In this DIY tutorial, we will show you how to create a stunning 4-foot front porch welcome sign planter using a laser cutter to achieve intricate and precise designs. Whether you're looking to add a personal touch to your home or want to give a thoughtful gift to a loved one, this project is perfect for anyone who loves to get creative.
We will walk you through the step-by-step process of designing and cutting the planter using the laser cutter, as well as assembling and decorating it to make a beautiful addition to your front porch. This project is a great way to show off your woodworking skills and create a unique piece of decor that will impress your guests.
So grab your materials and get ready to bring your vision to life with this DIY laser cut front porch welcome sign planter tutorial. Let's get started!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
we just made this owl themed porch
planter and we'll show you how we did it
right now what is up welcome back who's
ready for spring who's ready for a
spring front porch leaner kit we are and
we're going to be joined by our friends
Brad and pocketa today because not only
are we making it a vertical leaner kit
we're going to make it a vertical front
porch planter kit so we're going to be
building that planter got to have
somewhere to put those spring daisies
and I made this design myself from a
request from a patron but Garrett got
his hands on it and Zed it up a
little step one we're going to gather
all of our supplies we needed a a 1x 12
that was 8T long we need some qu in MDF
this is going to be all of our little
accent pieces we're going to need our
wood glue to assemble our planner and
then of course some paints and we'll be
using our foxy Hughes paints this is our
indoor outdoor paint this outdoor paint
has all of those weather resistant
properties so it's going to be perfect
to paint your planter as well as the kit
that's going to go on the planter with
our little owls on it for tools we're
using a 7in miter saw a brad nailer and
our Aon Nova
14 step two we're going to make all of
our Cuts we're going to start with
making our planter Cuts we're going to
cut two pieces at 9 and 3/4 in those are
going to be our sides then we're going
to cut two pieces at 11 and 1/4 in
that's going to be our front piece and
our bottom and the rest of it is going
to be the vertical
[Music]
[Music]
backer didn't make it
through it's
okay I'll take it out to the Big Brother
we'll get it done all right to okay
pocket take a break take a
break
[Music]
now we're going to make the top pieces
we're going to take this large sheet of
Quin MDF over to the Aon Nova 14 and cut
out all of our accents with the Nova 14
and the large bed size we can cut the
full kit on one sheet of MDF at one time
now we will offer the SVG
in smaller sections so that you can cut
it on your desktop laser and assemble it
onto the full backer but with the large
laser we can do it all in one large
cut here we are in Adobe Illustrator
this is the file I created for Garrett
this is our little leaner or porch
planter and she gave it to me to make a
cut file so first I jued it up just a
little bit yeah somehow once I handed it
to him it turned out looking like this I
was just uh gave it a little interest
then I took this and I pulled it apart
to make a cut file and now we're going
to import this file into
lightburn we'll import my
SVG I'm going to hold shift and throw it
on its
side now all of my red lines are for
cutting and all of my blue lines are
used for scoring and this is to place
some of the other things like the owl's
eyes and put the leaves back in I'm
going to add some frames and tabs to
this so that I can remove it from the
laser a little bit better and then we'll
send this over to our Aon Nova 14 to cut
out and because we're using the Nova 14
we're able to cut this in one sheet and
we don't have to separate this into
smaller pieces so I'm excited to see how
this looks as a one piece
[Music]
design
[Music]
[Music]
step
three now we paint we're going to be
using our foxy Hughes paints again this
is an outdoor paint so it does have that
UV resistant weather resistant mildew
resistant properties we're going to be
using this foam roller if you're not on
this foam roller life get on it because
it saves tons of time
this these paints with these pouches are
so easy to pour down right onto your
board here because this board is
untreated you do want to paint it with
outdoor house paint so it is sealed and
we're going to paint it on the front
back sides top and bottom we're going to
make sure every bar part of this board
is covered with this exterior paint and
look how quick boom we're halfway done
done halfway
[Music]
there now it's time to paint all of our
little top pieces or the accents I have
them all in a little frame with the
tabs we'll start with the we'll start
with the tree and the
letters all right and the
are going to take several different
colors of paint because this one's going
to be really colorful so we're going to
start with our tree is going to be in
Great Escape green and mol's Meadow so
that's going to be our light and dark
green we're going to use our three
shades of pink we're going to use
fantastic fuchsia Bun's berry blast and
possum pink these are three shades of
pink that's for the different owls and
and some of our words and then for the
blues we're going to use this double
cross Denim and then probably a darker
one over here I'm going to grab this
cutting Cobalt I think we need a dark
blue and a light blue and then of course
we're going to do our tree in this are
we going to use this light gray quick
sand quartz yeah in the I think the tree
would look good in quick sand as long as
it's got a nice contrast I might have to
play that one by a so all right let me
get these out of the way so I can help
you keep popping pieces
out now the great things about great
thing about tabs uh when you're using
such a large laser like the Nova 14
you're going to have a lot of pieces and
you're going to be pushing a board
through the laser in this case this was
all this all fit on the fit in the bed
but we can pick it up in one piece we
didn't have to pick up all the little
pieces by using the tabs now the trick
with tabs is is to to make sure that you
have the right uh setting so that the
tab just holds on by a tiny little
bit in this case we're just popping it
out of its little
frame Garrett kind of circled everything
in a frame so that we could lift it all
out at one
time
[Music]
n
[Music]
[Music]
if you like this project you can find
the unfinished kit where you can make it
yourself or the digital file in our
store at K&M it.com or you can join us
over on patreon where you get access to
all of our files and a whole community
of like-minded laser Crafters like
yourself and we love our
patons step four it's time to assemble
we're going to start by building our
little planter box we have our 2 9 and
3/4 and our 2 11 and a/4 we're going to
use one of the 11 and the quarters as
the front and these two little guys as
our sides we're going to run some glue
down them and then hit him with a 1 and
a/4 in Brad the nail not the
guy ready lovely
assistant all right these N9 and 3/4 are
your
sides and this one's going to be your
[Music]
front
[Music]
good all right now let's attach the
[Music]
bottom
all right here's our box now we're going
to attach it to the back yeah so let me
show you show them the little lip so
there is still a little lip see this
little lip here yeah that is going to go
face
down and Tuck right into the
backer oh first we need some
[Music]
glue
[Music]
all right so that's sitting on the
bottom
Perfect come around here I'm
[Music]
right-handed
all right the planter is all
assembled it's look a very
plantes now you can fill each of these
little nail holes with a little wood
putty Touch It Up Sand it and then touch
it up with a little paint super simple I
don't think anybody will even medic
right I don't think we're going to do
that right now but we can go ahead and
put the kit on right now yeah now we're
going to start to lay out our kit make
sure it's going to go where it's going
to go
this is a big kit so you're definitely
going to want to dry fit or lay this
thing out
first
uh so we make sure we we've got all the
pieces in the right
spots uh we don't want it hanging off
too much right no just a just the bushy
[Music]
part
now that everything's laid out well not
everything the pieces that are going to
go on the planter now that they're all
laid out we're going to glue them down
with some wood glue and then hit them
with a little tiny 5/8 in Brad the nail
not the guy just to make sure it sticks
to the planter right we just want to
make sure it stays over
time oh going in with the big guy first
huh well I think it's best just get it
out of the
way
[Music]
everything seems dry let's stand her up
and see what she looks like come on ow
who's ready to stand
up a little tall for the
ceiling and before we uh there we go
going to show you with a little flour
can't let me go without a little
[Music]
flour
go but now I think it needs a little
something in the front what do you think
maybe a monogram what do you thinking
[Music]
w