Wie man einen schönen, schiefen Korb flechtet | SWR Handwerkskunst

SWR Handwerkskunst
8 followers
14 Video Views·Mar 6, 2023
A knife, a hammer, a lathe.
A manageable tool.
Of course, there are still the good things, but how are they made?
Craftsmanship.
We'll show you, and we'll take our time.
And this is what it's supposed to look like.
Wrong way round.
Clip your teeth.
These will be used to make a basket, a sheaf basket.
An ergonomically shaped shopping basket that fits almost any hip.
The hip smuggler is her invention.
Monika Nickelstein, independent basket weaving master and weaving workshop designer in Kindenheim in the Palatinate.
We'll show you how she makes her basket, from the very beginning.
And we'll show you how much feeling it takes to grow it.
It feels...
They're nice and smooth, and a bit waxy on the surface.
And that's a nice feeling.
I think it's gentle.
It sounds a bit paradoxical.
Fresh weevils are first dried for months before weaving, and then watered again.
Monika Nickel's workshop in the old fire station has the best conditions for this.
There's an old wine cellar, and it gave her the nickname.
How long a variety of weevils stays here in the meadows, how long it takes to soak, when the water is exchanged...
It's all experience, a taste for the material.
Monika Nickel's hip smuggler for the shopping tour.
Everyone is unique, with their own swing.
And in their own way, perfect.
That's what makes them special, the art of basket weaving.
One attracts more, the other less.
You can see who's got what.
If there's a basket running around, I'm pretty sure I can tell who's got what, if it's someone from Germany.
Craftsmanship.
These peeled weevils were in the water for two and a half hours, so they don't break when weaving.
In the beginning, Monika Nickel cuts weevils into short pieces, for the bottom of the shopping basket.
I'm splitting the cross-layers in the middle with a knife,
and pushing them over the long weevil.
Always alternating, so that the thick end is facing left and right.
To balance out the difference in thickness.
So that the bottom is more even.
This is called a cross-layer.
She likes to use it for surfaces that need to withstand something.
There are no weevils yet.
Nothing that shows that the basket she's making is going to be crooked in the end.
Now I'm going to put a weevil in here.
And pull it carefully around these bottom pieces.
I'll do the same on the other side.
Now I'm going to put these weevils in here.
What's that called?
It's called weaving.
We call this long weaving, the flat part where the weevils are formed, we call it weaving.
This creates a straight surface.
Then the weaving stays in the angle in which I put it in, and doesn't turn all the time.
Weavers work free-floating.
In the truest sense of the word, out of the hand.
Only with orders with centimeter-precise size specifications,
Monika Nickel works with a measuring tape.
Almost automatically, the handle in the bucket.
It feels immediately when the weavers get a little too dry.
Pull it out nicely so that it gets really tight.
And this is exactly where the weaving comes into the basket floor.
When weaving, I always push these cross-beams down a bit.
I have to make sure that they are in a level.
Exactly.
That's the other side.
That it's curved down.
It looks like she could bend the two threads.
Yes, but it only looks like that.
You need a lot of strength in your fingers.
These are still okay.
They are relatively thin.
I'll knock it again to compact it.
And suddenly it's recognizable.
The bottom of the basket.
You can see it's slightly curved.
That's the inside of the basket.
That's down there.
That's why I also put the weavers so that these sections come down.
And so something simply grew out of nothing.
That's the fascinating thing about weaving.
That you can make three-dimensional, stable things from individual sticks.
With hardly any tools.
Monika Nickel lives and works in the vineyard Kindenheim in the Vorderpfalz,
above the Rhine plain.
She only grew up a few villages further.
She came to Kindenheim because her brother bought the old fire department there.
That fit exactly.
The basket maker and weaving designer,
that's what her apprenticeship is called now,
found an ideal workshop in the former vehicle hall of the fire department.
And enough space for her big and small work.
Neighborhood is important to her.
Hello, Moni.
Hello, Annett.
How are you?
Good.
I just finished it this morning.
It's already dry.
She repairs a basket against naturalism.
Monika Nickel was born in 1974 in Borneo.
Until she was one and a half years old,
she lived with her parents and siblings in Indonesia.
Her father, an agricultural engineer,
had set up a agricultural school there.
A few years ago, she did another internship in her old home.
As a basket weaver.
She liked to be there, but she loves the Pfalz.
Her way through the vineyards.
And she can be inspired here, too.
Something with snails is floating in front of her at the moment.
It's just inexhaustible, her craft.
And her ideas are, too.
The hands are really the most important thing.
There are many things that you have in your hands.
You can't explain them exactly.
The interesting thing is that many people think
baskets are made by a machine when they are cheap.
There is no machine in the world that can weave.
Because so many small millimetres of work are felt.
What does the material do now?
Is it still bending?
Do I have to pull it more, push it more?
No machine can do that yet.
I don't know if it's ever possible
that robots can be programmed so well.
I hope almost not.
Since the basket is supposed to be asymmetrical,
that is, nice and crooked,
I'm going to think about how I'm going to line it up.
I'm going to make a gorge in there.
And that's why I'm going to weave a little bit here and there
on the edge, which is not usual for the oval floor,
to get a real belly in there.
So now look very closely.
Now the foundation is laid for the beautiful crooked.
That's a bit of experience,
that it will also be beautiful crooked afterwards.
And the gorges, do they also count as experience?
Yes, they do.
I remember at the beginning of my training,
I got a ring from my friends.
I couldn't put it on after the first few weeks
because the muscles in my hands got so strong.
Even the wrists seem to grow with the work.
It was also funny when I was informed about the profession
and in the documents it said,
as a side effect, cramps in the hands.
So, a little more on it.
And what happens when a gorge is crooked?
So when it's really crooked,
then it's like a cracking point,
where the gorge usually breaks when braiding
or where later you get stuck and the whole thing tears up.
If it only has a slight crack,
then you can sometimes pull it so that this crack then goes out.
It just doesn't look nice either.
So you just see if someone
A. sorts out the material well
and B. also has the feeling for it.
So this variety here is also a very tough gorge.
This is an American gorge.
It is very stable, you can braid a lot with it.
Young vines.
Cork vines are called that because in the past
they were preferred to use baskets.
They still stand on the old Rhine near Bobenheim-Roxheim today.
Always at the beginning of a year,
the one-year-old vines were harvested for braiding.
The trees love close to water, moist locations.
More than 300 species count, botanists.
Vines cross each other easily and wildly
and are therefore difficult to determine.
There was a basket-making school here as early as 1880.
150,000 vines were planted at that time.
These natural monuments still date from that time.
The school closed.
The vines stayed.
In their own way, they are witnesses of time, these old guys.
These vines are only cut every four years.
By nature protectors.
Today, vines for basket makers and braiding workers
come from plantations, cultivation farms.
Machinely cut from extremely low-grown trees.
These old gentlemen here are not suitable for braiding.
Ennobled grape vines are surprisingly too hard,
too little bendable for braiding.
The vines that Monika Nickel buys are 120 to 140 cm long.
She always avoids a few strong more,
because a little bit of swag is always.
I see there are several damage points here,
these bright, scar-like rings.
That's where the alfalfa was.
It eats under the bast and the vines break very often.
I'll take a new one right now.
And here, where this vine has a dent.
And it goes up like a ring.
And that was the alfalfa.
And it also disturbs the vines in growth.
And they also break often.
Now I braid again.
I put two vines on it.
And I pull them over each other.
And why is that?
That holds the whole braiding again.
Otherwise my sections would slip out.
And I want to prevent that.
It's like a binding of the whole thing.
It's very stable.
And with this braiding technique,
the advantage is that you can incorporate a light braiding.
With others, it's more difficult.
They are flatter.
And if a basket is to be burdened very heavily,
this braiding is an advantage.
Because then the applied static is distracted by pressure.
How long can you braid with the vines
before they get too dry?
It depends on the room temperature,
on the wind and so on.
I think I can leave them open for an hour.
When I continue to work,
I will cover the others with a damp cloth.
So they don't get too dry.
I also made them wet before.
I always have a bucket where I can moisten.
The peeled ones are much softer.
And the unpeeled ones need three to five weeks
until they are soft.
As long as the vines are under water.
On the ceiling in the old firehouse,
a small impression of the great possibilities of the craft.
Many forms, braiding patterns, techniques,
a basket of peeled and unpeeled vines.
The bark, the bast, is like a protection for the branches.
It retains moisture.
That's why the vines with bark need much longer in the water bath.
Peel both.
Does that work like with asparagus?
These are two-year-old roots.
I wouldn't normally take them,
because they are already so rooted.
But we'll try peeling here.
It's a bit too far.
In terms of growth.
There is an optimal time.
You have to catch it.
The bark goes down great.
Okay, the timing is not right.
But we just saw how it used to be with the old peel clamp.
These are the peeled roots
that you let dry for another year.
Back to our crooked basket.
The bulge on the long sides is already visible.
The ground is ready.
The foundation of the basket, as Monika Nickel calls it.
Now it's time for the body.
The basket weaving master prepares the strong ones for the belly,
the body of the basket.
I cut one half in the arc to the left.
To use it later,
when I put the wheat in here,
that I want to weave a curved basket.
And I have to put wheat in the left and right side
next to each base.
And with that I can use this arc of growth
to shape.
Especially with the American wheat,
it has such a nice arc.
It's great if you can use it right away.
I make space with the milling machine.
It's just a metal tip that I can drill with
to make space to put the wheat in really tight.
So you get strength or have strength.
But sometimes I'm tired after such a work day.
Now I'm changing the direction of the arc
because I want to work more inwards on the narrow sides.
So I turn the tip straight around.
You almost can't see it when you start,
but it makes a difference when weaving.
So I need much less strength.
Now I'm done with starting.
I have an arc here.
Now the board.
An ancient board.
It's very heavy.
But it's sturdy.
The board is her workplace.
It holds a lot and has been smoothed over decades.
Now the underside of the basket is pointing upwards.
You can see that at the cut-off tips.
With full body effort,
Monika Nickel is working on the footrest.
A firm edge that protects the basket from below.
Now I put 4 weeds one after the other,
always on the left of one pole.
So it's about the transverse poles now?
Exactly.
And then I bend them around,
from behind this long pole to the front.
Now I have the 4 weeds,
with which I weave this edge,
in front of 3, behind 1.
The left wedge goes over 3 poles,
behind 1 pole,
to the front of the hole.
Now they are parallel again.
So the left goes again,
in front of 3, behind 1 pole,
and I try to pull it apart a bit,
so that the cut-off...
In front of 3, behind 1.
Sounds easy.
You can slowly see
what the basket will stand on later.
It just broke here.
The strong one, I'll take it out right away.
It remains a force act.
It's just logical,
in terms of construction,
because of this footrest.
If you see that it's broken,
I can only put 9 feet on it.
Now I turn the whole thing around,
and carefully pull all the strong ones up.
Now there is finally a little more basket to see,
or to guess.
Again, the workplace is very important.
When Monika Nickel works on the weaving for the body,
the basket must not slip away,
but must still remain movable.
Again and again she corrects the strong ones,
pushes the material into a crooked shape.
A new bundle of weaving rods is used for the body.
It works on the inside of the basket,
similar to before on the underside.
This will now also be a basket,
but with a different function.
For the hull, the so-called hull basket,
which is always made at the beginning of the whole hull weaving,
i.e. body weaving.
And in doing so, the strong ones are first
quite well covered from the outside.
There is hardly any air afterwards.
So you can weave this basket so tightly,
that if you hold it against the light,
that no more light comes through.
I have to pay close attention at the beginning
that I always smooth out the strong directions,
that I bend them correctly.
Strong direction, what does that mean now?
So that it should not run so crooked,
I exaggerate, as straight as possible,
and from the bow,
that I already mark the shape,
that the whole basket will have afterwards.
The middle finger and thumb are extremely stressed,
because I always have to fix the strong one with the two
and push in or push out.
And with the hull, you usually always make a double hull basket,
so that it has a good foundation, the whole thing.
I studied teaching.
I realized that this is not the right thing
and was looking for a craft profession.
And by chance I came across the Professional Information Center.
I did not have the profession on my radar at all.
I also did not know that it was still an apprenticeship.
That amazed me, that interested me.
And then I did an internship,
three weeks in the workshop.
And that grabbed me so much,
that I decided, I'll learn that.
That tied me so tight,
that I lay in bed at night,
because I still had an eye in front of me,
how I weave.
And since then she has been weaving.
Exactly.
I then went looking.
Actually, I wanted to learn in a company.
I realized at the time,
it is almost impossible to get a job somewhere.
And that's why I went to this state vocational school
for weaving design, as it is now called,
and did an apprenticeship there.
And I do not regret it at all, it was great.
Now I put the layer in.
That means that in every section,
in every strong distance,
I put a wedge in.
I start here,
put it in,
and just weave over one, under one.
It's very similar to weaving.
And this above, below,
we call that a weaving stroke.
First I always do one weaving stroke.
By the way,
the two do not look so different.
That's why you definitely need an experienced eye
when sorting.
It's always funny,
at the beginning of the apprenticeship,
or with an intern,
you can avoid sorting for hours.
You get practice.
And, as I said,
I do it relatively quickly,
because I then sort again
while weaving.
Thicker, thinner, and the corresponding.
This is a place that always looks very confusing for Leine,
because the walls are pushed over each other.
But you must not forget any.
Then I have to push another one in below.
And then inside, in every section,
I have not forgotten any.
Again.
Now I start again at some point.
She does several weaving strokes
one after the other, with several strong ones.
So she gets ahead faster.
Even though the pure basketmaker's teaching
always says one round around.
My teacher always said
it has to be in a cast,
from the bottom up in a cast.
It's not just before one, after one,
quite simple,
but during this weaving stroke,
before one, after one,
I have to hold the support with the left hand,
correct.
The right hand has to feel
how the weft is.
Is it smooth enough?
Is it a little softer?
Do I have to pull it more, push it more,
so that it doesn't bend at the spot?
So it's a lot of fine feeling
that you can't really explain.
You have to do that and feel,
ah, that's how it is.
And every sort feels different.
It depends on when it rained a lot.
Is the weft softer or harder?
That's very different.
So, I'll start at another spot.
That's a little trick when weaving.
You have to start at the same spot
to start this layer construction,
because that's where the weft
usually comes out.
To balance it out a bit,
I always start at another spot.
Yes, it's inflated here.
I'm trying to turn it now,
so that the fibers
can connect with each other.
Yes.
And from now on it goes on,
from the bottom up in one go.
This is the meditative part,
where you work in peace in front of you.
Of course, the weaving itself,
when I'm sitting here
and doing my work,
no one is there,
you're already with yourself
in front of the piece.
But I don't think it's bad.
You can think about so much,
sort yourself out.
In the evening I'm tidied up,
physically flat, but tidied up in my head.
I like to go to my work,
I like to get up,
I like to go to the workshop,
because the craft itself is fun.
I like to have the weft in my fingers.
It's fun to shape it,
to deal with it,
to develop new products,
to play around a bit
and to spin around
and to come up with new ideas and forms.
And the new forms and ideas
we see here in the shop,
in the small sales room,
in her showroom.
She calls her inventions
They are her stumbling block,
but also her bread acquisition.
She lives mainly
from these spinning games,
that's what she calls them.
It looks like
they are quite complicated.
In such a simple,
beautiful, crooked basket
there is much more know-how
and much more skill
than in the complicated
looking spinning things.
I often experience
that when I'm on a market
I'm asked by customers
in amazement,
it's still a job,
and where do you learn it?
And then I always explain,
vocational school,
three years of training,
and then most of them
are totally irritated,
like, three years?
What are you doing there for three years?
And then I almost have to
smile a bit,
because these three years
are never enough
to learn everything
that you could learn
in this area.
Our craft is so diverse,
it's crazy.
Making baskets
doesn't just mean
braiding baskets for a long time.
We can do more than just braiding.
Braiding alone is already exciting,
and if you then go
into other materials,
from hazelnuts,
to barley,
different grasses,
it's incredibly diverse.
Bamboo in Asia,
you can never learn
or master it.
I think that's great.
And the range,
from tiny little things
to architecture,
and also from the products,
from jewellery to
house decor in the fences,
it never gets boring.
I also try to educate myself,
to learn new techniques
that I haven't been able to learn
in other countries.
I think it's important
to look over your own
basket frame.
Overall, you also have to
switch on your brain
to secure your survival
with your job.
So it's not like
some people imagine
that I work all day
or sit in the office.
And if you look at this,
all the steps,
the time,
it's clear to you
that a wooden basket in a hardware store
for 10,99€
can't be made in Germany.
In the end,
you have to decide
how far the support is.
It's not so good here either.
Now we're going to cut
everything that's left
so that it looks inside.
And later it will be
cut cleanly
on the inside.
Meanwhile,
the basket is actually crooked
and growing.
Moisten it again
and the game starts again.
The next bundle of
weeding
is moistened again
and then it starts.
What the basket maker
calls the second layer.
Because weeding is final
and if it should be a little higher,
it is layered.
It's like concrete.
It depends on what you make of it.
That's an advertisement.
So it's archaic,
something very original.
A writing professor
of the ETHAN Kummers,
Prof. Stüppe, who said
that you can't lie with weeding.
So it's a fundamental craft.
You just see whether you can or not.
You see every breaking point,
every starting point.
An honest craft.
It made the leap
into the modern.
The craft in itself,
in any case.
It's just that
a lot is imported.
Because the working time
is extremely high.
And like in all other areas,
it is no longer paid
necessarily.
That's why a lot of effort
is produced.
I did an Indonesian internship
in a furniture company.
The workers get one euro a day.
You can't keep up with them.
By the way,
now it's back to it.
Now it's about
nice, crooked.
Especially because it's such a short stretch.
I really have to make sure
that they don't slip out of the level.
Because you can see that later
in the edge.
And then the weedings,
my braids are almost thicker
than the strong ones.
You have to be extremely careful
that it doesn't get out of shape.
Now I cut off
all the ends.
And we'll see
how our basket will be.
Okay, it's not really crooked.
It has an eight.
And that's not even regular.
But it will still be beautiful.
Or just because of that.
Now I'm going to put
a few more pieces
on it
to get the height
on the sides.
So that the swing
will be nicer.
What I like the most
is that I can really
implement my ideas
directly with my hands.
And it will be
the way I want it to be.
Hopefully. Or also the way I feel like it.
There are days
when I know exactly
that I don't need a nice, crooked basket.
It won't be nice and crooked today.
So I find that exciting.
So far she has worked
for a good three and a half hours.
Only the edge is still missing,
the final edge.
I now wedge it with four wedges each.
So before two, behind two.
In contrast to the main edge.
I can still correct
with this final edge
at a strong distance.
I'm going to put two more
stones in here.
So that I can push
it down better.
And then comes
the right edge.
We call it the wedge.
There are many different
edge shapes.
I always start the wedge
at a point where I will
be able to see
the stone a bit.
And it won't stand up later
when there is a wedge on it.
And I bend the wedges.
I hope they don't stretch.
First carefully over the wedge.
It's kind of a distance holder
for me.
Because I have to pull the wedges
again at the end.
I take the wedge.
Behind one,
before three, behind one.
Now I have to
be careful
that it doesn't fall off.
Because the wedge is bent
over 90 degrees.
That's a big challenge.
It's already broken.
Normally it doesn't
fall off.
But I can
put it back on.
Now I see
that there is a slight twist.
Because of this twist
the wedges split
a bit.
As you can see.
A bit exaggerated like a cord.
That's why it's
more elastic.
If I would just bend it.
There are also wedges
that are not bent.
You see that
most of the time.
Now it's pulled here.
That's why I put the wedge
in the beginning.
Because now the wedges
have to be pulled in again.
So that you don't see
the transition from too strong later.
The master craftsman once said
unobtrusive and durable.
That's the motto.
Unobtrusive and durable.
I'm done with the wedge work.
I'll take a look
if it fits.
And what's left
will be cut off.
We call it cleaning out.
That's not my favorite activity.
But it's part of the job.
Because of this
wedge up here
I can cut really close.
So nothing slips out.
I just lift this
wedge one by one
and cut very close,
diagonally with the scissors.
And then you don't get stuck later.
That's it.
It fits.
Now I just have to
clean it out.
It's a bit like cleaning up
the kitchen after cooking.
If you've already eaten.
Only the wedges are missing.
Exactly.
Depending on the customer's length
and customer's wish,
you can adjust with plastic or leather.
Yes, we have it.
The great art
to weave a beautiful,
crooked basket.
Compliment.
Voilà.
