Big Wall #9 of 14 - http://www.bigwalls.com Anchors can be the leak in your time boat. You can lose so much time if you don't have anchor skills dialed. If you can't build the anchor quickly, if heavy stuff smashes down what you want to unclip later, if the bag is on the left and you have to haul towards the right, or are just completely unorganized. You can shave your aid leads down to a quick half hour a pitch but lose it all at a 2 hour anchor cluster... OR you can take a casual hour to lead something but make up for that by doing your anchor, hauling and change over in 10 minutes.
00:00 Intro 02:33 2 bolt anchors by Jeremiah 07:34 2 bolt anchors by Ryan 14:14 3 bolt anchor by Jeremiah 18:12 3 bolt anchors by Ryan 23:01Trad anchor by Ryan 26:04 Trad anchor by Jeremiah 32:45 Staying organized
We're going to show you big wall anchors in this episode. If you can climb really fast,
and if you prepared really quickly, but you don't know how to build a organized and efficient anchor,
you can really hose yourself because it's the foundation of how fast you're able to do
changeovers. And a lot of the things that hosed me in the past were arriving to a clustered anchor,
or setting something up that had the heavy stuff on top of the other stuff, smashing it.
So putting things on the anchor in order helps you take it off in order and helps the person
who's climbing going to be on the correct side. But more importantly, the bag is going to be on
the correct side because it doesn't lift itself. Jeremiah is going to show you his methods with
a cordelette, and I'm going to show you my methods with a quad anchor. So you can see two different
ways of skinning the cat, though they both work. His method is a little bit more versatile,
but it weighs a little bit more, and the quad anchor is lighter, and you can just decide for
yourself which one works best for you. So if you go read the big wall Bible, you can potentially
get dozens of people's way of accomplishing this thing in the most efficient manner,
depending on the different contexts you will come across as you go up the big stones.
Now this course is entirely free. I don't even ask for your email to go look at the big wall Bible
or look at these videos. And so I thank the people who make that possible, which is the patrons who
support this channel with $1 per episode. Literally being able to get this out to more people allows
us to only need 1% of the audience donating $1 per episode to make this viable. If you can't afford
or just don't want to, that's okay. That's the point of doing it this way. If you can click like
on the videos and subscribe, that really helps us out and doesn't cost you anything. Now I don't
live on donations. A hundred percent of that goes back into the channel, but I do have bills to pay
and Rocky talkie helps me pay some of those bills. And I was using these Rocky talkies before I ever
got sponsored by them because I had so many epics when I used normal walkie talkies that were
unreliable. Now, the people who design these are climbers themselves. They have a small,
but growing business, and they tried to make the best walkie talkie possible. That does not require
a license. They're very reliable. They're lightweight and the battery lasts a long time.
And you can get 10% off if you go to rocky talkie.com slash how not to, and this is a gear
intensive sport. So whatever you buy at extreme gear.org supports us with 10%. And the proceeds
go to the cave exploration society, which are doing cave exploration projects around the world.
So your money's going to great places. And of course you can grab a beautiful, I love El Capitan
shirt at how not to swag.com. Now time for the anchors. We're going to talk about how to do a
two bolt anchor here. Now I pretty much use the same system, whether it's a two bolt, three bolt,
or even a gear anchor using a cordelette. One of the points that I want to bring up here
is the value of using big lockers versus using little lockers. Now little lockers are nice for
connecting things as a carabiner, but I like working with big lockers anytime I'm working
with an anchor because I have more to clip to. So start changing over to big lockers if you can.
First thing I'm going to do is I'm going to get some lockers on my
anchor. So I'm going to take one free locker on the tip and flip it upside down so then I can
always screw down so I don't screw up. The next thing I'm going to do here is I have my locker
that's on my cordelette. I'm going to take that locker off and I'm going to connect that to my
anchor as well. I'm going to take my cordelette and I will show you how I re-rack this back up,
but I start from the middle and I let it drop. I take this and I clip it into my locker,
but I don't tie any knots. I'm going to keep it unlocked for a second and then I'm going to come
back up measuring roughly around my chest level, visualizing how much rope I'm going to need for
my knot. Then I'm going to tie a clove onto the other locker and I can start right here with my
first anchor. I'm going to do a BHK using a super figure of eight and I'm going to be focusing on
the direction of pull. If it's not, that's a good example. I'll leave that open for right now.
So there's my BHK. If I have my jugger coming up in this direction, I would make sure that
my direction of pull matches up with that force, but notice that I don't have a ton of material
here so I want to make sure that there's enough for him to be able to clip into or utilize these
loops. This is a little bit too tight, so the reason why I like to use a clove here is it's
easy to make those adjustments without me having to totally untie the entire anchor. So I'm just
going to disassemble this again really quick. So I noticed that I needed more material than what I
had, so the reason for that clove again is I can just feed in without having to open any extra
lockers or any adjustments. So there's that. So again, I can do with my BHK if I need to
with a super figure of eight. There we go. And now I can lock it down. So right off of this,
I already have everything set up I need for my hauling system and my line fixed section because
there's two strands that I could end up hauling off of or docking my bag off of and having them
jug off of that line too. There's that option. Now if I like to have a little bit more space,
I can create a whole separate anchor by using the rest of this cordelette by again, you guessed it,
another clove, but I bring it to the right locker. There we go. Let's pull there.
And again, I might be looking for my direction to pull and tying figure of eight or super eight,
whatever you like to do with the material you need. So again, now if you look at this anchor,
there is a lot of clip-in spots. I have this master point. I have this master point. I have
this master point. There's this shelf up here. There's this shelf up here. What's a shelf? A
shelf is just an extra spot that you can go indirect on. You could haul off of. It has a
fully supported redundant location on the knot. Clipping these two strands is not a shelf.
Clipping in between just one loop is not a shelf. A shelf is always a redundant piece that it
connects between your anchor. So one side in between and one side in between that is fully
life-supporting. But the reason I like this one is there's a lot of clip-in spots, a lot of
attachment points to it. The downside to the way that I do this anchor is sometimes if I was to
dock my bag on this loop down here is they cannot start cleaning this anchor until this haul bag
is unweighted and gone because you can't clean an anchor that's being weighted. So that is a
downside to this anchor, but I really value over beefing stuff and it's very, very similar. You'll
see in my three-point anchor system that I do the same. Did I need this extra master point though?
That is all you technically need right there. Why are you laughing there, Ryan?
Man, if only you could see how much we are disagreeing on the camera before we even start.
He said he doesn't think there's any value to a small locker and I don't think you need more
than two big lockers on the entire big wall rack. Well, that just shows you can skin a cap more than
one way and it's kind of nice to show you two different ways. My goal is to be able to show
you a hundred different ways. And if you give us your feedback of how you do an anchor system or
any specific thing, we can add it to the Big Wall Bible. So this is a big, I'll step on it here,
is a 240 centimeter Dyneema sling. And if you make it into a loop, it'll still be out of frame.
And if you tie an overhand knot on one side of it with the sewn part not in the knot,
so that's just then, and I'll do the same on this side. And this is what's known as a quad anchor.
Now, typically you kind of have to have your bolts in a certain range for this to work.
And I'll explain all the components of this because I already have it tied all the time.
And that is what you see right here. Now that I'm done installing this, I will lock those.
And I have my big HMS or pear-shaped carabiners here. And we have a whole quad video about this
where we broke test this and showed that if you clip the shelf, which all you have to do is clip
these two strands and it sits on top of that knot. A little bit anticlimactic. 13.1 kilonewtons.
So I have one, two, three, four, five, six, super bomber things that I can clip to. This is
just a simple anchor. I think those are all my thoughts. Let me rebuttal some of the things
that Jeremiah said. He likes to use seven mil cordelette. His rope is more abrasion resistant
than this material. Dyneema is more slippery, so it's harder to actually abrade. So it's all
basically super good enough. As far as strength goes, if you do use a carabiner like this up here
and you put it in this way and you put it in this way, you are putting all the force on the
gate side of the carabiner. Not a big deal. It does break maybe, maybe 50% lower based on some
studies. I actually have tried to recreate the failure point being a lot lower on a pear shape.
I have yet to be able to do it, but you want to be able to understand that your carabiners
are stronger on the spine, and so just be aware of that. But if you're clipping and clothing,
it's nice to have the gate on the outside because you want to be able to just take your rope and
clip it in. I just don't pay attention to it because it really, to me, doesn't matter. Either
way it works for you. It's super good enough. I just clip it to the thing. So if you're doing
anything in the realm of what Jeremiah is doing or what I'm doing, you're talking about 40 plus
kilonewtons. Don't worry about strength. Make sure, as a highliner, we're more worried about
abrasion than literally anything else because if a tight piece of webbing is being rubbed on the
rock, it's going to snap. Same with this. Be mindful that this bolt's not back and it's not
doing this. That would be a problem. But if you think about the forces you're applying to this,
someone jugging is maybe a kilonewton, give or take a half a kilonewton, and hauling is just
your bag doesn't hopefully weigh more than a kilonewton, that's over 200 pounds, and I am
under a kilonewton. So let's say if you are one and the bag is one, that's only two plus friction,
so no more than three. You're just not getting crazy forces and the bolts are super good enough
on any routes you're climbing on El Capitan, and if they're not, you're going to know it.
So you will have to either back it up by starting the next pitch and extending down that gear,
but don't be afraid of the bolts and don't be afraid of clipping the metal to the metal.
You just don't want a long chain of carabiners because if something gets twisted, it'll pop off.
Whenever I fix, I do have two carabiners here. I make sure I match the same size,
otherwise it's just not, it's totally fine. If this is all you got, clip me in that way.
But I'd prefer to have this carabiner down here. As far as versatility goes, I don't need
more versatility in most cases because I will make two points. This is a master point,
these are points. And if something's here and there and there and there, I will take all those,
the giant wad of slings, and I'm going to equalize and equalize and make two points
that I can build an anchor off of. You don't ever want a bolt out here and you have this
wide obtuse angle. We don't have to be an engineer to know this is going to add more force to this
bolt than the force you're putting on it because of the angle. Just know that you want the angle
to be more acute. And I can't think of a pun. You just want the angle more acute.
And most bolts are already pre-installed. Most things you're doing on El Capitan
or the trade routes you're doing are going to be about this far apart. More oftentimes than not,
I'll have the two good bolts when I get up there, but sometimes the old bolts that they've replaced,
they might have left and you might have a third bolt to work with. And it might still be super
good enough. Rust doesn't mean it's dangerous. It just, uh, I think it looks really bad. Not
all rust is bad. Sometimes it's just surface rust. If you're in Tonsai and it's rusty,
it's probably going to snap off under body weight. But on El Cap, why is that? Because
the SCC or the stress crack corrosion, it's called how not to chemistry between the salt,
the limestone, all this stuff. It'll eat, it'll eat, it'll eat metal. El Capitan doesn't eat
metal. The problem is the old bolts were a lot smaller. If you see a three eights bolt
and it's got a little rust on it, don't worry about it. The last guy didn't pull it out.
It's all you got to trust. If you can back things up great. I find a clean, simple anchor helps a
lot with changeovers and staying organized. Now what happens if you have all this gear on you
will cover in a little bit when you want to take it off and dump it on here. There's a way to do
it in a way not to do it, to not cluster this up. But let's have Jeremiah show you a three bolt
anchor. So I'm going to just show how I do reassemble my cord let is I always start with
the two ends and then I give myself tiny little T-Rex arms, but then it's really just reflaking
the rope back over your head just like we do, but it's little arms, not big arms. And then once I
leave, I don't know about like three feet below me, two feet below me, take it off my head.
I take this and I fold it back in half again and then I wrap it around. So then the middle is
always able to peek through that little hole there. So that's how I pack my cord let up. So
then every single time that I need to deploy it, like for this beautiful three point anchor that
I'm about to make, I go ahead and take my locker and clip it to the bolt, drop it. It always comes
untangled very nicely. That goes there. Take another locker. This time I'm going to clove,
again, assessing to how much distance I'm going to need. That's good enough for me.
And then I'm going to lock that guy down. And then my next locker,
again, going to measure my distance that I need, tie a clove, lock it down.
And then the right side is for one thing, the left side is for another thing. I can decide
which way is my juggernaut going to be coming up and which side does my haul bag need to be on.
So if my haul bag needs to be on the right side because I see that the route is going to go off
to the right this next time, but it's also that can sometimes be very misleading because it's not
necessarily which way is the route starting, but you should be thinking about where does the next
pitch end at? Because you might be starting in this direction, but ultimately the haul line ends
up needing to be way off to the left. And ultimately when you bring that haul bag up,
the haul bag truly had to actually be on the left because it ends on the left, does not just go to
the right because it starts going to the right. Very important to always keep in mind where does
the haul bag need to go when you need to lower it out later. It's an important point. So let's just
say that I am going to be docking my bag on the right side. So let's go ahead and do that.
Now, if I have plenty of material, it doesn't hurt, doesn't take more time for me to do my
super figure of eight. And while I have four clip-in spots, uh, one, sorry, uh, three clip-in
spots, one, two, three. And then wherever my jugger is going to be coming from, if they come
in the same direction, direction of pull that way, if they're coming from another direction,
then I might be orienting it in the other direction. Now, those that are watching this,
yes, I am fully aware that these, this beaner is taking two different pulls of direction there
as this thing is getting weighted with a haul line or whatever. And this one is getting pulled
in the jugging direction. This is something that I am okay with, um, because there is no perfect
system. It's something that I'm going to allow for that direction. Now, if it's both in this
direction, this is fine. Even though I understand that this strand is not taking the load,
this is taking most of it. Again, every system has downfalls. It's some, this is super good
enough in my case. It's taking technically, if they're both pulling, it's taking the load from
this one. True. Yeah. So to me, it's still very redundant. You know, it's a super incorporated
anchor. I have a lot of spots that I can end up clipping to, but again, I have in this scenario,
I have 1, 2, 3, 4, 5, 6, 7, 8, 9 places that I can connect stuff to, um, including haul bags,
my partner, as well as gear or even base camp. Let me show you how I do my three-point anchor.
As you can see, I still have a quad, but I took these two bunny ears and spread them out
to the other bolt. Now, before I clip this to this third bolt, I put on a poor man's rigging plate.
It is a pear-shaped carabiner because what I want to do is I want to clip my protraction in this
case to my right side, because I want to dock on my right side because the bag's going to go to the
right side. Let me give you a, an example of why this is so important. I need to emphasize this.
I don't care how long this makes this video. If the bag is here and you're not hauling straight
up and you're going to be hauling 45 degrees that way, and it's too heavy for me to lift
as the follower and you start going and I need to, and it's coming up here and it's going across
my ropes, my everything. I can't lift it high enough and the leader can't haul it up enough
to get it off the anchor. This is where the releasable system, the muncher mule overhand,
or even the adjustable daisies that you have come into play. But if it's on this side of you,
it's going to want to just swing through your system and you're going to try to be like
thinking small to get this thing around you. It has hosed us for hours before and it was awful.
So if the bag goes right, put the bag on the right side. If I do clip my protraction up here,
it's going to be sideways against the wall and I want to be able to pull outward and I don't
want to twist on this. So either I fix that through a variety of solutions or I clip this
now second carabiner and I'm able to haul and I'll put my hand here and I'll grab my Rocky
because it's so bomber and I'm going to push and push and push and that is the hauling video.
But you can see that my protraction is as high as I can get it because I want to dock my bag as
high as I can because I like to sit on it and get into it. If it's too low, it's hard to grab some
stuff if you need it. If you move as fast as Jeremiah does, you don't have time to sit on
the bag. So let's evaluate this based on a traditional climbing analysis of this. Is it
Serena? Is it strong? Yeah, we've tested this. Is it redundant? Hell yeah. We're in all three
points and everything you're clipping to is going to be connected in some way or another.
Now this shelf, I would clip two strands. This shelf, I would clip two strands. This is not
redundant. I mean, if you're clipping a rope bag to it, whatevs. R-S-E-R equalized. Did I
skip equalized? Oh, I skipped equalized because it's last on my list when I'm big walling. This
ironically does a pretty good job. This is why quad anchor shine is because you get a little bit
of play here. But once you add that third bolt in there, I'm still equalized on two. One's strong
enough to hold you. You just want it backed up. No extension, which means if this were to blow,
it's limiting how far down it goes. Now, if you see our shock loading is a myth video,
you'll see that this is only bad-ish if you're connected directly to the anchor.
But if you're jugging and have a hundred feet of rope between you and this, the rope's going
to absorb some of that fall. But it's still good practice and it gives you a shelf to have no
extension. What other myth is there out there that's not that important? Serena? And then angles.
Angles. Yeah. See that video. You get to plug every one of your videos. Yeah. It's awesome.
Yeah. Serena is important to aim for. Who cares? If you're using bolts, the caveat, right? We'll
get into if you're using some sketchy-ass cams. If you're using sketchy-ass cams, you're climbing
A5 and probably good enough to be able to evaluate that yourself. And remember, like we
talked before, you want to keep your angles less than 90 degrees if you want your bolts to never
see more of the load than you are putting on it. But I'm a slack liner and you turn death triangles
into a sport. So just be mindful of how forces interact with this. And so what you should do is
go watch 200 videos on this channel to understand how carabiners break, protractions break, and
quads break, and the list goes on. You can go to the content page of our website and filter out
exactly what you want to see or who you want to see or where you want to see it. And it'll show
you the episodes so you don't have to go through some wonky playlist. Now, let me show you how I
build a natural anchor where I have to place my own pro or supplement a one-bolt anchor because
there's a big bomber crot next to it. I like to have every point be two things. And then sometimes
I have three points. Sometimes that means six things. They're cams, rivets, pitons. So in this
one, I have a rivet hanger and a number one cam and I've equalized them. And I'm demonstrating
this with two shoulder length slings because I had plenty on me and my partner doesn't need that
many to do the next pitch. And we're going to bivvy here tonight. So in this case, I like to
just have this super beefy equalized wad of slings. But on this side, this is more realistic
where I'm going to just have a single sling and a sliding X. I do like sliding Xs more than a BFK
or a big fat knot because this way, these two pieces are going to share the load. And I want
every point to be truly, truly, truly equalized. This is when equalization matters to me. Once I
get past this point, then I'm still pretty equalized actually. And this is called in this
slackline world now, cascading anchors, where you go from an equalized sliding X to an equalized
sliding X, which is kind of what the quad is. And this is the best way to keep an equal force on all
the pieces. Now, if you are running out of slings, but have an abundance of cams for some reason,
you can manually equalize and you'd let, say, put this guy in first and then you would put this guy
in. And you want to be able to, you know, clip to something that's bomber, but you can just push
this guy higher until it's kind of holding some of the force and some are holding the force. So
if a cam slips, it's going to slip just a little. And now it's holding more from here and it's
taking a lot more load off. It's a lot harder to pull two cams out than it is one, not always
required. This in a solid crack is bomber. It's going to be eight kilonewtons at the minimum.
It's in a good crack, but sometimes if you're trying to like haul a massive load, not that I do
three to ones, but let's say you're doing that and you got three people jugging and you have a show.
Yes, that's happened with me. Um, you'd really do want to have some really strong points. We
have blown an old piton before and snap the head off at an anchor. And luckily we were redundant
and we didn't have too much of a shock load on the other stuff. Now you're going to be climbing
a route, right? That means there's going to be something, someone's going to be clipping to,
unless you have 30 feet of hooking to do after this, you can go vertically and get the next bolt,
get the next pieces in whatever. And then like double length sling extended or use Jeremiah's,
uh, seven mil cordelette might be nice for that. So you don't always have to think horizontally
with an anchor. You can go pretty vertical in your scenario, which will cover how to put a
portal ledge on something like this because you don't want to put your portal ledge right here
and then you can't get access to your bag and stuff. So we'll cover that in a little bit.
Jeremiah is going to show you his all natural anchor. So one thing I do want to emphasize
before I get to talk is every anchor you arrive at is always very different and you cannot just
use my system of how I do things and you cannot just use Ryan's because everything you have to
adapt to and manipulate. Um, so this is one of them of how I would still use my same one cord
to attach the same process. Uh, one little point you'll notice that's different about mine is that
even as it's getting loaded, that master point is a little bit higher up. So if you are trying
to attach things, you don't have to have a master point that's way so much lower. This allows you to
still be able to get the same, uh, use and same pieces. And what it actually leaves me with is a
lot of leftover cord to still be able to do stuff with, which I'll show that here in a sec of using
those leftover cord. But what I have here in simplicity is I have starting on one end of my
rope is actually a bunny ears eight equalized. So one piece is going up to my piton and one loop is
going to my rivet hanger on the other strand is another bunny ears eight somewhere in the middle
of the rope if I want. Um, and then that goes to my cam and goes to my other rivet hanger. So again,
equalized to whatever length I need. And then those two come to a master point. That's also
another bunny ears eight. So if one strand was to still break, I still have my other one and I have
redundancy in my master point. Now this is a little master point. I definitely wouldn't make this a
little bit bigger, but it's just a point to show that you can still tie it. I would just need to
adjust my system. Now what I can do, and this is not what I would always do, is still have a second
point to be able to go for docking my haul bag if I want. Let's say I would not want to attach my
haul bag up to a rivet hanger. I would not want to dock my haul bag to just a piton, right? In this
case, I like to actually have kind of a lower haul bag docking station because it's a spread
spreading load against all of my really bad pro. So with that, I just kept running the line back
up to a clove into the shelf. Uh, the reason why I went to the shelf and not the rivet hanger is
again, it can spread the load between both of these pieces and not just an individual piece.
Um, now if I wanted to, let's say extended this anchor over for more clipping spots for a base
camp or, uh, living on the wall for the night is I can take the rest of my cord that I have and run
the cord way over to another point that's way low. And now I have plenty of material and I can put
things onto this. I can clip it to this. If it's just like things like my bags, not a fixed rope,
not a haul line, anything like that. It would just be like my food bag. There are a couple
of issues wrong with this point is that this angle is well over 90 degrees at 90 is nearly a one-to-one
force. This is going to, uh, make the force over here much higher. Uh, plus there's no redundancy
within this. This is really just for an example that you can attach extra little things to
your rack. It's meant for your rack. Correct. Yeah. Now, if I wanted to,
what this also still allows for me to be able to do with this much material is so right now I have
my main master point here too with my four pieces. Now, if I realize that I do have another piece of
pro that I could get up really high, I could go get that other piece of pro and incorporate this
into the anchor since I have plenty of material. So I'm going to go do that, especially since one
of my cams just fell out of the wall. I was so going to make a joke about that.
What knot are you doing? I'm doing a clove hitch there. I love cloves. I think cloves
are just the king. I understand, but they're not a knot. I didn't need you to explain why.
It's okay. I just wanted to know. Patrol, patrol. You're so defensive at all. I wanted to know what
it was. All right. There's a, there's another master point. So now you can kind of see even
that. And what that also allows for me, I understand that when this gets weighted,
that it does shift the weight, but it just does add an extra bit of security that even
if all of these failed, I mean, it's still incorporated into the system as well. And
again, still with all of this, look at that. Another clove there. You look like you've tied
a clove before. Just a couple of times. And in this system, I mean, it's one piece of rope.
Yeah. There's a lot of lockers and carabiners in this, but I mean, it's one piece of rope that
does incorporate a lot of use, which I like, especially when I'm on my portal edge camps at
night, I like to be able to have a piece of string kind of run across everything and interconnected.
And I'm not having to use a carabiner and a sling for this and a carabiner sling for this to
disassemble later on because I might've needed it to fix the next pitch for the next morning.
Anyways. So a lot of it's just problem solving and adapting to whatever scenario you have.
I have used slings many, many times, and then also use my cord to get to those pieces.
So just some complexity to overthink that a lot of these anchors aren't just straightforward
all the time. You do have to use some problem solving and thinking through them. There's two
phrases that a lot of people use is Serena, but there's also another one I want to mention,
which is called Ernest. And Ernest ends with a T what the team means is timely. So in this case,
this might not fall under that category of timely because I did have to spend some extra time
readjusting and equalizing and all that stuff. But ultimately you want to be able to get your
anchors down to be built very, very quickly. It should not be taking you a half hour to create
a safe and redundant anchor. You want to be able to get that thing made and everything fixed within
under five minutes. If you arrive to a nice clean two bolt or even a three bolt anchor,
that should be able to be done in under a minute. You should be able to just go,
it does not matter if you have a quad or a quarter let you should be able to make an anchor
immediately. Try to anchors and all this extra stuff does take some complexity, but even still
this, I think this still took me, what would you say? Maybe seven minutes with equalizing things.
It's more important to get the pieces, right? Yeah. It's important to take your time where it
matters, not because you're incompetent because you didn't practice at home. Exactly. If you have
it all ready to go, at least with my setup is I would flip it like this, boom, clove,
fix, bite, butterfly, whatever you fix him with, maybe a little slack for me, clove up here.
Done. This should not take a long time. If you over-engineer this thing, it can suck. But what's
cool is I have a daisy that is going to allow me to clip here. And I could come all the way over
here to this lovely bolt. If this is, some anchors have that. And if you use a daisy chain, you can
now clip, let's say I don't want to carry this anymore. And to emphasize, he did not convert me.
This was the easiest way to put gear on. Oh, wait, it was the easiest to put gear on to change over.
Yep. But I climb in blocks, so I don't need to change over very often. And if I want to take off
my Rocky talkie and keep it handy, it's right there. That was sweet. Oh, shoot. They're both
up here. How are you communicating with me? If you want to set up a portaledge for the night,
and this is a hanging belay, you can't have your bag, your portaledge, your gear and all your stuff
in the exact same place. You have to pick if it's going to be below or above or whatever.
So I'm going to show you my favorite way. If I don't have a way to go horizontal,
is to go vertical. We're going to finish this episode off by me showing you the portaledge
connected to an anchor. That's really high. This is what I call a vertical scenario. If I don't
have the option of a horizontal scenario, and I almost prefer this anyways, is that easy to get
in the haul bag, which I'll show you in a second. There's a lot of components not here like my rack
or a partner and the sleeping bags and everything. But as I pull everything out of the haul bag,
everything has a carabiner. So when I hand it down to my partner, they can clip it to
all these different clipping points we're going to have or to the edge of the portaledge. You'll
notice I have one ater clipped to my partner's ater, which is clipped to the quad anchor up there.
And I want these spread out left and right as much as possible. That makes sense.
So I can climb this. This is how I go up and down easily. That is how I go up and down. That is not
how I stay safe, obviously. So I'm on a Grigri if I'm going to be moving around a bunch. And,
you know, that's what you do with those. But this allows me to move up and down safely.
And then if I want to just, when I get up there, stay up there, I have my personal anchor.
I've already taken all my gear off because I don't want to sleep with my gear on.
And we've already racked it somewhere else in this imaginary scenario.
So I want something out of the haul bag. I don't usually go up very often because
I pull everything out, hand it to my partner, and they clip it here
underneath this haul bag to this daisy or to the corners of the portaledge.
I'm going to go up and I'll stay on that guy nice and snug.
And I kind of want to just hang out here for a second and talk about another point. If you are
going to bring a fly and think you might use it, you install it when you install the portaledge.
When I open all this up, I can just drape it over. And you can see it says clip side.
And you see it says clip side because this is shaped to go a specific way.
Did you write that or did that come with the fly?
With that handwriting, that was definitely something I wrote.
So is that something you would add to your prepping list?
Yes. I guess we'll have to redo that whole video.
There's actually going to be a lot of tips, even in this scenario,
that I can't cover and keep this video under 10 hours. So make sure you go to the Big Wheel Bible.
Anyways, you can see that my master point, extended master point, is almost at the base of
this bag. Sometimes, if Brent's wall would allow it, I would probably have the master point about
right here. And I used my other quad anchor in order to extend my true quad anchor up there.
You can see how much of an angle the portaledge has with all of the slings.
And typically, I don't want them that tight at an angle, but we don't have the height here.
But you can't fan this out without hitting your portaledge. And if you have a two-bolt anchor,
and you have no way of going horizontal, you can't have your bag and your portaledge right
next to each other. So if you put your bag below your portaledge, it's going to be very hard to
reach in and get stuff. Now, in order to get into my haul bag, I'm going to climb a little higher.
Right there. Right there. And I want to be about the height of the portaledge, or the haul bag,
to directly hold. There we go. And I'm backed up on my rope. It's very important to ask yourself,
how am I clipped in right now? I'm not just on one personal anchor. I'm attached
to the actual climbing rope that's fixed to the anchor itself. Now, I'm going to hand this down
to Jeremiah. Let's pretend he's there. And I'm going to hand the next thing down to him. And
everything I hand to him is going to have a carabiner. If I have a jug of water that doesn't
have a dedicated carabiner, he's going to have some spare beaners handy. So everything I clip
to him is going to be attached to something. It could even also be attached to the end of the
ladders, as long as you don't put too many things. Because as you climb back up and down,
you can, if it's a food bag, spill your food. Notice I'm not getting all the way in.
This is actually very comfortable for me and I can get all the way to the bottom.
Another use for the docking cord could be connecting stuff.
Okay. And this would have the hole in the corner for him to clip to as soon as I hand it to him.
I'm going to come back down to him. Checking, checking, checking. And there's almost no reason
for me to come back up here. It's not very heavy. Most of the stuff is with us. We can clip stuff,
especially if the portaledge is lower, up here and even here and here and here like food bags.
And it doesn't hit us in the head at night when we're trying to sleep. And if you haven't seen
our living on the wall yet, here's a little sneak peek to that episode is you have to be careful
where you step on a portaledge. If you step on that side, these straps keep you from going down.
If you step on this side, there's nothing from keeping these straps from going up.
So if I step on the outside, I'm trying to get some rocks there. It basically does this
and your partner falls out of bed and you lose a friend. If they survive, they're not going to
want to be your friend. That's how you lose the friend. So understand how your portaledge works
by doing what? Practicing, which is what you should be doing with everything you're watching
in this video and all the others. Go to the Big Wheel Bible in order to learn more.