse,
can also be achieved a little bit.
But now the templates also have to fit on the pieces of wood.
It is important, of course,
that you pay attention to these bevels from the edge of the forest,
that a piece is not missing afterwards,
that the connections are good, that there are no cracks in them.
Yes, but so far, it's a bit tight,
but I think it works.
And then we just draw it.
Peter Heist did his apprenticeship in a large company,
but that was nothing for him in the long run.
Then, of course, it was already common at the time
that we mostly worked on spade plates.
And there was a big saw, such a format saw.
The machine ran all day and everything was cut.
And of course these materials are somehow made like dead.
And in contrast to that,
if you now have such a beautiful piece of wood
and can work with it,
experience the smell,
see how the wood actually always comes to life
with an even nicer grain,
that's a different joy and a different feeling,
that's clear.
And then the same thing here.
Here we have a branch, this one.
You have to be careful.
So it's very close that we might get around this branch.
Yes, I think it should fit like this.
He roughly cuts the thick pieces of wood at the band saw.
Freehand, that's where the master is.
And now for the first time it becomes visible
whether the wood also fits a horse.
So I would think
that this is actually quite well done.
You have such a nice grain around this ear.
The color is actually quite nice.
And I suspect
that when we have sanded and oiled it afterwards,
that it will come out well.
We now simply grind the edges around the outside
with the so-called edge grinding machine.
Then we have less work afterwards,
because the saw cut is relatively rough.
So we want to make the cakes now,
get this shape.
Sometimes you do it like this,
so that you only take this narrow story down here.
We have now decided
to make it really high and strong.
So on the one hand,
because it just fits very nicely in terms of shape.
And on the other hand,
because we can then attach
such small connecting pieces in the middle afterwards,
so that the children can climb on it.
The horse is relatively tall, big horse.
And that's an advantage.
Now let's see how it fits in there.
So what we see, that's very important.
It still has a woodworm,
which of course has to get out everywhere.
You can see it there.
It is now only sitting under the bark in the cambium.
This is this growth layer.
And it doesn't really bother that much
when we have it away.
It's not in the actual wood.
And that's nothing that would be completely abnormal now.
Well, let's see how it fits on it.
Peter transfers the shape with a template again.
This time on the selected pine wood board.
Because the barks are supposed to lift off
from the cherry wood of the horse with their dark color later.
You can see up there, that's such a laser.
I can now align it pretty, pretty precisely.
I can saw along there,
I can then sand over it again afterwards,
so that it really fits exactly in the line.
Well, it's getting a little loud now.
Again.
Where it fits or has to fit much more,
he also likes to use modern technology.
The board is very long,
and crooked grooves would be dangerous.
If the horse shakes later,
the child should be able to hold on.
To do this, the horse's head needs a handle,
and this, on the other hand, first of all a hole.
Peter does not drill through in one move,
but gently up and down again and again,
so that the chips come out
and it does not start to boil in the borehole
due to the fast friction.
So the so-called pot drill,
it's just a grateful drill,
in that, when I drive out of the borehole again,
that it doesn't take any splinters off me up here.
The other drills that you have sometimes,
so a kind of snake drill,
a normal drill with a centrifugal tip,
it tends to take this wooden surface with it,
and then we have some cracks there.
Of course we don't want that.
Now it's getting exciting.
So we're going to play a little puzzle game
and see if we can put all the parts together.
And above all, we have to see
how the parts come together.
We have now drawn the individual parts a little bit.
We have to know what is inside and outside.
And then we know that the belly is at the bottom
and the seat is at the top.
And there are already small cracks here.
This is actually the positioning for us.
Then the same here.
The front leg.
And we need the parts
on which the lovely children can sit afterwards.
Let's see if that's enough
or if it needs to be a little more.
It comes like this.
And then we have the difficulty
in connection with the glue.
We apply the glue in full surface
and then have a phenomenon similar to,
let's say, the car at Aquaplaning.
The surfaces come together
and then we have the glue in between
and it can move away.
And we thought we'd do it like this.
We take it in height,
make a screw so far in
that only the tip looks out
and then we can push the tip into the wood.
And then at least this connection
can no longer run apart.
So we have the problem,
we have one surface here,
the second surface,
to have to glue everything all at once.
And then we have to see
how we can do that.
Now I would say
we quickly mark
where we can drill.
I would say
actually there on the belly part
and actually there again.
Now we have the big clamp,
it's already there.
Yes, then we need glue.
There is glue from the bottle
and there is glue with such a small pot.
You can put a brush in there,
put a hat on it,
it doesn't dry out.
And we do it like this.
We apply the glue with the brush
so that it goes relatively completely
over the entire surface.
You can of course go here
and, for example,
if you are now gluing such a surface,
apply it with such an S-line,
glue it on,
and then always only
where this S-curve is,
this glue connection.
And in this case
we need a fairly stable
and firm and durable
and durable gluing.
And then we apply it fully.
And if afterwards
the glue is pressed
into the pores
by the forces,
by this force that comes on it,
then it turns out
that there is a network
like a lot of little suction cups
going into these pores.
And afterwards,
if you ever
wanted to tear it apart again,
then only the wood
tears up next to it
and the actual
glue surface,
it will stay firm.
And let's try that now.
Wonderful.
Once.
And the other side
we could also
maybe indicate there.
How far
can you see there?
So it's already
exciting because the glue
may take about
eight minutes, seven, eight minutes
until it gets hot.
No, nonsense, hot, dry.
Not liquid enough
to be able
to glue really well.
So.
There we see
that it all wanders off a bit.
We have to make an effort now.
And then it has to be
aligned again.
So you can see here
how it runs away.
I can now
move it completely freely.
Everything is still in there.
The urge to move
somehow fits the swing horse.
Young people like girls
can really get on with him.
Playfully learn
motor skills and balance.
And that without
parental compulsion.
I have to make sure
that it works
reasonably well.
So.
Belly down.
There we have
the good horse.
You can see there is already
a layer on it.
Then the wood can of course run away.
And then we have to see
that we get it positioned correctly.
Okay.
So that's okay so far.
I don't think you have to correct anything anymore.
At the end of the glue work
they practice
pressure at the right place.
Best everywhere.
I think the glue surfaces
last quite a long time.
I think generations
can go over it.
A screw connection
would certainly be sustainable,
but of course
it is not a craft
highlight.
The whole thing
just has to dry now.
Not even that long.
Depending on the glue,
one to two hours are enough.
Let's see
what came out of it.
You can take it up like this.
You can see it so nicely.
So we said
that we made
this section here
with diligence.
So that we can shape
this story a little bit.
It's not much.
But we also
look that we can
iron it a little bit
everywhere where the big
section is now.
I think
it will look good.
I hope.
The angle grinder
makes a soft swing
It is also
relatively important
when you look at
a thing
and can
follow a line
with your own eye
and get something
for yourself.
Then it is very different
than when you have a very clear line
in front of you and see
and it is exactly shaped
or maybe a straight somewhere.
I think that this
actually makes life.
And that the work
that we now
with these grinding processes,
that the child can
get something out of it.
So out of the
ironing a little bit,
good two hours of concentrated work
with different
discs and grinding forces.
The curved
lines promote
your own imagination
and are the opposite
of ready-animated pixel thunders
of video games.
We can now also see here,
I wanted to show it quickly,
quite nicely
how this fluttering,
which is actually indicated
very gently here,
comes out even stronger
when we go around the curve.
Here, too, you can see very nicely,
although the wood
actually shows itself very straight
from the picture here,
that you can see
these flutters all around.
Let's see
whether it is conceivable
that we can get it out
with the iron.
We have the brainwood,
the wood fiber runs up there
and that's a bit difficult,
but I think we'll try it.
I think you have to have it in your blood.
That's just the A and O.
You have to know
how the tree has grown,
how the fibers behave
and how things
can be put together,
how processing
can take place
when a notch is made.
That's actually the most important thing
you need to know.
The different directions
in which the wood fibers have grown
can challenge the carpenter
or serve him
as a means of style.
The combination
of the varied grain
is not a happy coincidence
with this swing horse.
Peter Heist is simply experienced enough
to know from the beginning
how the horse becomes alive.
It's like this.
The horse stands
on the ground with his legs.
The force is directed down.
Here we have the two legs
and here
the horse
wants to run.
We have this direction
where it's running
or how it's running.
That's very nice.
You always have
on this section.
I think
a small differentiation
always brings
something alive.
The horse
should get a nice mane now.
We have chosen
a hemp cord.
We have
a long hole drilling machine
and can easily
get these holes
in there.
Let's see
if we can do it now.
I'll turn on the machine.
This time
it's just a little loud
and I'm sure it doesn't hurt at all.
One last
extra fine fine grinding
and then it's time
for the first oiling.
We have a hard wax oil here.
I apply it with a brush.
You can also apply it
with a rag.
Actually, you have to say
a little break, a moment of remembrance.
We now have
the raw wood here
and we put the oil on it.
There will be quite a change.
I'll tell you.
Let's see what comes out of it.
So
the wood
is fired,
as they say at the shrines.
And we'll see
how the whole thing
changes quite a bit.
So
when I apply it with a brush,
a lot of oil comes on it.
Actually
a little too much,
but you can let it work
and then
just take it off
with the rag.
All the excess
that's on it.
I would say
that's the most beautiful work
on the whole horse.
Because
the end result
comes to light,
the beautiful
color of the wood
shows itself,
the work is
about to be finished
and
the time is not long
before the children
are allowed to burn.
The oil is naturally
non-toxic and the children
could even nibble on the horse.
The whole thing doesn't last forever,
but it lasts quite a long time.
So depending on the use,
you can re-oil it.
You can even use normal olive oil.
But I think
five to ten years
is enough.
And we can actually
see how the surface
becomes a little soft
and
how the whole thing
gets a very even
surface.
And now they're taking
the peaches made of pear wood again.
This works better
together again,
because the dimensions and angles
now have to be exactly right.
After all, it's always about
the safety of the children.
And that's why
it can also be screws.
Screws, saws,
grinding, gluing.
Such a swing horse is really a lot of work
for the professional.
And what if an ambitious layman
now thinks, I can do that too,
build a swing horse?
Then I would say immediately
and spontaneously,
wonderful, this idea,
you should follow it.
You can do it with a jigsaw
and maybe even
if it doesn't work at all,
if you don't have any clamps
to clamp together
or somehow
also do something with screws.
It is always more important
to design something
for such a child yourself,
to make the child,
if possible,
or if it is allowed,
to experience it too.
And then a connection
is created.
On the one hand
from yourself
and on the other hand
of course also from the child.
The hairstyle is still missing.
Glue holds the pieces
from hemp rope
in the pre-drilled holes.
At first glance,
it looks more like
a Jamaican racing horse.
But as soon as
they turn the ropes
a little patiently apart,
the rasta hairstyle
still turns into a loose mane.
Children need the handle
to hold on
when the horse is swinging.
We want to let it swing,
otherwise it would be a standing horse.
And we have prepared
the horseshoes.
And I can maybe add
that you had to pay attention
when assembling the horseshoes
that they really stood
in a clean direction
and that they did not
somehow appear to be
distorted.
Otherwise the horse
would swing in this way
and might even
tip over.
And we make sure
that we get it into the groove
and then we get the good
swinging movement
that we want.
So if the curves
are, let's say,
5 cm too short,
then it can happen
that the children either
fall over in front
or tip over the horse
backwards.
And of course that would be fatal.
So we have arranged it
so that the curves are so long
that when the horse really
goes to its outermost position,
it will slip away
and not overlap.
That's actually the difference
and that has to be taken into account.
There are a good 40 working hours
in this unit.
Maybe it would have
gone a few minutes faster
with a little less fine-tuning
or faster oiling.
But Peter Heist
is not the type for
roughly and
you don't see that later.
So maybe I do have
a tendency to be
a perfectionist.
From time to time it also happens
that I am too long
and too lovingly
concerned with things.
With a swing horse
there is actually
never the question
because
the intention,
the work,
the specialness
that flows
into a swing horse
is never for nothing.
So
there
I am also happy
to sacrifice a little more time
and to rejoice
in my perfectionism,
so to speak,
and can then do it
as I imagine it
and can then be sure
that the children
can also have something of it.
Two children from the neighborhood,
Maria and Ruben,
have been waiting for this moment for days.
Finally,
a test swing.
And with this
unique horse,
the weight of the rider
hardly plays a role.
Guaranteed stable
for future generations.
The nice thing is
when you make something
yourself
and put your intention
into it,
then you get
on the one hand
life
and on the other hand
something like a kind of soul.
And that's what
the child can actually take again.
I think
the child can definitely feel
whether
some part was made
only with the machine
and there it is,
or whether
someone really
made an effort,
used all his
forces,
his possibilities
and the thing can
later stand
as really individual,
own.
Learn more at www.circlelineartschool.com
