Restoring a Clock Case Panel - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
5 Video Views·Oct 25, 2013
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine makes veneer repairs to a front panel from a monumental, late Victorian, nine-tubular bell hall clock, and even recreates the piece's original, amber patina. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
This is a marquetry panel. It's been removed from the case of a monumental
late Victorian nine tubular bell hall clock. I just have the panel to make some
veneer repairs. I've got loose veneer here and I'm missing a piece here. One of
the upper decorative panels has been removed and sent to me also because I've
got to try to match the finish and patina of this.
One thing you'll notice is that the colors of the marquetry now in this
panel are a lot brighter than the sample and we're going to have to address that
issue. All right I've put two coats of shellac on the panel. I'm going to sand
it with 500 paper. Then I'm going to do some little touch-ups I have to do and
then I'm going to glaze it with an umber glaze. I'm going to use an umber glaze to
try to tone this whole thing down a little bit. You can see how the glaze
just toned the whole thing down a little bit. It still looks great. It looks older
now, not so newly finished. What I'm trying to do here is leave a very very
thin layer of this glaze on here to tone this down. I don't want to brush on a
finish because it might disturb the glaze. I'm going to use an aerosol toner,
a raw umber toner, to even further help tone down the colors a little bit. This
definitely has an orangey cast to it, a very amber cast to it. My next
coat of shellac will be garnet shellac, which is an unprocessed shellac so it
has a lot more color in it, very similar to the color I see in the sample. The
garnet shellac has definitely given it this old, a little more aged look. Okay I
put on about four or five coats of shellac, sanding between coats and
waiting a day or two between each coat, and now I'm going to sand with 500 and
rub it out. Okay now I've finished sanding with 500 and I'm going to take
some 4-0 steel wool dry and buff this out. Okay I've done the whole piece with
dry steel wool. Now I'm going to get a fresh piece of steel wool and with my
beeswax polish go over it. All right, I think I'm done here. The garnet
shellac really brought the color in great with my sample. Looks pretty good.
