Is the xTool Apparel DTF Printer worth it? 🤔 We dive deep into the 10 biggest doubts we’ve seen in the xTool community and put this all-in-one DTF printer to the test! 🎯
In this video, we tackle questions like: ✅ Is setup easy or a messy nightmare? ✅ How does it compare to screen printing & sublimation? ✅ Does the AI-enhanced software really make a difference? ✅ Can it automate maintenance and keep white ink from clogging? ✅ Is it fast enough to run a business? ✅ What about print quality and color accuracy?
🎨 We even test batch printing and explore how to bundle soft goods with laser-engraved products for a profitable business strategy!
📢 Want to start selling custom apparel? Watch till the end to see our final verdict!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
Do you have doubts about the X-Tool Apparel Printer? We're about to do a detailed deep
dive into the 10 deadliest doubts about the X-Tool Apparel Printer. Right now.
What is up? Welcome back. Do you like to do it, build it, or make it? So do we. And we have new
videos each week. And this week we're doing a detailed review of the X-Tool Apparel Printer.
We're taking a look at the internet's top 10 deadliest doubts. We found these on the X-Tool
Facebook group, and we've seen lots of comments. There's been a lot of chatter about this printer,
and we're excited to kind of go through some of those things. And we're going to do this in a
little different format. And we're going to play a little good cop, bad cop. Now, since I usually
make Kim be the bad cop, I'm going to play a bad cop this time. And I get to play good cop because
I am super excited about this printer, and I can't wait to share all the details about it.
I got to warn you, I'm not a very good bad cop. Right, he's the worst.
So what is the X-Tool Apparel Printer? It's an all-in-one, fully automatic DTF, which is direct
to film printer. It prints inks to a film, as you can see here, and then applies a powder coating to
the back. And it melts that powder coating and cools it so that it creates this transfer that
can be applied to any soft goods in the future. All right, so what can I make with this thing,
then? You can apply these transfers to any soft goods, cotton, polyester, denim, nylon.
You can put this on t-shirts, hats, hoodies, children's clothing, tote bags. These are great
for corporate gifts or community events or clubs and organizations. If you want to make t-shirts
and earn some extra money, this is a great way to do it. So this is a great way to bundle some
soft goods with some of the hard goods that I saw. Like when we did those thousand race medals,
if we could have offered some kind of soft good, a hat, a shirt, maybe not a thousand of them,
but we could have probably doubled our profit. Definitely. Trying to get into bad cop.
So what makes this apparel printer any different than screen printing or sublimation?
Well, with screen printing, you can't print photo quality images. You'll need multiple screens and
multiple ink colors. And there's lots of cleanup and equipment that's involved in screen printing.
For sublimation, you're required to use a polyester fabric or a polyester coating on some fabrics.
The blanks are costly and you can't sublimate on dark t-shirts. Sounds great. But my last printer
like this one, it was a mess to set up. I had to manually pull the inks. I got ink everywhere. It
was all over my hands for days. And then once I did get it to print, I'd have to manually put the
powder on and then bake it. And I'd have to watch it. Am I going to have to do the same type of thing here?
This printer is using all of Extool's innovation. It offers one-click ink filling, so it's fully
automatic ink initialization. No more manually pulling that ink through those tubes with your
syringe at the end. It offers automated printing to baking. It automates the process of applying
the powder, shaking the powder, and baking everything all in one step. You don't have to
touch it. It offers automatic film cutting, so once it's done creating and printing the transfer,
it automatically cuts the roll and then rolls it through the baking machine.
And in the future, it will offer roll printing, which means you don't have to cut each individual
sheet. And it offers automatic powder recovery. It innovatively recycles powder for reuse through
the automatic powder shaking. I'm sure I need some kind of special software that I have to crack
and create a secret folder on my machine just to get the machine to run. Extool's apparel printer
works with Extool's Creative Space. So if you're not familiar with Creative Space, it is the Extool
software that runs all of their lasers. It will now run the apparel printer as well. It's an
all-in-one software. One software for nesting, ripping the print, print control, and supports
both Mac and Windows. It also offers AI image generation. You can create unique designs directly
in the software. It also offers AI image enhancement, which enhances the image resolution and quality.
It also offers AI nesting optimization, smart nesting suggestions for better material efficiency.
And it's the first apparel printer with a built-in camera for auto calibration. It offers
a 16 megapixel AI camera so that it can accurately calibrate the print head. It will do its initial
print. It will scan it and know whether or not each color is printing as it's supposed to be.
If it's not, it'll automatically run a print head cleaning and run it again. And lastly, you can
operate the printer directly from the software, or it has a touchscreen control so you can use
touchscreen right on the printer or in the software. And what about the maintenance? The
maintenance on our last machine was twice a day. You had to keep that white ink moving. If it stood
still or dropped below 60 miles an hour, the bus was going to blow up. This printer offers automated
maintenance. It has a 24-7 auto maintenance feature, which means it automatically circulates
the white ink. It has a white ink management system, which is always keeping it stirring in
the ink well, as well as rotating through the ink hoses so there's no sediment. It offers an
automatic print head cleaning, so once a day it will turn on, run a print head cleaning, keeping
those print heads moist. And it offers print head capping, so when it's done printing, the base
raises up and caps those print heads so that they stay moist. It sounds easy to set up, it sounds
easy to use, and the maintenance sounds minimal. But I know something's going to happen. There's
probably no customer support. X-Tool now offers U.S.-based customer support in Irwindale, California.
They have an after-sales hotline available Monday through Friday from 9 a.m. to 6 30 p.m. Pacific
Time, and it's used for addressing all of your customer service inquiries and support needs
related to the X-Tool products. So how good do these prints actually look? The apparel printer
is using Epson i1600 dual print heads. It offers high-definition printing at 720 by 1800 dpi,
and it has advanced color control, which is ICC-based color calibration, which means that
each of your prints are going to come out consistent looking every time. So when we were doing printing
previously, sometimes the pink would be a little purple, sometimes the pink would be a little bit
red. But with the ICC-based color control system, your prints are going to come out consistent
every time. And they're working on a G7 certification, which is an international
color certification, which again is going to allow for consistent print every time. Okay,
the prints look good. How fast is this thing? Will I be able to run a business off of it?
It will print up to 50 square feet per hour with a print width of about 14 inches, which is perfect
for those A4 and A3 designs, for adult t-shirts, or even smaller prints for children's clothing,
accents, or for sleeves and pockets. And it has a very small footprint. It's only about less than
three feet wide, so it's like 35 inches, and less than two feet deep, which is 23 inches deep.
And it is significantly smaller than your traditional printers. I see that. All right, well that's great.
I'm saving some room, but what other type of equipment would I need to get going with this?
Well, if you're already using HTV, or heat transfer vinyl, or sublimation, then you probably already
have what you need, which is a heat press. So while this applies the inks and the glues on the back,
you now need to activate this glue so that it will attach to a t-shirt, and that's what the
heat press is for. And if you already have X-Tool products, it's also compatible with the X-Tool
ecosystem, which means it works with the latest X-Tool air filter, and the inline fan. So it
supports smart interaction, which means that when printing starts, the purifier and the fan
automatically activate, and it requires no manual intervention. Finally, the question that we saw
the most, is it worth it? Well, the price is less than or comparable to other printing solutions on
the market, but none of them have the compact footprint, high quality print heads, advanced
color calibration for consistent prints, fully automatic maintenance, like the X-Tool apparel
printer. It is perfect for small to medium-sized businesses. I mean, I have to say, I am impressed
with it. I don't have to play bad cop anymore. I got to play with it for the last couple of days.
Kim was messing with it for the last three weeks, but for the last two or three days, I got to play
with it. It is super easy. I really enjoy not having to mess with the powder, and I think it
takes up about a third of a floor space of another printer printing about the same size. I'm
going to say a third, because that shaker and everything really adds to the printer. Yeah,
it's a whole separate machine. This one being tucked up underneath. Yes. Genius. Yes. Genius.
And you can continue to print and bake, so I can run a print. When it's done, it's going to run
through the baking system, and I can start the next print. Oh, you know what we have not yet
tested? What? Is whether we can queue them up. You can. I did that while you were out getting
your hair done. So I did. I queued up a bunch of them, like 10 of them, and as it would clear,
as one would drop out the bottom, it would start the next print. So it did queue them up,
and that was great, because I didn't have to mess with it at all. Well, I'm super excited,
because now we'll have the opportunity to offer t-shirts as another part of our business.
We can now, like he said, bundle some of these corporate gift items or items for clubs and
organizations. We can offer the tumblers. We can offer the engraved cutting boards.
We can offer a t-shirt or a hat to go with something. We just did another wedding. We
could have offered some, you know, groomsmen t-shirts and stuff. Yeah, I was gonna say it
was a bridal party. It would have been fun to offer some, you know, I'm the bride t-shirt,
something like that. Something, just something to kind of bundle these things with. It really
gives us a hard side and the soft goods. And I'm so excited, because I know that they will
only continue to improve. I've seen that with their products. I've seen that with their software,
and I'm not just saying that. I'm super excited about what they have to offer,
and I can't wait to see what else they do with it. Oh yeah, I have so many ideas. Well,
we're about out of time. I gotta go make some more t-shirts. I think I'm gonna start myself
a bicycle clothing company. He's ready. Look, so many. We've done so many fun designs. I am
super impressed with the AI capabilities. Yeah, well, that and the printer. The one-click. I
loaded this PNG. Clickety-clack. I got myself a shirt. Big thanks to all of our patrons. We
love you guys. That is the best way to support this channel. That is a great community over
there. Super helpful, and everybody's super friendly. And if you're a patron,
I'll be putting up my graphics so you can start your own bicycle clothing company.
Or any of the AI images. We will put these on Patreon for our patrons to have
so that they can print and use them however. Well, this one wasn't AI. I actually made this