Top O' the mornin to ya! We couldn't let March go by without some kind of St. Paddy's day craft! This week we made a DIY Welcome sign door hanger! We used our X-Carve to cut out our shamrocks & top hats, added some paint, ribbons and sparkle and our door is the envy of the neighborhood! Come watch us show you how make this cute lucky charm for your front door! #xcarve#StPatricksDayDecor#cncCrafts
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just made this St. Patrick's Day inspired front porch welcome stein door hanger and we did it using
a piece of $2.50 MDF. Threw it under our X-Carve CNC machine. Threw some paint and some wax on it.
Bam! Lucky for us it turned out great and we'll show you how we did it right now. What is up?
Welcome back. Do you like to do it, build it, or make it? So do we. So much so that we do it every
week. Megan knows that. Megan's one of our patrons over there on Patreon. If you want to be one too
I'll leave the link down below. This week we're making a front porch welcome signed door hanger.
It's St. Patrick's Day so we thought we'd try to get lucky and pop off something cool for the holiday.
Step two. Now we're going to make all of our cuts. Actually I'm just going to take this down to our
CNC machine. We use an Inventables X-Carve and I'm going to cut out all of our little shapes.
It's only going to take like 30 minutes so I'll be right back. You can actually do this with chipboard
on the Cricut if you wanted to. Kind of like I did that Grinch sign back at Christmas time.
But we're just going to do it in this uh using the MDF this time. I made a cut file in Adobe
Illustrator and I'm going to save as an SVG. Import that and then I'm going to go over to
Easel which is Inventables software that runs the X-Carve and I'm going to import that SVG.
I'm going to size it and then I'm going to select cut on shape and then I'm going to hit color.
Step three. Now we're going to paint. We're going to put some chalk paint down on the letters.
This white chalk paint. We got some dark what is this acrylic paint for our little hat pieces
and some light acrylic paint for our little shamrock pieces. My favorite part of painting.
Yay. All right I'll give you a little little plate.
Step four. Now we're going to put it all together. We're going to use some Gorilla Glue
to glue the little hat pieces on for the big hat and the letters to the hats and the shamrocks.
I'm going to use this little piece of glitter paper as a guide when I'm gluing the uh
the letters on. They're still a little wet.
Make instead of the O in welcome I was going to use this little shamrock in gold and I guess it
looks pretty good on the camera but looking at it it doesn't have enough of a gold sheen to it.
Pop. Doesn't pop. It has I was using this metallic gold paint but I don't it's again
it just doesn't have enough so I think what I'm going to use is this gold glitter paper.
Now I would suggest using some glitter vinyl some adhesive glitter vinyl but I didn't have any gold
adhesive glitter vinyl so sometimes you just have to make do with what you have. So I'm going to cut
this out and glue this piece of paper on top of this. All glued together. Gotta be gentle for a
little while still. Glue's still setting up. Now we're gonna give all the little hats little buckles.
Kind of make each hat pop a little bit. So we got some glitter paper. We don't have glitter vinyl.
I would suggest glitter vinyl and then on top of that since we're here I would suggest since you're
going to add vinyl to your wood I would go ahead and spray this with a coat of polyurethane and
let it dry and then add the vinyl on top. But because I don't have the vinyl we're going to
use this glitter paper. I think it'll be just fine. My door is under a covered port so it doesn't get
like direct rain or anything. No real weather. Okay so here I don't know if you can see our
little buckle here. Garrett's gonna fashion our buckle. So I've created a little strip for the
top of each hat. It is in the black glitter it's three quarters of an inch by five inches and then
the little gold buckle is uh is an inch and a quarter uh square. So inch and a quarter by inch
and a quarter. Oh okay. All right let's take this and cut two slits in it so that I could put the
belt through it. See that? Yeah. And then we're going to use our little Xyron machine here. This
is the Xyron 250 and we're going to make it a sticker. That's what I'm gonna do. Sounds
fast. Yes. Xyron. Watch it go. You just need three right? Yeah I just need three. So now I'm just
gonna stick it right in here and run it on through. Right on through the Xyron. Xyron.
All right now peel it up and it's a sticker. Boom sticker.
So cute. Look how cute that is. You see it? Can you see that?
Step five. Now we're gonna add some a dark wax. So these look really cute as they are
but I feel like they need a little dimension. Look at how cute this guy is with the paper.
So glittery and shiny now but I feel like it needs a little dimension so
we're gonna add a little dark wax on the outside edges just to give it a little
distressed aging look or something. Oh gosh that's a lot.
The thing about this dark wax is you only need a little little bit.
Yeah that looks good. That looks good. Don't you think? Yeah I like how it gives it a little bit
roundness to it. A little dimension. Yeah yeah yeah yeah. What do you think? I think it looks good.
What do you think? I think it looks pretty good. What do you guys think? Can you see that? Does
it look good? Let's show you some close-ups. Step six. We're gonna flip them over and add a ribbon
so we can hang it. Hanging door sign. All right so I think we're gonna just do like this.
I'm just gonna wing the spacing. Okay I'm gonna use this green polka dot ribbon. So cute.
And then I think what am I going to do?
Can you flip it flip it flip it and flip it once more. There we go. I think I'm gonna do it this
way so that it has some nice holding power. All right so I'm gonna do two strips down the back
with a loop at the top. All right and you want to cut that and then I think I'm just going to
hot glue it and then we're gonna use these tiny little nails to put a nail in each one to make
sure it's got enough strength to hold the weight. All right. She's hot. Careful.
Be careful.
Oh my goodness that's so cute. That's what we got so far. Yeah not done yet. Not done yet.
Step seven and now we add the accents. I guess that should have been more of an Irish accent
but I can't do one. Okay so I purchased some of these little glitter accents. I got those at
Michael's for just a couple of bucks or whatever. So I thought we could just hot glue a couple of
these on here. Give it a little bling. Bling it up. Something something. All right lay them out
Pretty snazzy huh? We are so lucky we were able to pull this one out this week.
This thing is a charm right here. He's got a million of them. If you guys like this week's
project hit that like button. Why don't you leave Kim a comment so she has something to do this week
and until next week maybe you could watch this video or maybe Kim's video.
I will see you guys next week.