We want YOU… to build a six-foot Uncle Sam porch leaner! 🇺🇸
In this video, we turn two humble fence pickets, some quarter-inch MDF, and a whole lot of Foxy Hues paint into a big, bold, beautiful patriotic porch sign. Perfect for the 4th of July, Memorial Day, Veterans Day—or just showing off your love of red, white, and blue all year long.
From design to painting to final assembly (including a flag-holding hand AND tux tails 🧤🎩), we show you step-by-step how we brought Uncle Sam to life—leaner-style!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
[Music]
We just took two fence pickets and a
sketch and turn it into this patriotic
porch leaner and we'll show you how we
did it right now.
[Music]
What is up? Welcome back. Do you like to
do it, build it, or make it? So do we.
And today we have a request from Test
Cut Tuesday. It was a great idea and I
thought I would take it and run with it.
They wanted a six- foot tall Uncle Sam
patriotic porch leaner. So every
Tuesday, if you're not familiar, we do
test cut Tuesday where we cut a new door
round design. We cut it, we paint it
live, and we chat for an hour and see
how things go. This one's a little bit
bigger than a test cut Tuesday, so we
thought we'd give it its own video. And
we get a new porch cleaner, a new
patriotic one. I mean, I think it's
going to be a little big, bold,
beautiful, and pretty easy because it's
just going to be like two pickets and a
little bit of MDF. Step one, we're going
to gather all of our supplies. We needed
some 6ft tall fence pickets. These are
the dogeared pressuret treated kind that
you'd find outside at your your local
lumber store. Uhhuh. We also needed a
1x3. This is just a scrap. We just need
two little pieces of this thing. They're
going to be cross braces. Yep. Then we
needed some quarter inch MDF. This is
what we're going to make all of our
Uncle Sam pieces out of. You can get
this in our store at k&gmake.com. It is
the best MDF. It's light colored. Cuts
like butter. We're also going to use
some Starbond Thick. This is going to be
our temporary hold. And some wood glue
for a more permanent hold. Couple of
Well, I'll let you talk about that.
That's your favorite part. And of
course, our Foxy Hughes paints. We're
going to use these in our patriotic
colors here. Cunning cobalt, cussing
crimson, ash avenger. This is perfect
for this type of project because these
are outdoor house paints. So, they're
going to be UV resistant. He's not going
to fade while he's standing out there.
And it's going to be weather resistant.
So, it's going to be great. It's going
to really hold up to the elements if he
is outside. To help hold everything to
the pickets, we're going to use a
halfinch brad and brad the nailer. We're
also going to need to cut our two little
pieces down. So, we're going to need a a
little pocket saw to make our cuts. Now,
we don't have one yet, but we need a
tiny little flag. We're going to get it.
We'll have it by the end. And that is
it. Step two. We're going to make all of
our cuts. We just need two 11in pieces
of this 1x3. This might be a 1x4. It's a
scrap, but 1x4, 1x3, whatever it takes.
Well, you can find this in the lumber
yard, too, or outside at your Lowe's or
Home Depot. These are pressuret treated.
Now, this one is not, but it'll be fine.
It's going to hold it just fine. I mean,
I you could actually go find some 70%
off scraps over there in the scrap
aisle. Those might work. Mhm. We're
going to use our pocket saw to just cut
these two 11in pieces. Of course, you're
going to put on your safety glasses. Of
course, I'm putting on my safety
glasses. I was squinting. I like safety
glasses. Oh my gosh. One more cut. We
got to take this 1/4 in MDF over to the
Eon Nova 14 and cut out Uncle Sam's
body.
[Music]
Man, I love tabs. It makes removing
everything off the laser so much easier.
I
mean, isn't that easy? All right, let's
go pop it out. Step
three. Now we paint. First, we're going
to paint all of our MDF pieces. all of
these guys. And then while these are
drying, we'll paint our
pickets. I hid his eyeballs in his beard
because you can pop the eyeballs out.
And now the mustache should cover his
eyeball holes. Okay, smart. There you
go. So So turn it around so they can
see. Yeah. See, there's his eyeball.
Saves on weight. Actually, it saved on
space. I didn't know where to put the
eyeballs in the cut file, so I put them
in his mustache. Perfect. We're just
going to separate everything into colors
and then roll everything with the the
rollers. Two coats. Two coats of
paint.
[Music]
Our pickets are all painted white. Now
we're going to add some red stripes.
Starting from the bottom, we're going to
stripe them 31 in high using some 1in
paint. Got a 31 in inseam. He's That is
a That's quite a good inseam. He's
pretty tall guy. And then at about 45 in
for about a foot, we'll paint his face.
That's a big a face. Okay. And we're
going to use this blue tape for the
stripes. Now, we considered and we
negotiated on whether or not his pants
should be part of the kit, but that just
makes the kit longer, bigger, and
heavier. Like six 31 in stripes. We're
going to stripes with blue tape. We'd
have to puzzle piece them for desktops
and stuff.
[Music]
Everything's dry. Well, almost. The red
is almost dry. I added a second coat.
You ready to see if it bled underneath
the tape or not? Please tell me it
didn't.
Look at that. I mean, that is pretty
crisp. I'm going to say Oh, got a little
wonky down there, but I don't think
you'll notice that. Nope. Yes, great
job. It's all about having a dry roller,
not too much paint. It's looking good
for all people.
It's all about the dry roller.
All right. Look at those little red
striped pants. And you had the tape put
down really well. Yeah, I really mashed
the tape down. Use a little scraper to
really scrape it in there.
Well, I'm happy with that. Yeah, that
looks great. That looks great. Good job.
Step four, it's time to assemble. We're
going to flip these boards over face
down and we're going to attach these two
braces, one at the top, one at the
bottom. We're going to use some wood
glue and an inch and a half nail to
attach them. And we're going to use this
scrap wood as a spacer to know how far
from the bottom and how far from the top
to put our braces.
[Music]
Well, maybe just a a dab. A scooch.
Yeah, that's it. That's it. That's a
lot. That's awesome. It's a gallon. I'm
just trying to You know how hard it is
to drip a scooch out of a gallon? We're
using one of these little rubber
brushes. The glue will dry and you can
peel it off at the
[Music]
later. I think we need a brace right in
the middle. These are just a little bow.
And one more in the middle. will bring
that together even and keep it from
continuing to bow. And look, I got an
extra piece.
[Applause]
Now, we're going to flip it back over,
start laying out our kit, like his
jacket and all of his face pieces. We'll
use some wood glue to attach it. And
then a little half inch brad. The nail,
not the guy. A little halfinch brad to
make sure it doesn't go
[Music]
anywhere. I'm going to nail where I can
put the MDF back over top. So I'll hide
these nail holes. So where his jacket is
being attached to the board, the lapels
will go over it. Yep. Now I can just put
the lapel over it. Yeah. Do a couple
more right in there. I was going to fit
it all together before I put it down
permanently. Okay.
[Music]
So, the hand holding the flag has two
layers. One with a cutout to put the
little flag in. That's where you can
nail on top of that guy because it'll
have a top layer of the hand that'll
hide the nails.
[Music]
Looks like you gave him yellow hair.
He's a blonde. Blondes have more fun
here.
[Music]
Last piece. We got to add his tails to
his tucks. And they go on the back. All
right, Sam. So, these are his tails. And
they're going to go like this.
like continuing his jacket. You sure you
don't want to lay him down? Flip him
over.
Slap him up. Flip him. No, you go hold
him there for a second. Oh gosh. All
right. Oh gosh. Oh lord. Oh
lordy. We're in Kim. This just adds that
little bit of flare because we even
debated. He's wearing a tux. Mhm. And I
was like, I don't even think you need
that. And he was like, yeah. He's Uncle
Sam. He's super
classy. Boom. Uncle Sam, 6 foot tall.
Now, let's see if he can hold the flag
with his little flag hole hand. Bam.
Look at
that. He is one patriotic porch
leaner. He is easily six foot tall.
Man, this guy is going to be great at my
booth. I need to make another one and
put them both one on either side of the
door out front. Act as guards. Make
everybody salute when they come in.
Great job. He is awesome. All right. And
I'm glad I went with the paint stripes
just using the tape. Yes. Yeah. You
know, it might have been easier to use
the little kit to do it, but I think
that was just too much. It was just too
much. And piecing these pieces together
was plenty. I don't want to try to piece
those bottom pieces together either.
Well, I'm about out of time. I got to go
make another one of these Uncle Sams to
put next to the door. A big thanks to
the Make It Fam. We love you guys. That
is the best way to support this channel.
Oh, and guess what? This weekend is by
the time you see this, the Jamberee will
be going on full swing. Everybody will
be here. Everybody will be messing with
all the toys here. I cannot wait. We
will see you on test cut Tuesday and
again on studio session Sunday. Probably
not this Sunday though. Oh, he's still
kind of wet with with the glues. Oh,
wow. Oh. Oh, he's too tall. Yes. I don't
I got to do way down here. Wait. Oh. Oh.
Okay. He's balanced.
That was a lot of