Taping a segmented highline with Inov Splits

HowNOT2
100 followers
3 Video Views·Jul 4, 2020
We tape 6x 50m pieces of webbing so we can rig a 275m highline at Elephant Rock. We add soft thimbles designed by https://aki-slacklines.de/en/. Filmed by Siva Rupa and Bobby Hutton
Live life high... safely. All the info is FREE at https://www.hownottohighline.com/
Would you like to watch me tape a segmented 300 meter line?
Check it out on this episode of How Not to Highline.
Hi I'm Ryan Jinks and welcome to my mess.
We are trying to tape six pairs of 50 meter sections together to make a total of 300 meters
of webbing and I want to show you how I'm doing that because it's kind of complicated
even though I love my segmented highlines.
So all of my webbing is in 50 meter sections with sew-in loops on both ends.
Whenever you buy webbing, even if you don't plan on doing big stuff,
get sew-in loops on both ends.
It makes your stuff, you could build off of it.
And I always like having sew-in loops on the static side of any highline that I'm doing.
Now the problem is if your main line is the same length as your backup line,
this is spider silk, it's lightweight, low stretch.
I like it for my backups.
It's kind of sharp for a main.
I like Feather Pro for my main but I also have Rainbow.
I believe this is Rainbow from Rad Slacklines.
So I'm going to kind of mix some webbings in here just to see what that feels like.
But in order to have your backup and your main the same length, you have to have extenders.
Now I'm not super sold on 6mm Amsteel for extenders.
We have lots of videos about this.
I'm not going to go into detail how to make these right now.
I am going to experiment with buying webbing extenders
and just putting loops to loop, loop to loop to extend my backups with soft shackles.
Now that we have soft thimble technology for McKee Slacklines.
So this is MK4 or Mantra or Flight or thick webbing, whatever the hell you want to call it.
When you squeeze it, it's pretty stiff.
It's stiffer than most of the other webbings I have.
So I have this scrap and what I do is I take about that much of it and I tape the end of it.
And then I burn it of course so it doesn't get all frayed up.
So then you just stick it inside and you make sure it's straight and you tape that.
Why would I do that you ask?
Because that just took a 29 kilonewton loop with a 5mm soft shackle,
the way I connect my Enov splits and makes it more strong,
stronger than this loop is actually rated for.
So this will actually break now or the soft shackle will break before it tears my loop apart.
We actually have a lot of break tests about that
and whether or not that's even safe to do.
I do believe that's safe now.
Yes, you have to tape this in place.
It's not going to stay without tape, but tape is magical.
So on this end, I have the very beginning, which is going to be after I make all my piles,
going to get flaked into a bag and that'll be the top of my bag.
Now you want to grab the roughest,
sharpest rocks you can to hold your segments in place so your webbing doesn't last very long.
But what I did was I flaked this really, really nice
and then I did this to keep this separated from the next pile.
I'm just going to continue to make piles on this tarp
and so I can flake it into a big haul bag at the end and I know that everything's correct.
Now what I have here is rocks damaging my webbing.
I write top main and top main on my webbing because this can get very confusing,
especially when you have different webbings in the system.
That's the Enov split.
We have lots of videos about that.
I'll show you this one time in this video.
I have to redo this because I don't have the soft thimbles in here.
So, but basically I just keep it all separated.
You don't want things twisted.
You don't want things getting turned inside out.
You don't want something to go inside of this loop.
It becomes a nightmare.
You really want this to be perfect.
So let me do one segment and then maybe either we'll time lapse it
or just show you the very end of the end result.
This is my second segment.
I'm going to set down and this is top main.
So I know red is top.
Now the backup is longer than the main.
This has already been taped.
I just have to make sure it's perfect.
So now I have a twist in the backup.
I'm not too worried about that.
Because it might be corrected on the other side.
If I have more than one twist, I'll try to fix it.
But I like where the backup slides in the main.
The tape stays on the main.
So this is normal slider tapes.
It's not reverse slider tapes.
I like that for segmented highlines.
Everyone's got an opinion on that.
If you have an opinion on that, put that in the comments below.
So you keep it flat and I'm not flaking this in the bag right now.
I'm just inspecting my webbing, inspecting my tapes
and making sure everything is perfect.
See that loop?
Guess the backup's longer than the main.
So I stretch it out.
I do have a light twist in there.
I don't care.
You just want to make sure your main is flat
and that you don't have, when you're all done,
your backup over your main in a way that you can't fix it
because you taped it wrong.
Because when the backup's sliding back and forth over that,
it can damage things, especially if it got windy.
If I do want to fix one of these twists that are really quite annoying,
I would just figure out which way I want to twist it,
pinch it, squeeze it under the tape, test it,
go one more time, pinch it, turn it, and now it's all fixed.
So the length I do is between three to five arm lengths.
So one, two, three.
And that's where my next tape is.
And I'll go three, three, five or three, five, three, five arm lengths.
You never really want to have everything consistent.
The irregularities of the loops helps absorb some of the wiggles.
Check to make sure your tapes are sliding.
This is fiber tape.
I can't break this.
So what I do is I just fold over the end just a little
so I can easily pull it off.
You can see that's what that flap is.
It's not poorly taped.
That's smartly taped.
So if I ever have to undo it, I can.
Might look janky, but it's well thought out.
It's not twisted.
Did you know you can repair your webbing by just sewing
about 10 bar tacks with 138 thread overlapping each other?
And it's full strength.
If you have a damaged section of your webbing,
you don't have to cry.
You just have to ship it to a slackline company to sew that for you.
When you find out what shipping costs, then you can cry.
Now, this is a different part of the taping process
is where I girth hitched my extender to my backup.
And in order to keep it in place, that's what that tape is for.
It can wiggle and jiggle and not go anywhere.
But I don't want that hanging there and try to pass over that with the ring.
So what I do is the reverse slider tapes that I just shit on.
So about right there, I will tape the sticky side on the backup.
You go about one inch over, come back around.
We have videos on this on how to tape slacklines.
It's a lot easier if you do this at home and not when all your friends
are waiting for you to go highline a 300 meter line.
OK, now that the sticky sides on the backup, you go over the main.
And why do I do that, you ask?
Why do you use electric tape?
Well, because if I have to fix something out there, I can.
I do it on both sides, so I do it here as well.
This side's a little tricky because it's round and this is flat.
So you actually go a little bit.
You can see that you want to fold that in right there,
then come back over.
It's a lot easier on the couch, but you definitely want to have about an inch.
Make sure you're flat and you're not screwing things up.
You don't want any sticky part on the part that's supposed to slide.
Hence slider tapes.
So now you can pull it back and forth, but this stays in place and can slide.
Now I want one tape on the extender holding up that loop.
And because that's not going to see much force, I like to use electric tape.
Now, I don't want these so close to each other,
so I'm going to move this now instead of dealing with it later.
OK, so I slid this down and I have just a little loop there and my loop here.
The reason I tied that knot is so I knew
that I could keep these together and what side was up.
Now I'm going to do the anode split to the next section and start taping it.
So here I flaked out the rainbow and spider,
and I'm going to add my extender on in order to girth hitch it.
I put the padded side on a padded loop in order to get more strength.
You go over that way, then you go in, and that's the strongest way to girth hitch.
And then you want to make sure the padding is touching the padding.
And then you tape that with I use climbing tape because it's really sticky
and it won't come off.
And that has proven to be super strong enough in our brake tests.
OK.
OK, let's put the soft shackles and connect the two pairs of webbings together now.
Smells good.
Got my two soft thimbles, which is done because I need three.
Ideally, you wouldn't spend your vacation time doing this.
You would do this at home.
Now I got my soft thimbles for one, two and three loops.
So I'm going to insert those before I connect anything.
Now I'm going to tape the shit out of this when I'm done.
So I don't need a lot to hold in the soft thimble for now.
That's bummer.
So I spent like a year with James Hogarth sewing stuff,
trying to figure out how to get like maximum strength out of a loop
and soft shackles because I like soft shackles on them.
It's lightweight.
I don't like having metal in a system.
So if I whip near this, it doesn't come and whack me.
But that is such a simple solution.
Stefan from McKee Slacklines, so smart.
This is going to be the top main.
So red will be up just because that's what we decided.
In order to do the split, you got to make this into an infinity sign or a figure eight shape.
So you go up inside one, you go inside of itself like that,
and then you don't want to screw this part up.
So let's make sure it's right first.
And this is a five millimeter soft shackle because that's super good enough.
Red up, red up.
And the reason we want that infinity shape is because we stick this soft shackle down
both loops of that and connect our backups to it.
In this case, that one and this one.
And that makes it cross redundant.
So if one side were to fail, it's still holding on.
We have a lot of videos about this because last year I was very excited about it.
But since I was doing this process, I wanted to make a fresh video,
mostly to bump the soft thimbles.
So I'm going to tape all these clothes.
You cannot tape SK-78.
It's the slippery Dyneema that Rad sells.
It's the stronger stuff, but it's more oily.
This is SK-75 from gotomarine.com.
I do not get a kickback if you buy from them.
They just are the cheapest place on the internet, at least for America.
So I'm going to tape this.
Tape sticks very, very, very, very, very well to that.
So pull that out and I just tape the throat of it so it does not come undone accidentally.
Now, if you've ever tried to undo a soft shackle with even just the slightest amount of tension,
you know, it's very difficult to undo them.
So I don't mind having the extra tape
to feel better when I'm walking across a thousand foot long high line.
So those are taped shut.
Now I'm going to tape them together so everything stays nice and neat.
I'm going to offset these.
These loops seem to be pretty big with all of this soft thimbling going on.
Now we may want to rope swing on this later.
So what I do before I tape this even more is I go in this thing while it's not tensioned,
because when that loop is tensioned, it's going to be pretty hard to fit anything in there.
I'm going to close that and I'm going to tape it back like this
or I can so I'm not stepping on it, put it underneath.
But that's going to be used as my ring stabilizer later,
which is in another video and a whole rope swinging thing later.
But I like to add that in while I can.
So those soft shackles are installed.
I'm going to tape those out of the way.
Lots of tape.
Hey, look, main and main.
Now, since I don't have a sharpie, I'm going to mark top main by just putting a green
random piece of tape right there.
And I know that means top.
So I know that means red is up.
So that's pretty much done.
So now before I start my next section, I'm going to use
more rocks and put that right there and then make my next pile and just keep going.
I want to see a time lapse of it.
So much for a time lapse.
It's hot.
Anyways, so we are putting this stuff in the bag and I realized that this line here
was flipped over the main because we had to fix the next section
and it looked like that and that would not have been fixable once it's rigged.
It's really nice to have everything flaked out on this tarp
and then flake it back into a bag very carefully and methodically.
It was easy enough to just
untape and retape.
And that's the moral of the story here is
take your time, do it right,
because really no fixing it without just completely de-rigging later.
Make sure you're packing your bags tightly as you go.
No, but seriously, like you definitely want to push this stuff down pretty hard
because I still have all that to go in here.
And this big haul bag is half,
it was more than half full before I started pushing it down.
So grab a friend, get in your bags and stomp.
We're not going to show you how to rig this whole thing,
but I'll show you what we've got set up here.
It's all well thought out, I think.
So this is the, let's see here,
right there is the 275 meter anchor here at Elephant Rock.
And this is the other side, the tension side.
And that is the 50 meter over there.
So welcome to Elephant Rock.
What we have here is the very end of the bottom of the bag
clipped here in case people need to let go in order to save their lives.
It'll go zoom and might damage the webbing,
but nobody dies, goes to the back.
And that is flaked to the bottom of the bag.
Coming out of the top here is going to go to,
we have a couple people here.
One person will be the brake system.
And it's going to go to that here, Bobby.
Bobby's our brake and our A-frame right now.
Going to this BAC, big ass carabiner.
And it's nice to have that friction and Z-drag.
And in order to have the proper amount of Z-drag,
we have the carabiner here as well.
And Bobby is our A-frame holding up this point to a bush in the past.
So if this gets pulled hard, it doesn't pull on Bobby.
And if there's any clusters here, he would be able to fix this.
And then this would be sent out over to me.
I'll be on that side.
And on this end, we have a swivel.
And I'll put a leash on this before we go.
So it keeps the top top and the swivel will get rid of all the twists.
So ideally, this whole thing should be flat when it comes over.
And we'll have somebody clipped into some climbing bolts here,
standing near the edge, making sure it's going out flat
and not abrading against the rock.
So that's it for basically how to tape and prepare a big piece of webbing.
Of course, if you're doing a smaller highline,
you could always just eliminate some of the Z-drags
or eliminate some of the complexity.
Six pieces of 50 meter pairs or 300 meters all fit in one big haulback.
You could technically fit in more,
but then it would be about 100 pounds or like 46 kilos.
And that's really hard to carry.
So think about storage and lifting and all that.
But anyways, if you like this video, make sure you click like.
If you have a question, leave it in the comments.
It helps guide what we do in the next videos.
And if you have a way to do this better or something I haven't thought of yet.
This is all experimental.
We love to learn.
Please leave that in the comments below.
Make sure you like, follow and subscribe on Instagram, Facebook and YouTube
because we're posting on all those platforms all the time.
Cheers.
Hey, thanks for watching.
But please don't be an idiot and try to go highlining or climbing
or repeat the stunts you see on this channel
without going with someone who knows what they're doing.
These sports come at a very high risk, but can be done safely.
And that's what this channel is devoted to.
Helping you understand what you're looking at
when you do get the chance to learn from somebody in person.
We have tons of resources.
They're all free and they're all at HowNotToHighline.com.
We have the Bolting Bible, which we just finished.
And it's 133 pages, 426 photos, 216 links that work.
It's super thorough if you want to learn bolting.
And we also have Highline University International, which is all free courses now.
And Highlining 101 is done.
How to use a highline that's already rigged.
And we are doing the anchors and rigging and rope jumping and space nets
and more simultaneously with a large group of people
now that we've made this open source.
It's going to be just like the Bolting Bible.
It's going to have lots of photos, lots of links
and literally everything on the topic.
We also have a way to get you plugged into the Slackline community.
We have a list of Facebook groups on slackademics.com
that you can hit control F, find your area and find the groups
that all coordinate when and where they're going slacklining
so you can get connected with our Slack family.
Another free book we have on hownottohighline.com is the book of Slack.
There is some Slack religious stuff at the beginning because we think that's funny,
but the rest of it is about flow state and about the history of Slackline.
It's a thorough, deep book.
It's awesome.
Go check that out.
And no, I don't make money on YouTube.
You need millions of subscribers just to make a living at it.
I do this for a fun hobby and because I really want the information
that I wish I had when I started available for the next generation.
We believe that safe information should not be withheld for only those who can afford it,
but it does cost thousands of dollars a year to run this channel.
Bolt Busters cost me like $10,000, Slack Snap ain't cheap,
and the websites cost money and yada yada.
If you're watching all the episodes, please become a Patreon on patreon.com.
And if you take the courses, please donate $20.
If you've gone all the way through and benefited from it,
and if you read the entire bolting Bible, learn how to bolt and bolted something
without having to go through a learning curve, wasting money, please donate 20 bucks on PayPal.
We literally only survive off of donations for this channel.
I did recently start a specialty instant coffee business with my friend.
It's great for camping.
It's great for van life.
It's great for everyday drinking.
It's really great espresso.
We freeze dry it.
All you have to do is add water and you can get our coffee at brewjuno.com.
And make sure you like us on Facebook and follow us on Instagram and subscribe to us
on YouTube because we are posting stuff all the time and don't forget to smash that like button.
Cheers.
